Divar XFTable of Contents en 5
6.2.1 | Channels 1 to 8 (or 1 to 16) | 56 |
6.2.2 | Channels 9 to 16 (or 17 to 24) | 57 |
6.3 | Schedule | 58 |
6.3.1 | Setting the dynamic characteristics | 58 |
6.3.2 | Schedule | 58 |
6.3.3 | Exceptions | 59 |
6.4 | Recording | 59 |
6.4.1 | Normal | 60 |
6.4.2 | Contact | 60 |
6.4.3 | Motion | 60 |
6.4.4 | Copy | 60 |
6.5 | Contacts | 61 |
6.5.1 | Contact inputs | 61 |
6.5.2 | Relay outputs | 61 |
6.5.3 | Contact input properties | 61 |
6.6 | Motion | 62 |
6.7 | Event | 63 |
6.7.1 | General | 63 |
6.7.2 | Contact | 64 |
6.7.3 | Motion | 64 |
6.7.4 | Video loss | 64 |
6.7.5 | Copy | 65 |
6.8 | Network | 65 |
6.8.1 | Setup | 65 |
6.8.2 | IP Range | 66 |
6.8.3 | Monitor Streaming | 66 |
6.9 | Storage | 67 |
6.9.1 | Status | 67 |
6.9.2 | Settings | 67 |
6.9.3 | Service | 67 |
6.10 | Users | 67 |
6.10.1 | General | 67 |
6.10.2 | Administrator | 67 |
6.10.3 | User 1 - 7 | 68 |
6.11 | System | 68 |
6.11.1 | Service | 68 |
6.11.2 | Serial ports | 68 |
6.11.3 | Licenses | 68 |
6.11.4 | Logging | 69 |
|
|
|
7 | Using the Configuration Tool | 71 |
7.1 | Getting started | 71 |
7.1.1 | System requirements | 71 |
7.1.2 | Installing the Configuration Tool | 71 |
7.1.3 | Starting the Configuration Tool | 71 |
7.2 | How to log on | 71 |
7.2.1 | Menu structure differences | 73 |
7.3 | Introducing the main window | 73 |
7.3.1 | Overview button | 74 |
Bosch Security Systems | Installation manual | F.01U.135.429 2.5 2009.08 |