Sanyo VCC-WB2000 Camera Settings, Bright, Electronic Shutter, White Balance, Gamma

Page 34

CAMERA Settings

5BRIGHT

This lets you set the image brightness to one of five settings.

Setting range: 1 to 5 (Default: 3)

Note: The larger the setting, the brighter are the images.

6ELECTRONIC SHUTTER

This setting is used when IRIS is set to “AI”.

Setting range: 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000

7BLC (backlight compensation)

Available settings:

•OFF: Backlight compensation is not carried out.

•MULTI (multiple point photometry): Backlight compensation is calculated from the whole image to obtain correct images.

•CENTER (center focus photometry): Backlight compensation is calculated based on the center of the image to obtain correct images.

8WHITE BALANCE

Available settings:

•AUTO (automatic white balance): The white balance is adjusted automatically to obtain correct colors even if the light source changes.

•INDOOR: This setting is for when the camera is being used indoors under fluorescent lighting.

•OUTDOOR: This setting is for when the camera is being used outdoors under natural sunlight.

•MANUAL (manual white balance): This lets you make manual fine adjustments to the white balance. It can be used when the “AUTO” setting does not give correct color reproduction.

☞Setting manual white balance (MANUAL)

Click the and buttons repeatedly to adjust the settings for R (red) and B (blue).

Setting range: 0 to 255

Note: The red or blue component becomes stronger when the setting is higher.

9AGC Gain

If the images are too dark, change the maximum [AGC Gain] value to make the images lighter.

The default setting is “0”.

Available settings:

OFF: AGC is not used.

–6 dB, 0, +6 dB, +9dB

FGAMMA

Select a value that is suitable for the monitor being used.

Setting range: 1, 0.8, 0.6, 0.45, 0.3

G[PRESET] button

Click this button to return all settings to their factory defaults. The preset confirmation dialog box will be displayed. Click the [OK] button to return the values to their factory defaults.

English

– 33 –

Image 34

Contents VCC-WB2000 Network CameraContents Safety Guard Information to userPrecautions Accessories FeaturesOperating environment Name and Function of Each Part Monitor OUT connectorPower indicator Lens mount capName and Function of Each Part Attach the CS mount-type lens Attaching the LensFor C mount type Flange Back Adjustment Turn on the camera’s powerConnections Basic ConnectionsRemoving the wireless LAN card Inserting the wireless LAN cardConnections PPP Dial-up Connections Network Camera Settings Network Camera Settings Installation of Plug-in SoftwareUninstalling the plug-in software Click the Install buttonClick the Finish button Cookie Settings Browser SettingsCamera uses cookies Computer and Camera Settings Sanyo Network CAMERA, the Unit is Network Connection SettingsClosing the initial window Click the Network button in the main menuAccess level Network SET SettingsSet the password UsernameNetwork Speed Http Port NumberWireless LAN SET Settings Current ChannelWEP Encipherment Encryption KEYPPP SET Settings Type in the commands to use for controlling the modemBaud Rate AuthenticationCircuit Type Data SizeMenu Screen and Main Menu AUTO/FINE radio buttonsMenu Screen and Main Menu CAMERA, the Unit is DisconnectedViewing Camera Images Opening and Closing the Initial ScreenViewing Camera Images When you have finished, click the network disconnect buttonSelect the language and then click the SET button Click the Live View button in the main menu Live View SettingsClock Unset indicator Lit green NetcamLive View Settings Resolution ExpansionSaving Images into a Computer Click the View Frame button in the main menu View Frame OperationsBack button Camera Title Camera SettingsLive Image IrisElectronic Shutter Camera SettingsBright White BalanceType in the new camera title e.g. CAM1 Setting the camera titleClick the SET button Click the Alarm button in the main menu Alarm SettingExternal Alarm Sensor Settings Change the External Alarm setting to NC or noAlarm Setting Picture Quality Motion Detector SET SettingsTime Inserting the memory card Alarm Data Recording CapacityExpansion memory cards Removing the memory cardPlaying Back Alarm Data Recording Alarm DataClick the Alarm Data indicator while it is red or green Buffer Data View screen Playing Back Expansion Memory Card Images Deleting Alarm ImagesClick the Delete button Pre-alarm and Post-alarm Recording Clock SET Clock SET SettingsDaylight Saving Mode TimezoneFirmware Version RS-232C Settings RS-232C SETStatus Checking SUB-MICROCOMPUTER VersionIf the camera cannot be connected TroubleshootingIs the link indicator flashing? If you forget the IP AddressSpecifications Dimensions Specifications136 mm 85 mm 126 mm 57 mm 12 mm 51 mm Exclusions Page Page Printed on recycled paper 1AC6P1P2545 L5AB2/US 0702KP-CZ