Sanyo VCC-WB2000 Connections, Inserting the wireless LAN card, Removing the wireless LAN card

Page 11

Connections

Connecting to a LAN

Use an Ethernet cable to connect the ETHERNET connector of the camera to the LAN’s Ethernet switching hub.

☞Use a straight-type Ethernet cable.

				PC CARD
	MONITOR	ETHERNET		RS-232C
	OUT			LAN
				LAN
			AC24V	GND
	PC
	POWER 1 2
	MODEM		DC12V
	ALARM IN OUT		DC12V	CLASS 2 WIRING
	ALARM IN OUT			CLASS 2 WIRING

Ethernet cable (straight type)

Ethernet switching hub

Connecting to the Internet

Use an Ethernet cable to connect the ETHERNET connector of the camera to a device such as a router or ADSL modem that is connected to the Internet.

☞If connecting to a router, use a straight-type Ethernet cable. If connecting to an ADSL modem or to some other type of device, refer to the documentation provided with the device for details on what type of connection method should be used.

			PC CARD
	MONITOR	ETHERNET	RS-232C
	OUT	ETHERNET	RS-232C
	OUT		Internet
			Internet

AC24VGND

PC

POWER 1 2

	MODEM	DC12V
	ALARM IN OUT	DC12V
	ALARM IN OUT	CLASS 2 WIRING

Ethernet cable (straight type)

Router or ADSL modem

Connecting to a Wireless LAN

This camera can be connected to wired LANs using an Ethernet cable, and it can be connected to wireless LANS.

☞To connect the camera to a wireless LAN, insert a wireless LAN card into the PC CARD slot of the camera. You should use only the recommended wireless LAN cards and access points.

When a wireless LAN card has been inserted into the camera, the wireless LAN basically has priority, but if you change the network address to a different setting, you can also use the camera with a wired LAN at the same time, so that if a connection cannot be made to the wireless LAN, you can check the settings using the wired LAN instead.

(A) Inserting the wireless LAN card

Insert the wireless LAN card while checking that the direction is correct, and then press the eject button to lock it in.

(B) Removing the wireless LAN card

Press the eject button to eject the wireless LAN card.

(A)

Access point

			PC CARD
MONITOR	ETHERNET		RS-232C
OUT	ETHERNET		RS-232C
OUT
	COM	AC24V	GND	LAN
PC				LAN
POWER 1 2
MODEM		DC12V
ALARM IN OUT		DC12V	CLASS 2 WIRING
ALARM IN OUT			CLASS 2 WIRING

(B)

Note:

•Consult the place of purchase for the camera for details on obtaining a recommended wireless LAN card.

•The ambient temperatures should be less than 40° when the camera is being used with the wireless LAN card inserted.

– 10 –

English

Image 11

Contents Network Camera VCC-WB2000Contents Information to user Safety GuardPrecautions Operating environment FeaturesAccessories Lens mount cap Monitor OUT connectorPower indicator Name and Function of Each PartName and Function of Each Part For C mount type Attaching the LensAttach the CS mount-type lens Turn on the camera’s power Flange Back AdjustmentBasic Connections ConnectionsConnections Inserting the wireless LAN cardRemoving the wireless LAN card PPP Dial-up Connections Network Camera Settings Installation of Plug-in Software Network Camera SettingsClick the Finish button Click the Install buttonUninstalling the plug-in software Camera uses cookies Browser SettingsCookie Settings Computer and Camera Settings Click the Network button in the main menu Network Connection SettingsClosing the initial window Sanyo Network CAMERA, the Unit isUsername Network SET SettingsSet the password Access levelHttp Port Number Network SpeedCurrent Channel Wireless LAN SET SettingsEncryption KEY WEP EnciphermentType in the commands to use for controlling the modem PPP SET SettingsData Size AuthenticationCircuit Type Baud RateAUTO/FINE radio buttons Menu Screen and Main MenuCAMERA, the Unit is Disconnected Menu Screen and Main MenuOpening and Closing the Initial Screen Viewing Camera ImagesSelect the language and then click the SET button When you have finished, click the network disconnect buttonViewing Camera Images Lit green Netcam Live View SettingsClock Unset indicator Click the Live View button in the main menuResolution Expansion Live View SettingsSaving Images into a Computer Back button View Frame OperationsClick the View Frame button in the main menu Iris Camera SettingsLive Image Camera TitleWhite Balance Camera SettingsBright Electronic ShutterClick the SET button Setting the camera titleType in the new camera title e.g. CAM1 Change the External Alarm setting to NC or no Alarm SettingExternal Alarm Sensor Settings Click the Alarm button in the main menuAlarm Setting Time Motion Detector SET SettingsPicture Quality Removing the memory card Alarm Data Recording CapacityExpansion memory cards Inserting the memory cardClick the Alarm Data indicator while it is red or green Recording Alarm DataPlaying Back Alarm Data Buffer Data View screen Click the Delete button Deleting Alarm ImagesPlaying Back Expansion Memory Card Images Pre-alarm and Post-alarm Recording Timezone Clock SET SettingsDaylight Saving Mode Clock SETSUB-MICROCOMPUTER Version RS-232C Settings RS-232C SETStatus Checking Firmware VersionIf you forget the IP Address TroubleshootingIs the link indicator flashing? If the camera cannot be connectedSpecifications 136 mm 85 mm 126 mm 57 mm 12 mm 51 mm SpecificationsDimensions Exclusions Page Page Printed on recycled paper 1AC6P1P2545 L5AB2/US 0702KP-CZ