Sanyo VCC-WB2000 Authentication, Circuit Type, Baud Rate, Data Size, Parity, Stop BIT

Page 24

Network Camera Settings

1AUTHENTICATION

This sets the verification protocol to be use when connecting to the access point. Set this to the protocol specified by the Internet Service Provider. It should normally be set to “AUTO”.

Available settings:

•AUTO: PAP or CHAP is chosen automatically as required

•PAP: Only PAP verification is used.

•CHAP: Only CHAP verification is used.

2CIRCUIT TYPE

This sets the type of telephone circuit that the modem is connecting to.

Available settings:

•TONE: For tone dialing circuits

•PULSE: For pulse dialing circuits

Note: Set to “TONE” if using a terminal adapter.

3BAUD RATE

This sets the communication speed for the modem.

Available settings: 115200, 38400 (bps)

4DATA SIZE

Available settings: 8, 7 (bits)

5PARITY

This sets the parity.

Available settings:

•NONE: No parity

•EVEN: Even parity

•ODD: Odd parity

6STOP BIT

Available settings: 1, 1.5, 2

7AUTO IP ADDRESS display

This shows the IP address for the camera.

Note: This is only displayed while the camera is connected.

8ERROR INFO. display

This shows error information relating to the previous PPP connection.

Display details:

•Modem timeout or Not connected

•Line connection error

•Line disconnected

•PPP connection error

•PPP verification error

•PPP connected and disconnected normally

English

– 23 –

Image 24

Contents VCC-WB2000 Network CameraContents Safety Guard Information to userPrecautions Features AccessoriesOperating environment Monitor OUT connector Power indicatorName and Function of Each Part Lens mount capName and Function of Each Part Attaching the Lens Attach the CS mount-type lensFor C mount type Flange Back Adjustment Turn on the camera’s powerConnections Basic ConnectionsInserting the wireless LAN card Removing the wireless LAN cardConnections PPP Dial-up Connections Network Camera Settings Network Camera Settings Installation of Plug-in SoftwareClick the Install button Uninstalling the plug-in softwareClick the Finish button Browser Settings Cookie SettingsCamera uses cookies Computer and Camera Settings Network Connection Settings Closing the initial windowSanyo Network CAMERA, the Unit is Click the Network button in the main menuNetwork SET Settings Set the passwordAccess level UsernameNetwork Speed Http Port NumberWireless LAN SET Settings Current ChannelWEP Encipherment Encryption KEYPPP SET Settings Type in the commands to use for controlling the modemAuthentication Circuit TypeBaud Rate Data SizeMenu Screen and Main Menu AUTO/FINE radio buttonsMenu Screen and Main Menu CAMERA, the Unit is DisconnectedViewing Camera Images Opening and Closing the Initial ScreenWhen you have finished, click the network disconnect button Viewing Camera ImagesSelect the language and then click the SET button Live View Settings Clock Unset indicatorClick the Live View button in the main menu Lit green NetcamLive View Settings Resolution ExpansionSaving Images into a Computer View Frame Operations Click the View Frame button in the main menuBack button Camera Settings Live ImageCamera Title IrisCamera Settings BrightElectronic Shutter White BalanceSetting the camera title Type in the new camera title e.g. CAM1Click the SET button Alarm Setting External Alarm Sensor SettingsClick the Alarm button in the main menu Change the External Alarm setting to NC or noAlarm Setting Motion Detector SET Settings Picture QualityTime Alarm Data Recording Capacity Expansion memory cardsInserting the memory card Removing the memory cardRecording Alarm Data Playing Back Alarm DataClick the Alarm Data indicator while it is red or green Buffer Data View screen Deleting Alarm Images Playing Back Expansion Memory Card ImagesClick the Delete button Pre-alarm and Post-alarm Recording Clock SET Settings Daylight Saving ModeClock SET TimezoneRS-232C Settings RS-232C SET Status CheckingFirmware Version SUB-MICROCOMPUTER VersionTroubleshooting Is the link indicator flashing?If the camera cannot be connected If you forget the IP AddressSpecifications Specifications Dimensions136 mm 85 mm 126 mm 57 mm 12 mm 51 mm Exclusions Page Page Printed on recycled paper 1AC6P1P2545 L5AB2/US 0702KP-CZ