Sanyo VCC-WB2000 instruction manual Network Connection Settings, Closing the initial window

3Network Connection Settings

1Select the desired language (e.g. English) in the language selection window, and then click the [SET] button.

The main menu window will be displayed. Available languages: English, French, German, Spanish

(Closing the initial window)

To change the language or stop tasks such as live image monitoring, click the network disconnect button.

“SANYO NETWORK CAMERA, THE UNIT IS

DISCONNECTED” will be displayed, and the camera will be disconnected from the network. To reconnect the camera to the network, click the [Refresh] button in the title bar.

Note:

•If you close the web browser without clicking the network disconnect button, the message “THE UNIT IS BUSY!” may be displayed the next time you try to access the camera.

Always be sure to use the network disconnect button to close communication with the camera.

•If a problem with the web browser occurs which causes the web browser to close abnormally without using the network disconnect button, wait three minutes or more, and then re-access the camera.

2 Click the [NETWORK] button in the main menu.

Note: When making the network connection settings, always make sure that you change the network settings first. After making these settings, you can then change the wireless LAN or PPP settings as required.