JVC LWT0254-001B-H Ceiling Mount Setting Switch Side Camera, Clamping Hole x, Auxiliary Switch

Page 8

8 Introduction (continued)

EN

Name and Function of Parts (continued)

8 Ceiling Mount (Setting Switch Side)

8 Camera

J

ONTFR

K

NS O

M

P

L

J

QR

JClamping Hole (x 4)

Use these holes to attach the camera to the ceiling or ceiling recessed bracket (WB-S625: sold separately).

KCamera Connection Terminal (Female)

Connect this to the Camera Connection Terminal (Male) O on the camera.

L[Machine ID] Machine ID Setting Switch

For systems such as RM-P2580 that make use of the RS- 485 multi-drop communication system, set the ID for individual cameras. (A pg. 14)

MSetting Switch

For performing settings such as PROTOCOL and SYNC. (A pg. 13)

NAuxiliary Switch

This switch cannot be used.

OCamera Connection Terminal (Male)

For connection to the Camera Connection Terminal (Female) K on the ceiling mount.

PCamera Clamping Bracket

Insert the Locking Screw F into this bracket and tighten to fasten the camera and the ceiling mount.

QLens

The lens is not a replaceable item.

RDome Cover

The dome cover is fragile. Take care when handling it.

SFastening Hook for Safety Wire

Hang the Safety Wire A (to prevent camera from falling down) on the ceiling mount to this hook.

Image 8
Contents For Customer Use Model No. TK-C625 Serial No LWT0254-001B-HInformation Safety PrecautionsRisk of Electric Shock Do not Open Important Safeguards Characteristics ContentsOperating Precautions Zooming operation Preset positions→ Refer to Name and Function of Parts Ceiling Mount Setting Switch Side Camera Machine ID Machine ID Setting SwitchSetting Switch Auxiliary SwitchConnections & Installation Multi-Drop Communication System110 K Video SWITCHER, etcCAM2 Length of stub CAM32 Length of stub Point-to-Point Communication System ACable ConnectionsB a pg Terminal side of the Ceiling MountSimplex DuplexExample connection with an RM-P2580 Sync Switch SettingsProtocol Machine ID Setting Switch Displayed as ID- LL. CheckMachine ID Installation Cable Connections Make a hole in the ceiling Connect the cable to this cameraRemove the Cover Lead the cable through the CoverConnecting an RG-59 coaxial cable Polyethylene Mesh Wires Core WireCable RatingConnect this to the remote control unit RM-P2580 Connect to an AC 24 V SupplyCable Within 10 cmFasten the ceiling mount to the ceiling Installing the Ceiling MountAttach the Safety Wire Installing the Camera 20 ENSetup Procedure Setting Up the Camera Using RM-P258021Press and hold the Menu button for 3 seconds Press the SET button22 EN Menu Screen ConfigurationSetting Up the Camera Using RM-P2580 Private Mask Mode OFF Camera Function 2 Screen 24 ENCamera Function 1 Screen AF for IR Tilt LimitPAN Limit Auto ReturnCamera TITLE/ALARM Screen 26 ENCamera ALC/VIDEO Screen 28 EN Auto PAN/PATROL/TRACE ScreenPOS. Function SET Screen Factory Settings Screen 30 ENPrivate Mask Setup Manual PAN Limit Setup Select a camera. ARM-P2580 AinstructionsbMenu screen display. a pg , steps 2 to Set the position for the left limitSettings that override the Manual Pan Limit Basic operation of Manual Pan LimitOperations that override the Manual Pan Limit Right LimitCamera Title Setup Tele Numeric Enter Button keys button Wide buttonMenu Screen Space Blinking Character areaArea Display Setup Title Press the FAR buttonRepeat Steps 5 to Menu buttonArea Display Setup Direction EastWest Camera buttonCamera buttonNNumeric keyCamera NumberNENTER button Alarm Title SetupRepeat steps 5 to 7 for each alarm title Auto PAN Setup Set the Auto PAN Mode and Auto PAN SpeedSet the end position only when in the Return mode Select camera. ARM-P2580 AinstructionsbAuto Patrol Setup Change the Auto Patrol modeSet a patroll position Set the length of time a camera will stay in each positionAuto Trace Setup Set the patrol start positionCamera buttonNNumeric key Camera Number Nenter button To Start Auto Trace FunctionPosition Title Setup Select a preset position. a RM-P2580 AinstructionsbRepeat steps 5 to 7 for each title character Position buttonNNumeric key position numberNENTER buttonOther Troubleshooting42 EN Specifications External Dimensions Unit mmPan/Tilt Mechanism GeneralVictor Company of Japan, Limited