The next step is to connect the safety belts in the trailer with the baby seat:
Insert the trailer seat crotch harness from the rear through the slot in the baby seat in front of the flap for the padding.
Then insert the fastnex insert through the elastic loop at the end of the flap for the padding.
Loosen the fastex buckles on the padded shoulder harness on the backrest of the trailer seat and take it off.
Insert the fastex buckles from the front through the lower or upper slots in the baby seat, depending on the size of the child,…
...and reconnect both buckles behind the seat. The two fastex buckles on the backrest should be in the lowest position.
The shoulder harness and crotch straps can now be connected by closing the fastex fastener on the front of the baby seat.
The shoulder padding can be turned over at the top so that the shoulder strap can be sufficiently shortened.
If necessary, the lower con- necting strap of the shoulder padding can also be unstrapped and the shoulder padding turned over there as well.
For all other children, the shoulder strap can be drawn through the upper flaps of the padding to prevent the padding being able to slip to the side.
55