Bosch Appliances XF 6.4.1Normal, 6.4.2Contact, 6.4.3Motion, 6.4.4Copy, No recording

Page 60
6.4.1Normal

60 en Advanced configuration menu

Divar XF

 

 

6.4.1Normal

Set values for each of the following fields:

Normal recording mode:

Continuous - set to record continuously

Event only - set to record events only

No Recording - set to disable recording

Pre-Event Time:

set between 1 and 120 seconds (only applicable when recording Event only)

Resolution:

set the video resolution to 4CIF (704 x 576/480 PAL/NTSC), 2CIF (704 x 288/240 PAL/NTSC), or CIF (352 x 288/240 PAL/NTSC).

Quality:

set the video quality setting to High, Medium or Standard.

Frame rate:

set the video frame rate to 25/30, 12.5/15, 6.25/7.5, 3.125/3.75 or 1/1 ips (images per second in PAL/NTSC).

Record audio:

check to enable audio recording.

Audio quality:

set the audio quality to High, Medium or Standard.

Note:

For information on bit rates, refer to .......

6.4.2Contact

The fields have the same parameters as those under the Normal tab. Additional fields are present for contact recording.

Contact recording:

Fixed duration - activates recording for the set duration from the start of the event.

Follows + Post - activates recording as long as the event is active and continues after the event becomes inactive for the time set in the duration field.

Follows - activates the recording only as long as the event is active.

No recording

Set the duration time in minutes and seconds.

6.4.3Motion

The fields have the same parameters as those under the Normal tab. Additional fields are present for motion recording.

Motion recording:

Fixed duration - activates recording for the set duration from the start of the event.

No recording

Set the duration time in minutes and seconds.

6.4.4Copy

The copy recording settings function makes it easy to set up recording for all profiles and all cameras. The copy function copies content from within a single profile to other profiles. The camera inputs and the recording modes within each of these profiles can be selected.

To copy recording settings:

1.Check the Copy multiple cameras box if you wish to copy several camera inputs within the From profile.

2.Select the profile number to copy from.

F.01U.135.429 2.5 2009.08

Installation manual

Bosch Security Systems

Image 60
Contents en Installation manual Divar XFDigital Hybrid Recorder Page Table of Contents SafetyQuick install Hardware setupAdvanced configuration menu Operating instructionsUsing the Configuration Tool Menu default values Technical specifications1Safety Important safety instructionsSafety precautions Important NoticesDANGER Class I Laser Product Coax groundingFCC and UL Rack-mountFCC & ICES Information U.S.A. and Canadian Models OnlyINFORMATIONS FCC ET ICES DisclaimerBosch notices CopyrightTrademarks More informationFeatures IntroductionDigital video recorder for security applications 2.1.1Package contents Unpacking2.1.4 On-screenhelpInstallation environment Power SupplyAssociated equipment 2.3.1Installation manual 16 en IntroductionDivar XF F.01U.135.429Quick install ConnectionsPowering up Primary connectionsQuick install menu First-timeuse3.3.1 International3.3.2Schedule LanguageTime zone Time format3.3.3Recording 3.3.4Network DVR name22 en Quick install Installation manualDivar XF F.01U.135.429Hardware setup Desktop installationRack mounting MountingHard disk installation 4.3.1Mounting instructions Removing the front panel4.4Camera connections Placing a hard diskRemounting the front panel Specifications Audio connectionsMonitor connections 4.6.1Monitor streaming connection 4.6.2CVBSSpecifications SpecificationsSignal name RS232 COM port connectionsKeyboard connections Pin numberSignal 4.10Ethernet connection Termination4.12Biphase port 4.11RS485 port Signal nameBIPHASE SpecificationsSignal name Pin numberUSB connectors External alarm I/O connectionConnecting the inputs Connecting the alarm outputsALARM I/O Signal namePin number DescriptionPower supply 4.17Maintenance4.15 Malfunction relayOperating instructions Front panel controls5.1.1Keys Arrow keysOSD key Indicators Mouse Controls5.1.2 Viewing pictures 5.3.1Monitor A 5.3.2Multiscreen Full-screenSequence Cameo assignmentAccessing playback functions Live and playback5.4.1 Live modeConfiguration Overview of the menu systemSearch ExportAccess using the front panel keys Access using the mouseAccess using the Intuikey keyboard Search5.6.1 Date/time search5.6.2 Event searchSearch criteria Search results5.7Export 5.8Configuration Monitor settings5.8.1 Display optionsSystem information Event displaySequence Video signals 5.9.1StatusVersion Info Storage status5.9.2Logbook SensorsSensor name Lower limit5.10 Event handlingLogbook results Background events5.10.1Alarms Acknowledging an alarmVideo loss alarm If a contact input causes an alarmIf a motion detection signal causes an event If the loss of a video signal causes an alarm6Advanced configuration menu Left tabsTop tabs International6.1International 6.1.1Language54 en Advanced configuration menu Installation manual6.1.2Time/date 6.1.3Time Server Enable video input Video & Audio6.2.1 Channels 1 to 8 or 1 toEnable audio input 6.2.2Channels 9 to 16 or 17 toContrast IP cameraSetting the dynamic characteristics Schedule6.3.1 6.3.2Schedule6.4Recording 6.3.3Exceptions6.4.1Normal 6.4.2Contact6.4.3Motion 6.4.4CopyNo override default 6.5Contacts6.5.1 6.5.26.6Motion Auto acknowledge alarms Alarm dwell time6.7Event 6.7.1GeneralSound beeper on alarm Actions when entering this profile6.7.2Contact 6.7.3Motion6.8.1Setup 6.8Network6.7.5Copy 6.8.2 IP Range6.8.3 Monitor Streaming6.9.2Settings 6.9.3Service6.10.2Administrator 6.9StorageService 6.11System 6.10.3Log contacts -Log motion -Log remote access 6.11.4LoggingAdvanced configuration menu en Installation manual70 en Advanced configuration menu Installation manualDivar XF F.01U.135.429Using the Configuration Tool How to log onInstalling the Configuration Tool Starting the Configuration ToolTo modify the Divar XF list 7.3Introducing the main window 7.2.1Menu structure differences Log onSettings button Click SettingsUsing the Menu tree 7.3.17.4Using the control buttons Service buttonClick Service Refining settingsFactory Defaults Refresh76 en Using the Configuration Tool Installation manualMenu default values Quick install menu defaultsSetting Default valueMonitor view settings defaults Configuration menu defaultsSetting Default valueSetting Default valueReset NavigationSetting Default valueReset NavigationSetting Default valueReset Navigation82 en Menu default values Installation manualDivar XF F.01U.135.429Technical specifications Voltage and PowerAlarm Handling ElectricalConnectors StorageElectromagnetic and Safety Accessories Optional9.1.1 Mechanical9.1.5 Video bitrates bpsPage Bosch Security Systems Robert-Koch-Straße100 D-85521OttobrunnGermany Telefon
Related manuals
Manual 264 pages 30.98 Kb Manual 7 pages 2.9 Kb

XF specifications

Bosch Appliances is a leading brand in the home appliance industry, known for its blend of innovation, technology, and design. Among its extensive lineup, the Bosch Appliances XF and DN series stand out for their premium features, reliability, and avant-garde technology.

The XF series is characterized by its sleek and modern design, which seamlessly integrates into any kitchen décor. One of its main features is the enhanced energy efficiency that conforms to the strictest energy standards. With eco-friendly technologies, these appliances help reduce power consumption while maintaining optimal performance. Many models in this series are equipped with the EcoSilence Drive, a powerful yet quiet motor that ensures efficient operation without disturbing the peace of your home.

In terms of technology, the XF series incorporates advanced cooking systems, like the AutoCook function, which takes the guesswork out of meal preparation. This feature allows users to select meals from a preset menu and the appliance automatically adjusts the time and temperature, ensuring perfect results every time. Additionally, the series often includes sensors that monitor dish progress, helping to avoid overcooking.

Meanwhile, the DN series focuses on durability and precision. Built with high-quality materials, these appliances are not only designed to last but also to perform consistently. A key characteristic of the DN series is its intuitive user interface, designed for easy navigation and control. Touch displays allow for straightforward adjustments and settings, enhancing the overall user experience.

Another standout feature is the self-cleaning technology, commonly found in the DN series ovens. This innovation simplifies maintenance by using high temperatures to turn food residue into ash, which can easily be wiped away, saving time and effort for users.

Both series are also equipped with innovative safety features, including child locks and automatic shut-off functions, ensuring peace of mind for families.

In summary, Bosch Appliances XF and DN series exemplify the perfect union of style, functionality, and cutting-edge technology. They cater to the needs of modern consumers, prioritizing efficiency, ease of use, and durability, making them an excellent choice for anyone looking to elevate their kitchen experience. With Bosch, you can trust that every meal will be a culinary delight, delivered with reliability and precision.