Toshiba IK-TF5 instruction manual Gain, Shading Correction, Shutter speed mode is EXT Trig mode

Page 10

Result displayed

Meaning

AWB NG

Automatic white balance adjustment cannot be performed because the

NOT AVAILABLE

shutter speed mode is EXT TRIG mode.

AWB NG

Automatic white balance adjustment cannot be performed for other

 

reasons. Such as no white area is included in an object, etc.

2MANU (Manual white balance)

•Set the MODE to MANUAL on the WHT BAL menu. (Refer to the item "7.2 (3) WHT BAL (white balance)".)

•Shoot a known white object, adjust the white balance adjusting the levels of R GAIN and B GAIN on the menu, confirming with a monitor or a waveform monitor.

(Refer to the item "7.2 (3) (3.2) Changing each setting in MANU mode".)

6. 2 Gain

When the image is dark even if the lens iris is open, change the gain (video gain) to get the proper video level.

For the gain adjustment of the unit, MANUAL (Manual) and OFF (0 dB) modes are provided. Select the mode on the GAIN menu. (Refer to the item "7.2 (2) GAIN (Video gain)".)

1MANU (Manual gain)

Gain adjustment is performed on the GAIN menu. The adjustment range is from -3dB to 18dB in 1dB steps. (Refer to the item "7.2 (2) (2.1) (a) Changing the gain in MANUAL mode".)

2OFF

Gain is fixed at 0 dB.

6. 3 Shading Correction

Due to the lens used or the environmental condition, vertical color shading may occur at the top and bottom of the screen. In this case, the shading correction can decrease the color shading. For the shading correction of the unit, MANU (Manual shading correction) and OFF (no shading correction) modes are provided. Select the mode on the PROCESS menu. (Refer to the item "7.2 (4) (4.5) Changing shading correction mode".)

1MANU (Manual Shading)

Perform the correction amount setting on the PROCESS menu, confirming with a monitor or a waveform monitor. (Refer to the "7.2 (4) (4.6) Changing the manual shading correction setting".)

2OFF

The status is no shading correction.

*The shading correction is effective when the lens iris or zoom ratio is fixed. Use the unit with SHAD- ING OFF for variable lens conditions.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents IK-TF5 For Customer UseSafety Precautions Disclaimer May occur in such placesTable of Contents Components Items Controlled by Using on Screen Display Available selectins Preset valueMenu Down button Connection Connector Pin AssignmentsStandard Connection Automatic White Balance Manual White Balance Outline OperationWhite Balance Result displayed MeaningGain Shutter speed mode is EXT Trig modeShading Correction Mode Setting by on Screen Display Using the MenusMenus Changing each setting in Manu modePartial read setting Shutter Electronic shutterChanging each setting in SS synchro. scan mode Changing the shutter speed settingChanging the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time settingChanging each setting in 1P SR mode Changing 1P SR exposure time settingChanging each setting in PW SNR mode Changing each setting in PW SR mode Changing the gain in Manu mode Changing each setting in RR modeChanging each setting in Gain Gain Video gainWHT BAL White balance Changing R pedestal Changing shading correction modeChanging master pedestal Changing B pedestalOption Adjusting horizontal phaseSync Changing RGB SyncShutter mode HD input VD input Setting to factory setting statusExternal sync signal input conditions External SyncSetting by 1H Setting by the frameUsing the unit with external sync signal Synchro. Scan Operation1P SNR 1 Pulse Sync Non Reset EXT Trig External triggerVD OUT*3 Video Index 1P SR 1 Pulse Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Video output 525H PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingInput Timing Chart Example RR Reset restartLong Term Exposure Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning onInput Output Signal Specificatoins Horizontal Output Waveform Timing Chart CCD Output Waveform Timing ChartVertical Output Waveform Timing Chart Specifications RGB, 3CCDBefore Making a Service Call External Appearance DiagramSymptom Items to be checked Step-by-step Procedures How to Obtain Warranty Service Limited One 1 Year Warranty of Labor and PartsImaging Systems Division
Top Page Image Contents