Sanyo VCC-WB2000 instruction manual Basic Connections

Page 10

Connections

Turn off the power for all equipment before making any connections.

Basic Connections

1 Connect the camera to a computer.

Connect a cable between the ETHERNET connectors of the camera and the computer.

Use a crossed wire-type Ethernet cable.

2 Connect the power supply.

When using this unit, the supplied clamping core A must be installed on the power cord, in order to prevent electromagnetic interference to the other devices connected.

•

•

If using a commercially-available 24 V AC adapter, always be sure to connect the ground wire (18AWG or higher) to the ground terminal. (Figure 1)

If using a 12 V DC power supply, make the connections as shown in Figure 2.

Note:

•

•

In order to avoid any problems with the camera and the power supply, take sufficient care to ensure that the polarities are correct when connecting the power supply.

When the accessory ferrite cores are attached, they will increase the load on the cable, so after doing the installation, adjust the cable accordingly.

3 Insert the power cord plug into a wall outlet.

The POWER indicator (A) will illuminate.

Computer

					PC CARD
	MONITOR	ETHERNET			RS-232C
	OUT	ETHERNET			RS-232C
	OUT
	(A)			AC24V	GND
	PC
	POWER 1 2
	MODEM			DC12V
	ALARM IN		OUT	DC12V
	ALARM IN		OUT	CLASS 2 WIRING
				CLASS 2 WIRING

A

Ethernet cable

(crossed wire-type cable)

24 V AC connection		12 V DC connection
AC24V	GND	AC24V	GND
DC12V		DC12V
Figure 1		Figure 2

English

– 9 –

Image 10

Contents VCC-WB2000 Network CameraContents Safety Guard Information to userPrecautions Accessories FeaturesOperating environment Name and Function of Each Part Monitor OUT connectorPower indicator Lens mount capName and Function of Each Part Attach the CS mount-type lens Attaching the LensFor C mount type Flange Back Adjustment Turn on the camera’s powerConnections Basic ConnectionsRemoving the wireless LAN card Inserting the wireless LAN cardConnections PPP Dial-up Connections Network Camera Settings Network Camera Settings Installation of Plug-in SoftwareUninstalling the plug-in software Click the Install buttonClick the Finish button Cookie Settings Browser SettingsCamera uses cookies Computer and Camera Settings Sanyo Network CAMERA, the Unit is Network Connection SettingsClosing the initial window Click the Network button in the main menuAccess level Network SET SettingsSet the password UsernameNetwork Speed Http Port NumberWireless LAN SET Settings Current ChannelWEP Encipherment Encryption KEYPPP SET Settings Type in the commands to use for controlling the modemBaud Rate AuthenticationCircuit Type Data SizeMenu Screen and Main Menu AUTO/FINE radio buttonsMenu Screen and Main Menu CAMERA, the Unit is DisconnectedViewing Camera Images Opening and Closing the Initial ScreenViewing Camera Images When you have finished, click the network disconnect buttonSelect the language and then click the SET button Click the Live View button in the main menu Live View SettingsClock Unset indicator Lit green NetcamLive View Settings Resolution ExpansionSaving Images into a Computer Click the View Frame button in the main menu View Frame OperationsBack button Camera Title Camera SettingsLive Image IrisElectronic Shutter Camera SettingsBright White BalanceType in the new camera title e.g. CAM1 Setting the camera titleClick the SET button Click the Alarm button in the main menu Alarm SettingExternal Alarm Sensor Settings Change the External Alarm setting to NC or noAlarm Setting Picture Quality Motion Detector SET SettingsTime Inserting the memory card Alarm Data Recording CapacityExpansion memory cards Removing the memory cardPlaying Back Alarm Data Recording Alarm DataClick the Alarm Data indicator while it is red or green Buffer Data View screen Playing Back Expansion Memory Card Images Deleting Alarm ImagesClick the Delete button Pre-alarm and Post-alarm Recording Clock SET Clock SET SettingsDaylight Saving Mode TimezoneFirmware Version RS-232C Settings RS-232C SETStatus Checking SUB-MICROCOMPUTER VersionIf the camera cannot be connected TroubleshootingIs the link indicator flashing? If you forget the IP AddressSpecifications Dimensions Specifications136 mm 85 mm 126 mm 57 mm 12 mm 51 mm Exclusions Page Page Printed on recycled paper 1AC6P1P2545 L5AB2/US 0702KP-CZ