Toshiba IK-TF5 instruction manual Option, Adjusting horizontal phase, Changing RGB Sync

Page 21

( 5 ) SYNC

When an external sync signal is input, the display changes from INT (internal sync) to EXT (external sync) automatically.

Move up down					Set by pushing
By pushing					Set by pushing
By pushing					DATA UP, DOWN
MENU UP, DOWN					DATA UP, DOWN
MENU UP, DOWN

		-- SYNC --
		MODE	EXT


		H PHASE	0


		RGB SYNC	G

•Sync system display

•H PHASE -100 to 100

•RGB SYNC G, ALL ON, ALL OFF

(5. 1) Adjusting horizontal phase

1Set the "→ " to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.

2Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.

(5. 2) Changing RGB SYNC

1Set the "→ " to RGB SYNC by pushing [MENU UP], [MENU DOWN] buttons.

2Select G, ALL ON or ALL OFF by pushing [DATA UP], [DATA DOWN] buttons.

( 6 ) OPTION

Move up down By pushing

MENU UP, DOWN

Set by pushing

DATA UP, DOWN

-- OPTION --

BAUD RATE

9600

• RS232C baud rate 9600, 19200

(6. 1) Changing RS232C communication baud rate

1Set the "→ " to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.

2Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons.

21

Image 21

Contents For Customer Use IK-TF5Safety Precautions May occur in such places DisclaimerTable of Contents Components Available selectins Preset value Items Controlled by Using on Screen DisplayMenu Down button Connector Pin Assignments ConnectionStandard Connection White Balance OperationAutomatic White Balance Manual White Balance Outline Result displayed MeaningShutter speed mode is EXT Trig mode GainShading Correction Using the Menus Mode Setting by on Screen DisplayPartial read setting Changing each setting in Manu modeMenus Shutter Electronic shutterChanging the shutter speed setting Changing each setting in SS synchro. scan modeChanging each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingChanging 1P SR exposure time setting Changing each setting in 1P SR modeChanging each setting in PW SNR mode Changing each setting in PW SR mode Changing each setting in Gain Changing each setting in RR modeChanging the gain in Manu mode Gain Video gainWHT BAL White balance Changing master pedestal Changing shading correction modeChanging R pedestal Changing B pedestalSync Adjusting horizontal phaseOption Changing RGB SyncExternal sync signal input conditions Setting to factory setting statusShutter mode HD input VD input External SyncUsing the unit with external sync signal Setting by the frameSetting by 1H Synchro. Scan OperationEXT Trig External trigger 1P SNR 1 Pulse Sync Non ResetVD OUT*3 Video Index 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Sync ResetPW SNR Pulse width trigger SYNC-NON Reset Video output 525H 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETRR Reset restart Input Timing Chart ExampleLong Term Exposure Partial Read When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning onInput Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart RGB, 3CCD SpecificationsExternal Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division