Bosch Appliances XF installation manual Class I Laser Product, Coax grounding

Page 9
Class I Laser Product

Divar XF

Safety en

9

 

 

 

disconnect device for switching off the voltage to the unit.

Battery replacement - For qualified service personnel only - A lithium battery is located inside the unit enclosure. To avoid danger of explosion, replace the battery as per instructions. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of the replaced battery in an environmentally friendly way and not with other solid waste. Refer all servicing to qualified service personnel.

CAUTION!

Class I Laser Product

Invisible laser radiation when open. Avoid exposure to beam.

Coax grounding:

Ground the cable system if connecting an outside cable system to the unit.

Connect outdoor equipment to the unit's inputs only after this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source.

Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal.

Follow proper safety precautions such as grounding for any outdoor device connected to

this unit.

U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

CAUTION!

This device is intended for the use in public areas only.

U.S. federal law strictly prohibits surreptitious recording of oral communications.

Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these units at an environmentally compatible recycling facility, per European Directive 2002/66/EC.

Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible. Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid electrostatic discharge.

NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostatic-sensitive printed circuit boards.

Fuse rating - For security protection of the device, the branch circuit protection must be secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60).

Grounding and polarization - This unit may be equipped with a polarized alternating current line plug (a plug with one blade wider than the other blade). This safety feature allows the plug to fit into the power outlet in only one way. If unable to insert the plug fully into the outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized plug.

Bosch Security Systems

Installation manual

F.01U.135.429 2.5 2009.08

Image 9
Contents en Installation manual Divar XFDigital Hybrid Recorder Page Safety Table of ContentsQuick install Hardware setupOperating instructions Advanced configuration menuUsing the Configuration Tool Technical specifications Menu default valuesImportant safety instructions 1SafetySafety precautions Important NoticesDANGER Coax grounding Class I Laser ProductRack-mount FCC and ULFCC & ICES Information U.S.A. and Canadian Models OnlyDisclaimer INFORMATIONS FCC ET ICESCopyright Bosch noticesTrademarks More informationIntroduction FeaturesDigital video recorder for security applications 2.1.1Unpacking Package contents2.1.4 On-screenhelpPower Supply Installation environmentAssociated equipment 2.3.116 en Introduction Installation manualDivar XF F.01U.135.429Connections Quick installPowering up Primary connectionsFirst-timeuse Quick install menu3.3.1 InternationalLanguage 3.3.2ScheduleTime zone Time format3.3.3Recording DVR name 3.3.4NetworkInstallation manual 22 en Quick installDivar XF F.01U.135.429Desktop installation Hardware setupRack mounting Mounting4.3.1 Hard disk installationMounting instructions Removing the front panel4.4Camera connections Placing a hard diskRemounting the front panel Audio connections SpecificationsMonitor connections 4.6.14.6.2CVBS Monitor streaming connectionSpecifications SpecificationsRS232 COM port connections Signal nameKeyboard connections Pin number4.10 SignalEthernet connection Termination4.11 4.12Biphase portRS485 port Signal nameSpecifications BIPHASESignal name Pin numberExternal alarm I/O connection USB connectorsConnecting the inputs Connecting the alarm outputsSignal name ALARM I/OPin number Description4.17Maintenance Power supply4.15 Malfunction relayFront panel controls Operating instructions5.1.1Keys Arrow keysOSD key Indicators Mouse Controls5.1.2 5.3.1 Viewing picturesMonitor A 5.3.2Full-screen MultiscreenSequence Cameo assignmentLive and playback Accessing playback functions5.4.1 Live modeOverview of the menu system ConfigurationSearch ExportAccess using the mouse Access using the front panel keysAccess using the Intuikey keyboard SearchDate/time search 5.6.15.6.2 Event searchSearch results Search criteria5.7Export Monitor settings 5.8Configuration5.8.1 Display optionsSystem information Event displaySequence 5.9.1Status Video signalsVersion Info Storage statusSensors 5.9.2LogbookSensor name Lower limitEvent handling 5.10Logbook results Background eventsAcknowledging an alarm 5.10.1AlarmsIf a contact input causes an alarm Video loss alarmIf a motion detection signal causes an event If the loss of a video signal causes an alarmLeft tabs 6Advanced configuration menuTop tabs International6.1.1Language 6.1International54 en Advanced configuration menu Installation manual6.1.2Time/date 6.1.3Time Server Video & Audio Enable video input6.2.1 Channels 1 to 8 or 1 to6.2.2Channels 9 to 16 or 17 to Enable audio inputContrast IP cameraSchedule Setting the dynamic characteristics6.3.1 6.3.2Schedule6.3.3Exceptions 6.4Recording6.4.2Contact 6.4.1Normal6.4.3Motion 6.4.4Copy6.5Contacts No override default6.5.1 6.5.26.6Motion Alarm dwell time Auto acknowledge alarms6.7Event 6.7.1GeneralActions when entering this profile Sound beeper on alarm6.7.2Contact 6.7.3Motion6.8.1Setup 6.8Network6.7.5Copy IP Range 6.8.26.8.3 Monitor Streaming6.9.3Service 6.9.2Settings6.10.2Administrator 6.9Storage6.11 ServiceSystem 6.10.36.11.4Logging Log contacts -Log motion -Log remote accessAdvanced configuration menu en Installation manualInstallation manual 70 en Advanced configuration menuDivar XF F.01U.135.429How to log on Using the Configuration ToolInstalling the Configuration Tool Starting the Configuration ToolTo modify the Divar XF list 7.2.1 7.3Introducing the main windowMenu structure differences Log onClick Settings Settings buttonUsing the Menu tree 7.3.1Service button 7.4Using the control buttonsClick Service Refining settingsRefresh Factory Defaults76 en Using the Configuration Tool Installation manualQuick install menu defaults Menu default valuesSetting Default valueConfiguration menu defaults Monitor view settings defaultsSetting Default valueDefault value SettingReset NavigationDefault value SettingReset NavigationDefault value SettingReset NavigationInstallation manual 82 en Menu default valuesDivar XF F.01U.135.429Voltage and Power Technical specificationsAlarm Handling ElectricalStorage ConnectorsAccessories Optional Electromagnetic and Safety9.1.1 MechanicalVideo bitrates bps 9.1.5Page Robert-Koch-Straße100 D-85521Ottobrunn Bosch Security SystemsGermany Telefon
Related manuals
Manual 264 pages 30.98 Kb Manual 7 pages 2.9 Kb