Bosch Appliances XF Audio connections, Monitor connections, 4.6.1, Specifications

26 en Hardware setup Divar XF

terminating. There is no need to add a terminator to the output connector if no additional equipment is connected.

If the camera signal is looped-through to additional equipment, make sure that the end of the video line is terminated with 75 ohm termination.

The DivarXF automatically configures itself as a PAL or NTSC unit. The unit determines the standard by detecting the signal format of the first connected camera (lowest camera input number).

Specifications

Input signal: Composite video 1 Vpp, 75 ohm

Color standard: PAL/NTSC, auto-detect

Gain control: Automatic or manual gain control for each video input

Connector type: BNC looped-through, automatic termination

1	2	3	4	5	6	7	8
				Video in
1	2	3	4	5	6	7	8
				Video out

Figure 4.5 Eight video inputs with loop-through outputs

4.5	Audio connections
		The DivarXF supports up to 16 audio inputs and 4 audio outputs. Connect using audio cable
		with RCA compatible connectors.
		Specifications
		Input signal: Mono RCA, 1 Vpp, 10k ohm
		Output signal: Dual mono RCA, 1 Vpp, 10k ohm
	1		3	5	7	9	11	13	15

2 4 6 8 10 12 14 16 Audio in

Figure 4.6 Audio input connectors

L

R

AB

Audio out

Figure 4.7 Audio output connectors

4.6	Monitor connections
	Up to two monitors can be connected through the VGA, CVBS, or Y/C connections.
4.6.1	VGA
	Connect the unit to one or two VGA monitors using standard VGA cable. It is advised to use
	17” monitors or larger when using LCD(s).

F.01U.135.429 2.5 2009.08 Installation manual Bosch Security Systems