Ricoh FV-G200B1 manual 37/38

Page 37

Caution:

Width, Height and PixelFormat all affect the image data size.

Please use command name defined by GenICam when changing these values, as exampled in the following sample code.

In the case to change the Width

BOOL SetWidth( PvDevice *pDevice, PvInt64 lValue )

{

PvGenInteger* lGenInteger = dynamic_cast<PvGenInteger*>( pDevice->GetGenParameters()->Get( "Width" ) ); PvResult lResult = lGenInteger->SetValue(lValue);

return lResult.IsOK();

}

	FV-G200B1	37/38
	User’s Guide Rev. 1.02	37/38
	User’s Guide Rev. 1.02

Image 37

Contents FV-G200B1 User’s Guide Rev GigE Vision VGA Monochrome CCD Camera FV-G200B1Table of Contents RJ45 Connector Connector SpecificationsPower-I/O Connector DC Iris Lens ConnectorFV-G200B1 User’s Guide Rev Or equivalent connector Equivalent Circuit for the Input Pin of the I/O ConnectorVertical Timing Full Scanning Horizontal Timing3 1/4 Partial Scanning 2 1/2 Partial ScanningFval Lval SUB AOI Area of InterestPixel Transferring Image Pulse Width Trigger Mode Normal ModeTiming Input Trigger signal Exposure Timing with the Positive Polarity Trigger SignalTrigger signal Trigger signal With Photocoupler delayEdge Preset Trigger Mode 14/38 15/38 16/38 Reset mode Communication Method Communication SettingsCommunication Format Name Descriptions 【Example Code】Reading the data from the command 00H Camera Command List Device Code Camera Control Command22/38 23/38 24/38 Underline settings are the factory default settings Descriptions of the Camera Control Commands Device code26/38 27/38 28/38 29/38 30/38 AGC Descriptions of the Camera Commands Device code32/38 33/38 34/38 GenICam command Device Command Function GenICam Command / Camera Command Reference Table2EH 37/38 38/38