Toshiba IK-TF5 Changing each setting in E.TRG mode, Changing each setting in 1P SNR mode

Page 14

(1. 3) Changing each setting in E.TRG mode

The E.TRG has five modes; 1P SNR, 1P SR, PW SNR, PW SR, RR.

First set the "→ " to MODE and select E. TRG, then set the "→ " to E.TRG and select the desired E.TRG mode.

(1. 3. 1) Changing each setting in 1P SNR mode

Move up down By pushing

MENU UP, DOWN

Set by pushing

DATA UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	1P SNR
TRG.P
TRG.P
EXP.	16ms
PART	OFF

•Shutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•

Input trigger pulse setting at 1P SNR and 1P SR

Input trigger pulse : positive polarity

Input trigger pulse : negative polarity

•

Exposure time setting at 1P SNR and 1P SR

0.02 ms

0.4 ms

1 ms

16 ms

0.02 ms step 0.1 ms step

1 ms step

• Partial read switch

OFF/ON

<MODE = E.TRG E.TRG = 1P SNR>

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→ " to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing 1P SNR exposure time setting

1Set the "→ " to EXP. by pushing [MENU UP], [MENU DOWN] buttons.

2Set the exposure time by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

(c) Changing the partial read setting

1Set the "→ " to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF or ON by pushing [DATA UP], [DATA DOWN] buttons.

14

Image 14

Contents IK-TF5 For Customer UseSafety Precautions Disclaimer May occur in such placesTable of Contents Components Items Controlled by Using on Screen Display Available selectins Preset valueMenu Down button Standard Connection Connector Pin AssignmentsConnection Automatic White Balance Manual White Balance Outline OperationWhite Balance Result displayed MeaningShading Correction Shutter speed mode is EXT Trig modeGain Mode Setting by on Screen Display Using the MenusMenus Changing each setting in Manu modePartial read setting Shutter Electronic shutterChanging each setting in SS synchro. scan mode Changing the shutter speed settingChanging the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time settingChanging each setting in 1P SR mode Changing 1P SR exposure time settingChanging each setting in PW SNR mode Changing each setting in PW SR mode Changing the gain in Manu mode Changing each setting in RR modeChanging each setting in Gain Gain Video gainWHT BAL White balance Changing R pedestal Changing shading correction modeChanging master pedestal Changing B pedestalOption Adjusting horizontal phaseSync Changing RGB SyncShutter mode HD input VD input Setting to factory setting statusExternal sync signal input conditions External SyncSetting by 1H Setting by the frameUsing the unit with external sync signal Synchro. Scan Operation1P SNR 1 Pulse Sync Non Reset EXT Trig External triggerVD OUT*3 Video Index 1P SR 1 Pulse Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Video output 525H PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingLong Term Exposure RR Reset restartInput Timing Chart Example Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning onInput Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Specifications RGB, 3CCDSymptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service