Divar XFUsing the Configuration Tool en 71
7 | Using the Configuration Tool | |
| The Configuration Tool is a software application that makes the installation and configuration | |
| of a unit faster and easier. The Configuration Tool runs on a PC that is connected to the | |
| Divar XF via an Ethernet network connection. | |
| Although all settings can also be configured with the | |
| itself, the Configuration Tool offers a very | |
| settings to be saved on the PC hard disk. These can be restored later and used to configure | |
| other units. | |
7.1 | Getting started | |
| To use the Configuration Tool to change settings, connect the unit to a PC via a network | |
| connection. The Configuration Tool application must be installed on the PC. | |
7.1.1 | System requirements | |
| Operating platform: A PC running Windows XP or Windows Vista. | |
| For the Configuration Tool, the recommended PC requirements are: | |
|
| – Processor: Intel Pentium 4 or comparable |
|
| – RAM memory: 512 MB |
|
| – Free hard disk space: 10 GB |
|
| – Graphics card: NVIDIA GeForce 6200 or higher |
|
| – Network interface: |
7.1.2 | Installing the Configuration Tool | |
| The Configuration Tool is optionally installed on the PC when the Control Center application | |
| is installed. To install separately: | |
| 1. Insert the | |
|
| – The installation program starts automatically. |
| 2. | If installation does not start automatically, locate the Setup.exe file on the CD and double |
|
| click it. |
| 3. | Follow the instructions on the screen and select the install Configuration Tool when |
|
| asked to complete the installation. |
7.1.3 | Starting the Configuration Tool | |
| Network connection | |
| To start the Configuration Tool without using the Control Center, double click the | |
| Configuration Tool icon on the desktop window to start the program. Alternatively, select the | |
| Divar XF Configuration Tool program via the Start button on the task bar and the Programs | |
| menu item. Follow the log on procedure. | |
| To start the Configuration Tool via the Control Center, click the Config button in the Control | |
| Center window. This shows a CT log on dialog with all known Divar XF devices. | |
| Offline configuration | |
| To log on with an offline configuration, select the Divar XF version, model, the video standard, | |
| and the cameras that are connected. | |
7.2 | How to log on | |
| When starting the Configuration Tool via a network, the Log on window appears. (Click | |
| Cancel to discontinue log on and exit the application.) |
Bosch Security Systems | Installation manual | F.01U.135.429 2.5 2009.08 |