Ricoh FV-G200B1 manual 28/38

Command No.							Command Description
		[White clip level for the white clip test pattern]
3EH: WHITE_CLIP[15..8]	Initial data: WHITE_CLIP[15..0] = 4,095; data range: 0 to 4,095
3FH: WHITE_CLIP[7..0]
		Sets the white clip level of the white clip test pattern.
		[Delay time (us) for the trigger signal]
50H: DELAY_I[7..0]		Initial data: DELAY_I[23..0] = 0, DELAY_F[7..0] = 0, data range: 0 to 2,000,000
51H: DELAY_I[15..8]		Sets the delay time that is from the trigger signal input to the start of the exposure as useconds.
52H: DELAY_I[23..16]
53H: DELAY_F[7..0]		Delay time for the trigger signal = (DELAY_I[23..0]). (DELAY_F[7..0]) useconds
		[Delay time (us) for the strobe signal]
54H:		Initial data: STROBEDELAY _I[23..0] = 0, STROBEDELAY _F[7..0] = 0, data range: 0 to 2,000,000
STROBEDELAY_I[7..0]
55H:		Delay time for the strobe signal = (STROBEDELAY _I[23..0]). (STROBEDELAY _F[7..0]) useconds
STROBEDELAY_I[15..8]
56H:
STROBEDELAY_I[23..16]
57H:
STROBEDELAY_F[7..0]
		[Frame rate (Hz)]
58H: FPS_I[7..0]		Initial data: FPS_I[15..0] = 15, data rage: 0 to 61
59H: FPS_I[15..8]		Initial data: FPS_F[15..0] = 0.31668, data range: 0 to 0.99999
5AH: FPS_F[7..0]		Sets the frame rate as Hz
5BH: FPS_F[15..8]
5CH: FPS_F[23..16]		Frame rate = (FPS_I[15..0]). (FPS_F[23..0]) Hz
		data range of frame rate:						0.29261 to 61.26673 Hz
		Maximum frame rate for full resolution: 15.31668 Hz (as initial data)
		Note 1: The maximum frame rate depends on the AOI setting
		Note 2: The maximum frame rate is achieved when the vertical resolution is set 1/4 of the full resolution.
			The maximum frame rate does not increase even if the vertical resolution is set smaller than 1/4
			of the full resolution.
		[I/O signal polarity] Initial data: IOSIGNAL_POL[7..0] = 00H,
5DH:		Sets the No.2 pin and No.3 pin of the I/O signal polarity.
IOSIGNAL_POL[7..0]		D[7..0]
		D7	D6	D5	D4	D3	D2	D1		D0
		D7 to D2:		No Function					Always set as “000000”
		D1		No.3 pin (I/O-2)			polarity		0: Non-invert		1: Invert
		D0:		No.2 pin (I/O-1)			polarity		0: Non-invert		1: Invert

FV-G200B1	28/38
User’s Guide Rev. 1.02