40 Setting Up the Camera Using RM-P2580 (continued)
EN
AUTO TRACE Setup
MENU button |
|
|
| AUTO PAN button | ||||||
| SET button |
|
|
|
| PAN lever | ||||
|
|
|
|
|
|
|
| |||
|
| CAMERA button |
|
|
|
|
| |||
|
|
|
|
|
|
| REMOTE CONTROL UNIT | |||
SETUP | POWER | CAMERA |
| POSITION |
|
|
|
|
| |
|
|
|
|
|
|
|
| |||
MENU | SET | ALARM |
|
|
|
| AUTO | |||
|
| KEY LOCK |
|
|
|
|
|
|
|
|
| LENS |
|
| CAMERA/POSITION |
|
| PAN/TILT |
| ||
| SPEED |
| 1 | 2 | 3 | CAMERA | POSI- |
|
|
|
|
|
|
|
|
|
| TION |
|
|
|
CLOSE | IRIS | OPEN | 4 | 5 | 6 | OPTION | OPTION |
|
|
|
|
|
| 1 | 2 |
|
|
| |||
NEAR | FOCUS | FAR | 7 | 8 | 9 | AUTO | AUTO |
|
|
|
| AF |
| PAN | PATROL |
|
|
| |||
| WIDE ZOOM TELE |
| CLEAR | 0 |
| ENTER |
|
|
|
|
|
| /HOME |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Numeric ENTER AUTO
keys button PATROL
Use the AUTO TRACE screen to set the Auto Trace function, which stores and reproduces the actions of a manual camera operation (up to 30 seconds).
1Select the camera. (A RM-P2580 AINSTRUCTIONSB)
CAMERA buttonNNumeric key (Camera Number) NENTER button
●The picture of the selected camera is output.
2 Display the MENU screen. (A pg. 21, steps 2 to 4)
MENU button (3 sec.) N Select ACAMERA..B using the PAN lever NSET button.
●The AMENUB screen will be displayed.
3 Tilt the PAN lever up or down to move the cursor (E) to AAUTO PAN/PATROL/TRACE..B and press the SET button.
●The AAUTO PAN/PATROL/TRACEB screen is displayed.
4 Move the cursor (E) to AAUTO TRACE SET..B and press the
SET button.
ZOOM button
FOCUS button
button
●The AAUTO TRACE SETB screen is displayed.
5 Set the patrol start position.
MENU
CAM.FUNCTION1..
CAM.FUNCTION2..
CAM.TITLE/ALARM..
CAM.ALC/VIDEO..
AUTO PAN/PATROL/TRACE.. POS.FUNCTION SET.. FACTORY SETTINGS..
<MENU> EXIT <SET> SUB MENU
MENU Screen
Using the PAN lever and the ZOOM button and FOCUS button, set the camera position at which the Auto Trace function is to be started.
6 Press the SET button (to start memorization of manual camera operations).
●Auto Trace starts. Operate the camera using the PAN lever, and the ZOOM button and FOCUS button.
●The Auto Trace function can memorize camera operations for up to 30 seconds, during this period ALEARNING REMAINDER T: **sB is displayed in the screen.
AUTO PAN / PATROL / TRACE
AUTO PAN SET..
AUTO PATROL SET..
AUTO TRACE SET..
AUTO PAN / TRACE VIDEO ..
RM . A . PAN KEY | A . PAN |
RM . A . PATROL KEY | A . PATROL |
<MENU> RETURN <SET> SUB MENU
AUTO PAN/PATROL/TRACE Screen
AUTO TRACE SET
SET START POSITION
<MENU> RETURN <SET> LEARN
AUTO TRACE SET Screen
AUTO TRACE SET
SET START POSITION
LEARNING REMAINDER T : ∗ ∗ s <MENU> RETURN <SET> END
●Storage finishes automatically after 30 seconds.
●Perform step 7 only when finishing the storage but before 30 seconds elapses.
●Recording time may shorten depending on details of the operation. (Shortest recording duration is approximately 10 seconds)
7 Press the SET button to end the memorization of manual camera operations.
●This ends recording of Auto Trace and a message indicating ADATA SAVEDB will be displayed.
8 Press the MENU button.
●The screen returns to the AAUTO PAN/PATROL/TRACEB menu.
MEMO
●Saving of auto operations will not be possible when this menu is displayed.
●Manual Pan Limit remains valid when this menu is displayed.
●Manual Pan Limit can be set upon exiting this menu without affecting the Auto Trace operation.
●Auto Trace allows easy recording of manual operations, but positions may not be accurately reproduced during playback.
To Start Auto Trace Function
To let the camera execute reproduction of the Auto Trace operation, it is required to set the Auto Trace function in the AUTO PAN button or AUTO PATROL button of the
A ARM. A. PAN KEYB (A pg. 29) and ARM. A. PATROL KEYB (A pg. 29). When the button to which the Auto Trace function is set is pressed, the lamp in the button lights up and Auto Trace reproduction starts.
The Auto Trace reproduction will repeat continually with a pause of 30 seconds between each operation.
To end the Auto Trace reproduction, press the button to which the Auto Trace function is set again so that the lamp in the button turns off.
AUTO TRACE SET Screen