Toshiba IK-TF5 Operation, Automatic White Balance Manual White Balance Outline

Page 9

6. OPERATION

1Referring to the item " 5. CONNECTION", connect each equipment correctly.

2Turn on the connected equipment and the camera.

3Pointing the lens at the object, operate the lens iris adjustment, focus adjustment, etc..

4Referring to the item "6.1 White Balance", operate the adjustment.

5Referring to the items "6.2 Gain, 7. MODE SETTING BY ON SCREEN DISPLAY", select the necessary items.

6. 1 White Balance

For the white balance adjustment for this unit, AWB (Automatic White Balance) and MANU (Manual white balance) adjustments are provided. Referring to the items "7.2 (3) WHT BAL (White balance), 7. MODE SET- TING BY ON SCREEN DISPLAY", select the desired mode.

 

AWB

MANU

 

(Automatic White Balance)

(Manual White Balance)

Outline

Adjust white balance by displaying the

Adjust the white balance manually using

 

white object inside the area set by AWB

the WHT BAL menu while shooting the

 

menu and pressing the [DATA UP] button.

white object.

Notes

When the shutter mode is EXT TRIG,

Adjustment is performed by confirming

 

AWB is not available.

with a waveform monitor.

1AWB (Automatic white balance)

Set the MODE to AWB on the WHT BAL menu.

Perform the C.TEMP (color temperature conversion) setting, if necessary. (Refer to the item "7.2 (3) WHT BAL (White balance)".)

3200K : Appropriate for indoor shooting.

5600K : Appropriate for outdoor shooting.

If the index menu/menu is displayed, press the [DISP] button to disable the color bar pattern or the character display on the menu.

Shoot a known white object that fills the screen and push [DATA UP] button for approx. 1 second.

The character AWB blinks on the screen when the AWB starts.

The character AWB stops blinking when the AWB finishes, and the result is displayed for approx. 1 second.

Result displayed

Meaning

AWB OK

Automatic white balance adjustment finished correctly.

AWB NG LEVEL

Automatic white balance adjustment cannot be performed because the

LOW

video level is too low.

 

Set the video level properly.

AWB NG

Automatic white balance adjustment cannot be performed because the

LEVEL HIGH

video level is too high.

 

Set the video level properly.

AWB NG

Automatic white balance adjustment cannot be performed because the

C. TEMP HIGH

color temperature is too low.

 

If the C.TEMP is set to 5600K, set to 3200K.

 

If the message appears with the C.TEMP set to 3200K, change the

 

illumination or use a color temperature conversion filter.

AWB NG

Automatic white balance adjustment cannot be performed because the

C. TEMP HIGH

color temperature is too high.

 

If the C.TEMP is set to 3200K, set to 5600K.

 

If the message appears with the C.TEMP set to 5600K, change the

 

illumination or use the color temperature conversion filter.

 

 

9

Image 9
Contents For Customer Use IK-TF5Safety Precautions May occur in such places DisclaimerTable of Contents Components Available selectins Preset value Items Controlled by Using on Screen DisplayMenu Down button Connector Pin Assignments ConnectionStandard Connection White Balance OperationAutomatic White Balance Manual White Balance Outline Result displayed MeaningShutter speed mode is EXT Trig mode GainShading Correction Using the Menus Mode Setting by on Screen DisplayPartial read setting Changing each setting in Manu modeMenus Shutter Electronic shutterChanging the shutter speed setting Changing each setting in SS synchro. scan modeChanging each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingChanging 1P SR exposure time setting Changing each setting in 1P SR modeChanging each setting in PW SNR mode Changing each setting in PW SR mode Changing each setting in Gain Changing each setting in RR modeChanging the gain in Manu mode Gain Video gainWHT BAL White balance Changing master pedestal Changing shading correction modeChanging R pedestal Changing B pedestalSync Adjusting horizontal phaseOption Changing RGB SyncExternal sync signal input conditions Setting to factory setting statusShutter mode HD input VD input External SyncUsing the unit with external sync signal Setting by the frameSetting by 1H Synchro. Scan OperationEXT Trig External trigger 1P SNR 1 Pulse Sync Non ResetVD OUT*3 Video Index 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Sync ResetPW SNR Pulse width trigger SYNC-NON Reset Video output 525H 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETRR Reset restart Input Timing Chart ExampleLong Term Exposure Partial Read When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning onInput Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart RGB, 3CCD SpecificationsExternal Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division