Network Camera Settings
C PPP SET Settings
These settings are used in order to connect the camera to the Internet via a modem.
Note: When using modem connections, you cannot access the camera using a computer’s web
browser. You should normally connect the camera to a wired LAN or wireless LAN.
Must be entered
1
2
Must be entered
3
4
5
6
8 7
1 Install the Network Archiving software (sold separately) to the computer.
Refer to the documentation provided with the Network Archiving software for further details.
2 Set pin 1 of the PC/MODEM select switch at the rear of the camera to the “ MODEM” setting.
3 Click the [PPP] button in the main menu.
The initial PPP SET window will be displayed.
4 Select “ USE” from the [PPP USE]
5 Type in the telephone number, login ID and password for the access point to connect to.
•PROVIDER TEL. NO.
•LOGIN ID
•PASSWORD
6 Type in the commands to use for controlling the modem.
Type in the commands starting with “AT” that are specified by the modem manufacturer in the [MODEM INITIALIZE COMMAND] box, and also type in the command to change the flow control setting to software flow control in the same box.
Change any other settings as required using the
7 Once you have finished changing the settings, click the [SET] button.
– 22 – | English |