Chariot Carriers Chariot Baby Seat manual Securing on the CX1 and Cougar1 models

Page 54

Finally pull all fastening straps tight. (Once you have opened out the trailer body again.)

If you want to adjust the seat to a flatter position, loosen both of the top fastening straps and pull the other four straps tight. If you want an adjustment of greater incline, the procedure is the same but reversed.

Please note: Make sure you check all belt buckles are tight.

	Please note:
	Never transport your
	children without the safety
	belts being properly and
	fully adjusted, otherwise
	your child could be
	seriously or even fatally injured
Fully fitted baby seat.	in the event of an accident!

3.2.2 Securing on the CX1 and Cougar1 models

Correct positioning of the baby seat.

First connect the fastex buckles on the underside of the baby seat with their counterparts on the lap belt ends.

Experience has shown that it helps if an overall belt length adjustment of more or less 15 to 16 cm is made (measured from the point of attachment to the baby seat to the point of attachment to the trailer seat).

First pull one of the two straps at the front end of the baby seat through the corresponding D-ring.

54

Illustration A

Thread the end of the strap as shown in the above illustration through the fastener in the baby seat and gently pull the strap tight.

Fit the second strap in exactly the same fashion. Now pull both straps tight so that the baby seat is positioned cen- trally.

Image 54

Contents Vanaf bouwjaar Benutzerhandbuch Gebruikershandleiding Owner‘s manualAb Modelljahr Models from 2006 onwardsInhaltsverzeichnis / Inhoud / Table of contents Sicherheitshinweis Montageanleitung Chariot BabysitzAchtung Produktionsbedingte Änderungen vorbehalten Lieferzustand HinweisVorbereitende Schritte Lösen der Befestigungsgurte am BabysitzEinbau in die zweisitzigen Chariot-Fahrzeuge Montage der TeleskopstangeAchtung Ansicht von vornBefestigung des Babysitzes Befestigung in den Modellen Comfort und Cheetah2Und ziehen Sie das Gurtband Befestigung in den Modellen Cabriolet, CX2 und Cougar2 Page Seitliche Positionierung Ansicht von innen, Sitz zur Demonstration hochge- klappt Ziehen Sie abschließend alle Befestigungsgurte stramm anMittige Positionierung Befestigung der Sicherheitsgurte Einbau in die einsitzigen Chariot-Fahrzeuge Montage der D-RingeBefestigung im Modell Cheetah1 Page Befestigung in den Modellen CX1 und Cougar1 Fertig montierter Babysitz Verletzungen erleidenPage Fertig montierter Babysitz Verletzungen erleiden Anschnallen des Babys und Einstellen der Sicherheitsgurte Bei den Modellen Cheetah1, Cheetah2 und ComfortSicherheitshinweise PflegehinweiseFalten der Chariot-Fahrzeuge Inhoud De baby vastmaken en de veiligheidsgordels afstellenWordt als volgt geleverd Inbouwinstructies Chariot BabyzittingVeiligheidsaanwijzing OpmerkingVoorbereidende stappen De bevestigingsriemen losmakenMontage in de tweezits Chariot voertuigen Inbouw van de telescoopstangVooraanzicht Bevestiging van de babyzitting Montage in de Comfort en Cheetah2Afbeelding staat aangegeven… Montage in de Cabriolet, CX2 en Cougar2 …en trek de riem iets aan Montage aan de zijkant Trek daarna alle bevestigingsriemen strak aan Montage in het midden De veiligheidsgordels bevestigen Installatie van de D-ringen Montage in de éénzits Chariot voertuigenMontage in de Cheetah1 Page Bevestiging in de CX1 en Cougar1 Page Volledig ingebouwde babyzitting verwondingen oplopen De baby vastmaken en de veiligheidsgordels afstellen Voor de Cheetah1, Cheetah2 en ComfortVeiligheidsaanwijzingen VerzorgingDe Chariot aanhangers opvouwen Table of contents Parts supplied Safety noteFitting Instructions Chariot Baby Seat Baby seat is not designed to be fitted to older modelsPreliminary steps Undoing the Baby Seat Securing StrapsFitting to Two Seater Chariot Trailers Fitting the Telescopic TubePlease note Front viewSecuring the Baby Seat Securing on the Comfort and Cheetah2 modelsPlease note Make sure you check all belt buckles are tight Securing on the Cabriolet, CX2 and Cougar2 models Page Lateral positioning View from inside with seat lifted for clarity Finally pull all fastening straps tightCentre-positioning Securing the safety belts Fitting to Single Seater Chariot Trailers Fitting the D-ringsSecuring on the Cheetah1 model Page Securing on the CX1 and Cougar1 models Fully fitted baby seat Event of an accidentPage Fully fitted baby seat Event of an accident Fastening the Baby and Adjusting the Safety Belts On the Cheetah1, Cheetah2 and Comfort modelsSafety Instructions Care of the Baby SeatFolding the Chariot Carriers