Sanyo VCC-WB2000 instruction manual Saving Images into a Computer

Page 31

LIVE VIEW Settings

EIMAGE MODE setting

This lets you set whether live images are displayed in color or black and white. The default setting is color mode (COLOR). To change the mode to black and white, select “GRAY”.

If you select “GRAY”, the amount of data transmitted will be reduced, so that the transmission speed can be increased.

Note: If pre-alarm recording has been set, the compression ratio and resolution cannot be set.

3[SET] button

This button is used to accept the settings in the drop-down list boxes.

4Camera title display

Click on the [CAMERA] button in the main menu and type in the title for the camera in the “CAMERA TITLE” field. This setting will be used as the camera title in displays. (p. 32)

This same camera title is displayed as part of the “ALARM” and “ALARM DATA” indicator displays.

5Live image screen display

The images from the camera are displayed here according to the settings for the transmission of live images. (p. 28)

Saving Images into a Computer

The camera images that are being monitored can be saved a still images in the computer’s storage area in JPEG2000 format.

1 When the image to be saved is being displayed in the live image screen, right-click the camera image.

The image will be displayed as a still image and the image save pop-up menu will be displayed. Click on this pop-up menu to display the image save dialog box.

2 Type in the filename and click the [Save] button.

The image will be saved into the computer.

Note:

•When saving images into a computer, the images will be saved at the selected resolution.

•The extension used for the saved images will be “.jp2”.

– 30 –

English

Image 31

Contents Network Camera VCC-WB2000Contents Information to user Safety GuardPrecautions Accessories FeaturesOperating environment Lens mount cap Monitor OUT connectorPower indicator Name and Function of Each PartName and Function of Each Part Attach the CS mount-type lens Attaching the LensFor C mount type Turn on the camera’s power Flange Back AdjustmentBasic Connections ConnectionsRemoving the wireless LAN card Inserting the wireless LAN cardConnections PPP Dial-up Connections Network Camera Settings Installation of Plug-in Software Network Camera SettingsUninstalling the plug-in software Click the Install buttonClick the Finish button Cookie Settings Browser SettingsCamera uses cookies Computer and Camera Settings Click the Network button in the main menu Network Connection SettingsClosing the initial window Sanyo Network CAMERA, the Unit isUsername Network SET SettingsSet the password Access levelHttp Port Number Network SpeedCurrent Channel Wireless LAN SET SettingsEncryption KEY WEP EnciphermentType in the commands to use for controlling the modem PPP SET SettingsData Size AuthenticationCircuit Type Baud RateAUTO/FINE radio buttons Menu Screen and Main MenuCAMERA, the Unit is Disconnected Menu Screen and Main MenuOpening and Closing the Initial Screen Viewing Camera ImagesViewing Camera Images When you have finished, click the network disconnect buttonSelect the language and then click the SET button Lit green Netcam Live View SettingsClock Unset indicator Click the Live View button in the main menuResolution Expansion Live View SettingsSaving Images into a Computer Click the View Frame button in the main menu View Frame OperationsBack button Iris Camera SettingsLive Image Camera TitleWhite Balance Camera SettingsBright Electronic ShutterType in the new camera title e.g. CAM1 Setting the camera titleClick the SET button Change the External Alarm setting to NC or no Alarm SettingExternal Alarm Sensor Settings Click the Alarm button in the main menuAlarm Setting Picture Quality Motion Detector SET SettingsTime Removing the memory card Alarm Data Recording CapacityExpansion memory cards Inserting the memory cardPlaying Back Alarm Data Recording Alarm DataClick the Alarm Data indicator while it is red or green Buffer Data View screen Playing Back Expansion Memory Card Images Deleting Alarm ImagesClick the Delete button Pre-alarm and Post-alarm Recording Timezone Clock SET SettingsDaylight Saving Mode Clock SETSUB-MICROCOMPUTER Version RS-232C Settings RS-232C SETStatus Checking Firmware VersionIf you forget the IP Address TroubleshootingIs the link indicator flashing? If the camera cannot be connectedSpecifications Dimensions Specifications136 mm 85 mm 126 mm 57 mm 12 mm 51 mm Exclusions Page Page Printed on recycled paper 1AC6P1P2545 L5AB2/US 0702KP-CZ