Sanyo VCC-WB2000 instruction manual Motion Detector SET Settings, Picture Quality, Time

Page 38

Alarm Setting

8PRIORITY setting

This sets the image quality for alarm recording.

•PICTURE QUALITY

Alarm images are recorded at high quality.

•TIME

Alarm images are recorded at normal quality.

*The time used for recording alarm images becomes interval shorter.

MOTION DETECTOR SET Settings

1 Click the [ALARM] button in the main menu.

The ALARM SET screen will be displayed.

2 Set MOTION DETECTOR to “ ON” .

The MOTION DETECTOR SET screen will be displayed.

9ALARM RESOLUTION setting

This sets the resolution that is to be used for recording alarm images.

The default setting is “720x240”.

FOVERWRITE setting

If this is set to “ON” while a memory card is inserted, old alarm data is erased and new data is recorded over the top.

3 While looking at the screen, move the pointer to the motion sensor detection area and click with the left mouse button.

A sensor mark ( ) will appear in the detection area (grid)˙.

Set other sensor marks in the detection area in the same way.

Note: If you click on a sensor mark that has been set, it will be cleared.

4 Click the [SET] button.

English

– 37 –

Image 38

Contents VCC-WB2000 Network CameraContents Safety Guard Information to userPrecautions Operating environment FeaturesAccessories Name and Function of Each Part Monitor OUT connectorPower indicator Lens mount capName and Function of Each Part For C mount type Attaching the LensAttach the CS mount-type lens Flange Back Adjustment Turn on the camera’s powerConnections Basic ConnectionsConnections Inserting the wireless LAN cardRemoving the wireless LAN card PPP Dial-up Connections Network Camera Settings Network Camera Settings Installation of Plug-in SoftwareClick the Finish button Click the Install buttonUninstalling the plug-in software Camera uses cookies Browser SettingsCookie Settings Computer and Camera Settings Sanyo Network CAMERA, the Unit is Network Connection SettingsClosing the initial window Click the Network button in the main menuAccess level Network SET SettingsSet the password UsernameNetwork Speed Http Port NumberWireless LAN SET Settings Current ChannelWEP Encipherment Encryption KEYPPP SET Settings Type in the commands to use for controlling the modemBaud Rate AuthenticationCircuit Type Data SizeMenu Screen and Main Menu AUTO/FINE radio buttonsMenu Screen and Main Menu CAMERA, the Unit is DisconnectedViewing Camera Images Opening and Closing the Initial ScreenSelect the language and then click the SET button When you have finished, click the network disconnect buttonViewing Camera Images Click the Live View button in the main menu Live View SettingsClock Unset indicator Lit green NetcamLive View Settings Resolution ExpansionSaving Images into a Computer Back button View Frame OperationsClick the View Frame button in the main menu Camera Title Camera SettingsLive Image IrisElectronic Shutter Camera SettingsBright White BalanceClick the SET button Setting the camera titleType in the new camera title e.g. CAM1 Click the Alarm button in the main menu Alarm SettingExternal Alarm Sensor Settings Change the External Alarm setting to NC or noAlarm Setting Time Motion Detector SET SettingsPicture Quality Inserting the memory card Alarm Data Recording CapacityExpansion memory cards Removing the memory cardClick the Alarm Data indicator while it is red or green Recording Alarm DataPlaying Back Alarm Data Buffer Data View screen Click the Delete button Deleting Alarm ImagesPlaying Back Expansion Memory Card Images Pre-alarm and Post-alarm Recording Clock SET Clock SET SettingsDaylight Saving Mode TimezoneFirmware Version RS-232C Settings RS-232C SETStatus Checking SUB-MICROCOMPUTER VersionIf the camera cannot be connected TroubleshootingIs the link indicator flashing? If you forget the IP AddressSpecifications 136 mm 85 mm 126 mm 57 mm 12 mm 51 mm SpecificationsDimensions Exclusions Page Page Printed on recycled paper 1AC6P1P2545 L5AB2/US 0702KP-CZ