Arcam A80, P80 manual Safety guidelines, Important safety instructions, Safety compliance

Page 2

Safety guidelines

CAUTION

ATTENTION

 

 

RISK OF ELECTRIC

RISQUE DE CHOC ELECTRIQUE

SHOCK DO NOT OPEN

NE PAS OUVRIR

 

 

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be

of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket and insert the plug fully into the socket.

Important safety instructions

This product is designed and manufactured to meet strict quality and safety standards. However, you should be aware of the following installation and operation precautions:

1. Take heed of warnings and instructions

You should read all the safety and operating instructions before operating this appliance. Retain this handbook for future reference and adhere to all warnings in the handbook or on the appliance.

2. Water and moisture

The presence of electricity near water can be dangerous. Do not use the appliance near water – for example next to a bathtub, washbowl, kitchen sink, in a wet basement or near a swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not spilled into the enclosure through any openings. Liquid filled objects such as vases should not be placed on the equipment.

4. Ventilation

Do not place the equipment on a bed, sofa, rug or similar soft surface, or in an enclosed bookcase or cabinet, since ventilation may be impeded. We recommend a minimum distance of 50mm (2 inches) around the sides and top of the appliance to provide adequate ventilation.

5. Heat

Locate the appliance away from naked flames or heat producing equipment such as radiators, stoves or other appliances (including other amplifiers) that produce heat.

6. Climate

The appliance has been designed for use in moderate climates.

7. Racks and stands

Only use a rack or stand that is recommended for use with audio equipment. If the equipment is on a portable rack it should be moved with great care, to avoid overturning the combination.

A80/P80

8. Cleaning

Unplug the unit from the mains supply before cleaning.

The case should normally only require a wipe with a soft, damp, lint-free cloth. Do not use paint thinners or other chemical solvents for cleaning.

We do not advise the use of furniture cleaning sprays or polishes as they can cause indelible white marks if the unit is subsequently wiped with a damp cloth.

9. Power sources

Only connect the appliance to a power supply of the type described in the operating instructions or as marked on the appliance.

10. Power-cord protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, and the point where they exit from the appliance.

11. Grounding

Ensure that the grounding means of the appliance is not defeated.

12. Power lines

Locate any outdoor antenna/aerial away from power lines.

13. Non-use periods

If the unit has a standby function, a small amount of current will continue to flow into the equipment in this mode. Unplug the power cord of the appliance from the outlet if left unused for a long period of time.

14. Abnormal smell

If an abnormal smell or smoke is detected from the appliance, turn the power off immediately and unplug the unit from the wall outlet. Contact your dealer immediately.

15. Servicing

You should not attempt to service the appliance beyond that described in this handbook. All other servicing should be referred to qualified service personnel.

16. Damage requiring service

The appliance should be serviced by qualified service personnel when:

A.the power-supply cord or the plug has been damaged, or

B.objects have fallen, or liquid has spilled into the appliance, or

C.the appliance has been exposed to rain, or

D.the appliance does not appear to operate normally or exhibits a marked change in performance, or

E.the appliance has been dropped or the enclosure damaged.

Safety compliance

This product has been designed to meet the IEC 60065 international electrical safety standard.

2

Image 2
Contents A80 P80 Safety compliance Safety guidelinesImportant safety instructions Contents Using this handbookSafety Connecting to a power supply Installation A80 amplifierConnecting to loudspeakers Positioning the unitPre/power amplifier connections Different output typesUsing your A80 amplifier Front panel controlsRecording Tape-to-tape copying dubbingTo their factory defaults Setting up your A80 amplifierAdjusting listening settings Menu mapUsing the remote control CR-389 Remote ControlRemote switching Installation P80 power ampliferConnecting to power, loudspeakers and other equipment Using your P80 power amplifier Power and power indicator lightBefore you start Bi-wiring and bi-amping loudspeakersBi-wiring your loudspeakers Service information Technical specificationsRemote-control codes Guarantee On-line registrationRespect des consignes de sécurité Consignes de sécuritéNormes de sécurité Table des matières Utilisation de ce manuelSécurité DépannageBranchement des haut-parleurs Installation A80 integrated amplifierMise en place de l’appareil Alimentation de veille Branchement sur d’autres appareilsBranchement Connexions préamplificateur/amplificateur de PuissanceCommandes du panneau avant Utilisation de l’amplificateur intégré A80Enregistrement Utilisation du bouton TapeRéglage des paramètres d’écoute Réglage de l’amplificateur intégré A80Introduction Utilisation de la télécommande Télécommande CR-389Détection du signal Installation amplificateur de puissance P80Arrêt et mise en marche à l’aide de la télécommande Power et voyant lumineux d’alimentation Utilisation de l’amplificateur de puissance P80Avant de commencer Bi-câblage des haut-parleursDépannage Spécifications techniquesTableau des commandes IR Garantie Inscription en ligneEinhaltung von Sicherheitsbestimmungen SicherheitsrichtlinienSicherheitsrichtlinien Inhalt Hinweise zum HandbuchSicherheit Anschließen der Lautsprecher Installation Vollverstärker A80Aufstellen des Gerätes Anschließen der StromversorgungStandby-Betrieb Anschließen anderer GeräteAnschließen Vorverstärker/EndstufenanschlüsseBedienung des Vollverstärkers A80 Steuerelemente an der VorderseiteAufnahme Empfänger für die FernbedienungEinführung Maximum ‘On’ Volume Mit dem Hauptregler können Sie beimEinstellen des Vollverstärkers A80 Anpassung der HöreinstellungenTasten zum Auswählen der Audioquelle Modell CR-389UP und Down Fernschaltung Installation Endstufe P80Signalerkennung Indem Sie eine Verbindung vom Remote IN-Anschluss derBedienung der Endstufe P80 Erste Schritte Bi-Wiring und Bi-Amping der LautsprecherBi-Wiring der Lautsprecher Kundendienst Technische DatenTabelle der IR-Befehle Online-Registrierung Veiligheidsnaleving VeiligheidsrichtlijnenVeiligheidsvoorschriften Op lichtnet, luidsprekers en andere apparatuur VeiligheidInhoudsopgave KlantendienstAansluiten op luidsprekers Installatie geïntegreerde versterker A80De eenheid plaatsen Aansluiting op het lichtnetStandby-modus Aansluiting op andere apparatuurAansluiten Voorversterker-/eindversterkeraansluitingenUw geïntegreerde versterker A80 gebruiken Knoppen aan de voorkantOpnemen Kopiëren van tape naar tape dubbingUw geïntegreerde versterker A80 instellen Luisterinstellingen regelenAfstandsbediening CR-389 Volume en dempenDe afstandsbediening gebruiken Omhoog en OmlaagOp afstand bedienen Installatie eindversterker P80Op lichtnet, luidsprekers en andere apparatuur aansluiten DoorlussenPower en aan-/uitlampje Bediening van uw eindversterker P80Zo voert u bi-wiring van luidsprekers uit Bi-wiring en bi-amping van luidsprekersBi-wiring van uw luidsprekers Voordat u begintKlantendienst Technische specificatiesBronkeuze-instructies Codes op de afstandsbedieningStroomtoevoerinstructies Menunavigatie-instructiesOnline-registratie A80/P80 A80/P80 Telephone +44 01223 Fax +44 01223 Issue

P80, A80 specifications

The Arcam P80 and A80 are two prominent products in the realm of high-fidelity audio, designed to offer audiophiles superior sound quality and a seamless listening experience. Arcam, renowned for its dedication to innovation and excellence, has equipped these models with advanced technologies that elevate their performance.

The Arcam P80 is a robust power amplifier that delivers a remarkable 80 watts per channel into 8 ohms. This powerful amplification ensures that even the most demanding speakers will be driven effortlessly, providing dynamic sound reproduction. One of the standout features of the P80 is its Class G amplification design. This technology enhances efficiency by utilizing multiple output stages, allowing the amplifier to switch between power levels depending on the signal demands. This minimizes distortion and maximizes sound quality, resulting in crystal-clear audio across various frequencies.

Equipped with high-quality components, the P80 employs a toroidal transformer that minimizes electromagnetic interference and optimizes power delivery. This attention to detail translates to a more refined sound, making it an excellent choice for both music enthusiasts and home theater setups. The amplifier also features multiple input options, including both balanced and unbalanced connections, ensuring compatibility with a wide range of audio sources.

On the other hand, the Arcam A80 is an integrated amplifier that combines both preamplifier and power amplifier functionalities into a single unit. With an output of 80 watts per channel into 8 ohms, it shares the P80's commitment to power and performance. The A80 incorporates a high-quality digital-to-analog converter, enhancing the sound quality of digital sources, and features multiple inputs for flexibility when connecting various devices.

The A80 also utilizes a high-grade phono stage for vinyl enthusiasts, enabling users to connect turntables directly and enjoy their favorite records with outstanding fidelity. The design emphasizes simplicity and elegance, with a user-friendly interface and intuitive controls, making it a perfect addition to both contemporary and traditional home audio setups.

In summary, the Arcam P80 and A80 represent the pinnacle of audio engineering, incorporating advanced technologies such as Class G amplification, high-quality DACs, and versatile input options. They deliver an exceptional listening experience, providing power, clarity, and musicality that will satisfy even the most discerning audiophiles. Whether used individually or as a part of a comprehensive audio system, these amplifiers exemplify the quality that has made Arcam a trusted name in high-fidelity sound.