JVC LWT0254-001B-H manual 24 EN, Camera Function 1 Screen, Camera Function 2 Screen

	Setting Up the Camera Using RM-P2580 (continued)
24 EN
	CAMERA FUNCTION 1 Screen
		Item				Function/Set Value		Initial
								Value
V. PHASE				This adjusts the vertical synchronization to those of other cameras when a selector switch for
				the synchronizing system on the Ceilling Mount is at LL. (50 Hz *(60Hz) power region only.)
				*( ) : TK-C625U				0
				Set values : TK-C625E : -156 to 0 to 156
						TK-C625U : -131 to 0 to 131
POS.TITLE LOC.				Use this to set the display positions of position and area titles.
				UP-L		: Display at the top left of the screen. DOWN-C : Display at the lower center of the screen.
				DOWN-L : Display at the bottom left of the screen. UP-R : Display at the top right of the screen.				UP-L
				UP-C		: Display at the upper center of the screen. DOWN-R : Display at the bottom right of the screen.
				[Set values: UP-L, DOWN-L, UP-C, DOWN-C, UP-R, DOWN-R]
PRIVATE MASK..				This function grays out sections on the captured image that are not to be displayed. The
				grayed out section moves accordingly during panning, tilting and zooming.				^
				APRIVATE MASK SetupB (A pg. 31)
MANUAL DISPLAY			Use this to set whether to display AMANUALB on the screen when manual operation is
				performed at non-preset positions using the remote control unit. When this is set to AONB,
			AAUTO PANB and AAUTO TRACEB will also be displayed on the screen respectively during
			Auto Pan and Auto Trace operations, in addition to manual operation.
			ON		: Display "MANUAL".			ON
			OFF : Do not display "MANUAL".
				MEMO
				● Even when this item is set to AONB, display will not appear when the AAREA DISPLAYB (A pg. 26) item
				is set to ATITLEB or ADIRB, or when a preset position is selected.
	CAMERA FUNCTION 2 Screen
		Item				Function/Set Value		Initial
								Value
FLIP				When Tilt operation is performed with this item set to AOFFB, the camera will stop at the
				position where it is facing directly downwards. When an object passes beneath the camera,
				the camera will A point downwards, B pan 180°, and C point upwards. In other words, the
				camera needs to perform these 3 steps. By using the Auto Flip function helps to reduce the
				number of operations.
				Set this function when shooting an object that passes beneath the camera.
				OFF		: Auto Flip is disabled.
				AUTO 1 : The camera pans 180° automatically and stops when the object comes beneath
						the camera. In this case, the camera and PAN/TILT lever operations function in		OFF
						the same direction.
				AUTO 2		: The camera pans 180° automatically when the object comes beneath	the
						camera, and direction of the camera and TILT lever operations function in
						opposite directions. Set this function to enable continuous operation. Stopping
						this operation restores the camera to its normal direction of operation.
				AUTO 3		: The camera pans 180° automatically when the object comes beneath	the
						camera, and direction of the camera and TILT lever operations function in
						opposite directions. The camera will return to its normal direction of operation
						upon a lapse of 10 seconds or more after the operation stops.
VAR. P/T SPEED				Use this to alter the Pan (horizontal) and Tilt (vertical) speed automatically according to the
				zoom of the lens. Pan and Tilt speed will slow down when the zoom lens is set to TELE, and
				speeds up when set to Wide. Set this when shooting objects with a different zoom ratio.				ON
				OFF : Disabled.
				ON	: Enabled.
EASY AF				When this is set to ON, the auto focus (AF) function will be automatically activated during
				manual Pan, Tilt or Zoom operation. This function is convenient when frequent manual
				operations are expected as it eliminates the need to adjust focus after every manual
				operation of the camera.
				OFF : Disabled.				OFF
				ON	: Enabled.
				MEMO
				● Auto focusing may sometimes fail to bring an object into accurate focus. (A pg. 6) In this case, adjust
				focus manually.