Sanyo VCC-WB2000 instruction manual Precautions

Page 4

Precautions

In case of problem

Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre).

Do not open or modify

Do not open the cabinet, as it may be dangerous and cause damage to the unit. For internal settings and repairs, consult your dealer (or a Sanyo Authorized Service Centre).

Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside the camera. If used with a foreign object inside, it could cause a fire, short-circuits or damages.

If water or a liquid gets inside the camera, disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre). Be careful to protect the camera from rain, sea water, etc.

Be careful when handling the unit

To prevent damages, do not drop the camera or subject it to strong shock or vibration.

Install away from electric or magnetic fields

If installed close to a TV, radio transmitter, magnet, electric motor, transformer, audio speakers the magnetic field they generate will distort the image.

Protect from humidity and dust

To prevent damages to the camera, do not install it where there is greasy smoke or steam, where the dampness may get too high, or where there is a lot of dust.

Protect from high temperatures

Do not install close to stoves, or other heat generating devices, such as spotlights, etc., or where it could be subject to direct sunlight, as that could cause deformation, discoloration or other damages.

Be careful when installing close to the ceiling, in a kitchen or boiler room, as the temperature may raise to high levels.

Install where the temperature range will stay between –10°C and 50°C. (no condensation)

Cleaning

Dirt can be removed from the cabinet by wiping it with a soft cloth. To remove stains, wipe with a soft cloth moistened with a soft detergent solution and wrung dry, then wipe dry with dry soft cloth.

Do not use benzine, thinner or other chemical product on the cabinet, as that may cause deformation and paint peeling. Before using a chemical cloth, make sure to read all accompanying instructions. Make sure that no plastic or rubber material comes in contact with the cabinet for a long period of time, as that may cause damage or paint peeling.

English

– 3 –

Image 4
Contents VCC-WB2000 Network CameraContents Safety Guard Information to userPrecautions Accessories FeaturesOperating environment Monitor OUT connector Power indicatorName and Function of Each Part Lens mount capName and Function of Each Part Attach the CS mount-type lens Attaching the LensFor C mount type Flange Back Adjustment Turn on the camera’s powerConnections Basic ConnectionsRemoving the wireless LAN card Inserting the wireless LAN cardConnections PPP Dial-up Connections Network Camera Settings Network Camera Settings Installation of Plug-in SoftwareUninstalling the plug-in software Click the Install buttonClick the Finish button Cookie Settings Browser SettingsCamera uses cookies Computer and Camera Settings Network Connection Settings Closing the initial windowSanyo Network CAMERA, the Unit is Click the Network button in the main menuNetwork SET Settings Set the passwordAccess level UsernameNetwork Speed Http Port NumberWireless LAN SET Settings Current ChannelWEP Encipherment Encryption KEYPPP SET Settings Type in the commands to use for controlling the modemAuthentication Circuit TypeBaud Rate Data SizeMenu Screen and Main Menu AUTO/FINE radio buttonsMenu Screen and Main Menu CAMERA, the Unit is DisconnectedViewing Camera Images Opening and Closing the Initial ScreenViewing Camera Images When you have finished, click the network disconnect buttonSelect the language and then click the SET button Live View Settings Clock Unset indicatorClick the Live View button in the main menu Lit green NetcamLive View Settings Resolution ExpansionSaving Images into a Computer Click the View Frame button in the main menu View Frame OperationsBack button Camera Settings Live ImageCamera Title IrisCamera Settings BrightElectronic Shutter White BalanceType in the new camera title e.g. CAM1 Setting the camera titleClick the SET button Alarm Setting External Alarm Sensor SettingsClick the Alarm button in the main menu Change the External Alarm setting to NC or noAlarm Setting Picture Quality Motion Detector SET SettingsTime Alarm Data Recording Capacity Expansion memory cardsInserting the memory card Removing the memory cardPlaying Back Alarm Data Recording Alarm DataClick the Alarm Data indicator while it is red or green Buffer Data View screen Playing Back Expansion Memory Card Images Deleting Alarm ImagesClick the Delete button Pre-alarm and Post-alarm Recording Clock SET Settings Daylight Saving ModeClock SET TimezoneRS-232C Settings RS-232C SET Status CheckingFirmware Version SUB-MICROCOMPUTER VersionTroubleshooting Is the link indicator flashing?If the camera cannot be connected If you forget the IP AddressSpecifications Dimensions Specifications136 mm 85 mm 126 mm 57 mm 12 mm 51 mm Exclusions Page Page Printed on recycled paper 1AC6P1P2545 L5AB2/US 0702KP-CZ