Sanyo VCC-WB2000 RS-232C Settings RS-232C SET, Status Checking, Firmware Version

Page 45

RS-232C Settings (RS-232C SET)

ID3

This sets the communication speed for the RS-232C connector of the camera when the camera is connected to a computer for maintenance and servicing.

Click the [RS-232C] button in the main menu.

The RS-232C SET screen will be displayed. Select the communication speed from the drop-down list box, and then click the [SET]

button. The setting will then be saved.

•The default setting for the communication speed is 19200 bps.

Note: If you click the [LIVE VIEW] button, the display will return to the live image screen.

STATUS Checking

This displays information about the camera status.

Click the [STATUS] button in the main menu.

The ALARM DATA LIST screen will be displayed.

ID3

Note: If you click the [LIVE VIEW] button, the display will return to the live image screen.

12

3

1FIRMWARE VERSION

This shows the version number for the camera’s firmware.

2SUB-MICROCOMPUTER VERSION

This shows the version number for the camera’s sub-microcomputer.

3PCMCIA: SOCKET STATUS

This shows the usage status for the PC card slot.

– 44 –

English

Image 45

Contents Network Camera VCC-WB2000Contents Information to user Safety GuardPrecautions Features AccessoriesOperating environment Power indicator Monitor OUT connectorName and Function of Each Part Lens mount capName and Function of Each Part Attaching the Lens Attach the CS mount-type lensFor C mount type Turn on the camera’s power Flange Back AdjustmentBasic Connections ConnectionsInserting the wireless LAN card Removing the wireless LAN cardConnections PPP Dial-up Connections Network Camera Settings Installation of Plug-in Software Network Camera SettingsClick the Install button Uninstalling the plug-in softwareClick the Finish button Browser Settings Cookie SettingsCamera uses cookies Computer and Camera Settings Closing the initial window Network Connection SettingsSanyo Network CAMERA, the Unit is Click the Network button in the main menuSet the password Network SET SettingsAccess level UsernameHttp Port Number Network SpeedCurrent Channel Wireless LAN SET SettingsEncryption KEY WEP EnciphermentType in the commands to use for controlling the modem PPP SET SettingsCircuit Type AuthenticationBaud Rate Data SizeAUTO/FINE radio buttons Menu Screen and Main MenuCAMERA, the Unit is Disconnected Menu Screen and Main MenuOpening and Closing the Initial Screen Viewing Camera ImagesWhen you have finished, click the network disconnect button Viewing Camera ImagesSelect the language and then click the SET button Clock Unset indicator Live View SettingsClick the Live View button in the main menu Lit green NetcamResolution Expansion Live View SettingsSaving Images into a Computer View Frame Operations Click the View Frame button in the main menuBack button Live Image Camera SettingsCamera Title IrisBright Camera SettingsElectronic Shutter White BalanceSetting the camera title Type in the new camera title e.g. CAM1Click the SET button External Alarm Sensor Settings Alarm SettingClick the Alarm button in the main menu Change the External Alarm setting to NC or noAlarm Setting Motion Detector SET Settings Picture QualityTime Expansion memory cards Alarm Data Recording CapacityInserting the memory card Removing the memory cardRecording Alarm Data Playing Back Alarm DataClick the Alarm Data indicator while it is red or green Buffer Data View screen Deleting Alarm Images Playing Back Expansion Memory Card ImagesClick the Delete button Pre-alarm and Post-alarm Recording Daylight Saving Mode Clock SET SettingsClock SET TimezoneStatus Checking RS-232C Settings RS-232C SETFirmware Version SUB-MICROCOMPUTER VersionIs the link indicator flashing? TroubleshootingIf the camera cannot be connected If you forget the IP AddressSpecifications Specifications Dimensions136 mm 85 mm 126 mm 57 mm 12 mm 51 mm Exclusions Page Page Printed on recycled paper 1AC6P1P2545 L5AB2/US 0702KP-CZ