Bosch Appliances XF Monitor streaming connection, 4.6.2CVBS, 4.6.3, Specifications

Divar XF Hardware setup en 27

Specifications

Output signal: VGA

Resolution: 1280 x 1024 (monitor A), 1024 X 768 (monitor B)

Color: True color (32 bit)

Connector type: DE-15

B

A

VGA

Figure 4.8 VGA monitor connectors

4.6.2CVBS

Connect the unit to CCTV monitors using 75 ohm video coaxial cables with BNC connectors. The unit provides a 1 Vpp CVBS signal.

If the monitor has a loop-through connection and you are not using the loop-through output, then select the 75 ohm impedance setting on the monitor. If the monitor's loop-through output is connected to an additional device, the device's termination is set to 75 ohm and the monitor's termination is set to high impedance. (Note that this is not necessary on devices with automatic termination.)

Specifications

Output signal: Composite video 1Vpp, 75 ohm, Sync. 0.3Vpp ±10%

Resolution: 720 x 576 PAL, 720 X 484 NTSC

Connector type: BNC

B

		A
	CVBS
	Figure 4.9		CVBS monitor connectors
4.6.3	Y/C
	Connect the unit to a CCTV monitor with Y/C input, using a standard Y/C connection cable.
		B
		A
	Y/C
	Figure 4.10		Y/C monitor connectors
4.7	Monitor streaming connection
	To connect a monitor in a remote streaming configuration, connect the CVBS monitor output
	to a video input. Then connect the monitor to the corresponding loop-through connector.

Bosch Security Systems Installation manual F.01U.135.429 2.5 2009.08