Kodak C800 manual Attaching the Strap, Control-button activator, Insert the shorter looped end

3.Press the SELECT BUTTON (40) to

activate the “blinking digits” of the selected date or time format.

4.Move the ZOOM-DIAL LEVER (1) to the right or left to increase or decrease the number or press the select button again to increase the number.

5.Press the ENTER BUTTON (39) to store the information and to activate the next “blinking digits” (follow steps 4 through 5 to complete your selection or press the enter button again to end the session).

•After you set the date or time, the LCD panel displays “DATE IS” or “TIME IS” followed by the selected date or time.

ATTACHING THE STRAP

1.Insert the shorter looped end of the

strap behind the STRAP POST (10).

2. Thread the longer end of the strap through the shorter loop.

3. Pull the strap tight.

Control-button activator

Use the knob on the clasp of the camera strap to activate the smaller-sized control buttons on the camera.

8