Toshiba IK-TF5 Menus, Shutter Electronic shutter, Changing each setting in Manu mode

Page 12

7. 2 Menus

• Select the menu to change the setting by referring the item "7.1 Using the Menues".)

• When the [MENU UP], [MENU DOWN] buttons are pushed, the "" on the screen moves up and down. Move the "" to the item to change.

( 1 ) SHUTTER (Electronic shutter)

The electronic shutter has three modes; MANU (Manual), SS (Synchro. Scan), EXT TRIG (External trigger).

Set the "" to "MODE" and push [DATA UP], {DATA DOWN] button to select the desired mode among "MANU", "SS", "EXT TRIG".

(1. 1) Changing each setting in MANU mode

Move up down

 

Set by pushing

By pushing

 

 

DATA UP, DOWN

MENU UP, DOWN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-- SHUTTER --

 

MODE

MANU

MANU

50000

PART

OFF

<MODE = MANUAL>

Shutter mode MANU, SS, E.TRG

Shutter speed setting

OFF, 100 (1/100s), 250 (1/250s), 500 (1/500s) 1000 (1/1000s), 2000 (1/2000s), 4000 (1/4000s) 10000 (1/10000s), 25000 (1/25000s)

50000 (1/50000s)100000 (1/100000s)

*100 (1/100s) may not be specified at PART (Partial read) ON setting.

• Partial read switch OFF/ON

(a) Changing the shutter speed

1Set the "" to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2Set the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.

(b) Partial read setting

1Set the "" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF or ON by pushing [DATA UP], [DATA DOWN] buttons.

12

Image 12
Contents IK-TF5 For Customer UseSafety Precautions Disclaimer May occur in such placesTable of Contents Components Items Controlled by Using on Screen Display Available selectins Preset valueMenu Down button Connector Pin Assignments ConnectionStandard Connection Operation White BalanceAutomatic White Balance Manual White Balance Outline Result displayed MeaningShutter speed mode is EXT Trig mode GainShading Correction Mode Setting by on Screen Display Using the MenusChanging each setting in Manu mode Partial read settingMenus Shutter Electronic shutterChanging each setting in SS synchro. scan mode Changing the shutter speed settingChanging each setting in E.TRG mode Changing each setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingChanging each setting in 1P SR mode Changing 1P SR exposure time settingChanging each setting in PW SNR mode Changing each setting in PW SR mode Changing each setting in RR mode Changing each setting in GainChanging the gain in Manu mode Gain Video gainWHT BAL White balance Changing shading correction mode Changing master pedestalChanging R pedestal Changing B pedestalAdjusting horizontal phase SyncOption Changing RGB SyncSetting to factory setting status External sync signal input conditionsShutter mode HD input VD input External SyncSetting by the frame Using the unit with external sync signalSetting by 1H Synchro. Scan Operation1P SNR 1 Pulse Sync Non Reset EXT Trig External triggerVD OUT*3 Video Index 1P SR 1 Pulse Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Video output 525H PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingRR Reset restart Input Timing Chart ExampleLong Term Exposure When Partial Scanning Mode is on Partial ReadPartial Scanning OFF All pixels scanning Partial Scanning onInput Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart Specifications RGB, 3CCDExternal Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division