Graco ISPC094CB owner manual Adjusting Handle, Removing and Attaching Infant Restraint

4.1 Adjusting Handle
1. Press handle adjustment buttons on both
sides of handle ➊.
2. Rotate handle until it clicks into any of the
4 positions:
Position A: MUST be used
when carrying by handle,
Position B,C: are convenience	Carrying
positions,		B
Position D: is the sitting position,	A
NEVER use position B in
the vehicle.
BOTH handle adjustment
buttons must pop out to lock
handle in place ➋.
3. Push and pull on the handle to
be sure it is locked firmly in		D
position.
4.2 Removing and Attaching Infant Restraint
To remove, squeeze release handle at back of
infant restraint and lift out of base as shown	➌.
To put infant restraint in base, push infant
restraint down until it clicks into base. Pull up
on infant restraint to be sure it is latched
firmly into base.

➊

➋

C

Sitting

➌

16