66 en Advanced configuration menuDivar XF
| – If DHCP is disabled, fill in the IP address, the Subnet mask, the Default gateway, and the |
| DNS Server address. If required, change the default HTTP port (80) to a new value. |
| – Restrict the network bandwidth by entering a Mbps value between 0.1 and 100 for the |
| Bandwidth limit. |
| – The MAC address is read only; it shows the MAC address of the DVR. |
| – Cable connected shows the status of the physical network connection. |
6.8.2 | IP Range |
| – Eight IP ranges can be entered to allow access. |
| – Enter the same begin and end address to specify a single IP address. Enter different |
| begin and end addresses to specify an IP address range. |
6.8.3 | Monitor Streaming |
| The remote monitor streaming function allows monitor output A and/or B to be streamed |
remotely via one or more of the analog video inputs. The main advantage of using this feature is that
Each of the analog video inputs can be configured as:
– Camera input (default).
– Streaming output A (input is used to stream monitor output A).
– Streaming output B (input is used to stream monitor output B).
Note:
Disable the recording of a channel used for monitor streaming in the Recording tab.
Figure 6.10 Network menu - Monitor streaming
F.01U.135.429 2.5 2009.08 | Installation manual | Bosch Security Systems |