Kodak C800 manual PRINT-QUANTITY Select, Canceling print-quantity select

PRINT-QUANTITY SELECT

This feature lets you choose before you take the picture the number of prints from 0 to 9 you will receive from the photofinishing lab. This service is dependent on the photofinishers capability.

1.Open the CONTROL-PANEL COVER (18)

located below the LCD PANEL (15).

2.Press the PRINT-QUANTITY

BUTTON (42) once with the control- button activator on camera strap.

• The LCD panel displays

“PRINT QUANTITY” and “ P1.”

3.Press repeatedly the print-quantity button to select the number of prints you want.

TITLE PRINT DATE SELECT ENTER

•You can view the numbers “ P1,”

“P2,” etc., in the FRAME COUNTER (24) area on the LCD panel.

4.Press the ENTER BUTTON (39) to

complete your selection.

•After you take the picture, the print quantity defaults to 1.

Canceling print-quantity select

You can cancel the selected print quantity after you take the picture and before you take the next picture.

1.Press and hold the PRINT-QUANTITY

BUTTON (42).

2.Release the button when the motor stops running.

•The film will rewind one frame to rewrite the data.

3.See PRINT-QUANTITY SELECT, steps 2 through 4, to select a different quantity or bypass steps 2 through 4 if the default is to resume at P1.

27