Ricoh FV-G200B1 manual Table of Contents

Table of Contents

1. Connector Specifications		3
1.1	RJ45 Connector	3
1.2	DC Iris Lens Connector	4
1.3	Power-I/O Connector	4
1.3.1 Equivalent Circuit for the Input Pin of the I/O Connector		6

2. Camera Output Timing Charts			........................................................................................................................................ 7
2.1	Horizontal Timing		7
2.2	Vertical Timing		7
2.2.1		Full Scanning	7
2.2.2		1/2 Partial Scanning	8
2.2.3		1/4 Partial Scanning	8
2.2.4 AOI (Area of Interest)			9
2.3	Pixel Transferring Image		10

3. Camera Opeartional Modes		11
3.1	Normal Mode	11
3.2	Pulse Width Trigger Mode	11
3.2.1 Timing		11
3.2.2 Exposure Timing with the Positive Polarity Trigger Signal		12
3.2.3 Exposure Timing with the Negative Polarity Trigger Signal		12
3.3	Edge Preset Trigger Mode	13
3.3.1 Timing		13
3.3.2 Exposure Timing with the Positive Polarity Trigger Signal		14
3.3.3 Exposure Timing with the Negative Polarity Trigger Signal		14
3.4	Edge Preset Trigger Mode (Trigger input while the image is out)	15
3.4.1 Timing		15
3.4.2 Exposure Timing with the Positive Polarity Trigger Signal		16
3.4.3 Exposure Timing with the Negative Polarity Trigger Signal		16
3.5	H reset mode	17

4. Communication Protocol		18
4.1	Communication Method	18
4.2	Communication Settings	18
4.3	Communication Format	18
4.4	Camera Control Command	21
4.4.1 Camera Command List (Device Code: 000000)		21
4.4.2 Camera Command List (Device Code: 100000)		23
4.4.3 Descriptions of the Camera Control Commands (Device code: 000000);		25
4.4.4 Descriptions of the Camera Commands (Device code: 100000);		31
4.5	GenICam Command / Camera Command Reference Table	35

FV-G200B1	2/38
User’s Guide Rev. 1.02