Toshiba IK-TF5 instruction manual Safety Precautions

Page 2

SAFETY PRECAUTIONS

Read the following safety precautions carefully before using this product. These instructions contain valuable information on safe and proper use that will prevent harm and damage to the operator and other persons. Make sure that you fully understand the following details (indications, graphic sym- bols) before proceeding to the remaining sections in this manual.

Indication definitions

Indication

Meaning

 

 

 

This indicates the existence of a haz-

 

ard that death or catastrophic bodily

Warning

injury*1 may result from improper

 

use.

 

This indicates the existence of a haz-

 

ard that bodily injury*2 or property

Caution

damage*3 may result from improper

use.

 

 

 

*1: Catastrophic bodily injury means loss of eye- sight, burns (high and low temperatured),

Graphic symbol definitions

SymbolMeaning

“” indicates a prohibited action that must not be carried out. The actual prohibited action is indicated in the symbol or nearby graphically or de- scribed in text.

“” indicates a mandatory action that must be carried out. The actual instruction is indicated in the sym- bol or nearby graphically or de- scribed in text.

shock, fracture, poisoning, etc. which leaves a sequela and require hospitalization or prolonged treatment.

*2: Bodily injury means injuries, burns and electric shock which does not require hospitalization or prolonged treatment.

*3: Property damage means extended harm to home, household effects, domesticated animals, and pets.

Warning

•Stop operation immediately when any abnormality or defect occurs.

Use during an abnormal condition; such as emitting smoke, burning odors, damage from dropping invasion of foreign objects, etc. may cause fire and/or electric shock. Be always sure to disconnect the power plug from the electrical outlet (socket) at once and contact your dealer.

• Avoid installing in a shower room or a bathroom. This may cause fire and/or electric shock.

• Do not operate in places with possibility of becoming wet. This may cause fire and/or electric shock.

•Do not repair, disassemble and/or modify by yourself.

This may cause fire and/or electric shock. Be always sure to contact your dealer for internal repair, check and cleaning of the product.

• Use the specified power supply.

Otherwise, a fire or an electric shock may occur.

•Don’t place things or materials on the unit.

Ingress of foreign materials such as metallic things and liquid into the unit may cause a fire or an electric shock.

•Do not put the product in an unstable, slanting and/or vibrated place. Drop and/or fail of the product may cause injury.

•Do not touch the power cord or other connection cables during a thunderstorm. This might cause electric shock.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents IK-TF5 For Customer UseSafety Precautions Disclaimer May occur in such placesTable of Contents Components Items Controlled by Using on Screen Display Available selectins Preset valueMenu Down button Standard Connection Connector Pin AssignmentsConnection Automatic White Balance Manual White Balance Outline OperationWhite Balance Result displayed MeaningShading Correction Shutter speed mode is EXT Trig modeGain Mode Setting by on Screen Display Using the MenusMenus Changing each setting in Manu modePartial read setting Shutter Electronic shutterChanging each setting in SS synchro. scan mode Changing the shutter speed settingChanging the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time settingChanging each setting in 1P SR mode Changing 1P SR exposure time settingChanging each setting in PW SNR mode Changing each setting in PW SR mode Changing the gain in Manu mode Changing each setting in RR modeChanging each setting in Gain Gain Video gainWHT BAL White balance Changing R pedestal Changing shading correction modeChanging master pedestal Changing B pedestalOption Adjusting horizontal phaseSync Changing RGB SyncShutter mode HD input VD input Setting to factory setting statusExternal sync signal input conditions External SyncSetting by 1H Setting by the frameUsing the unit with external sync signal Synchro. Scan Operation1P SNR 1 Pulse Sync Non Reset EXT Trig External triggerVD OUT*3 Video Index 1P SR 1 Pulse Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Video output 525H PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingLong Term Exposure RR Reset restartInput Timing Chart Example Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning onInput Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Specifications RGB, 3CCDSymptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service
Top Page Image Contents