JVC GY-DV5000 manual Right Side Section Cont’d

2. CONTROLS, INDICATORS AND CONNECTORS

2-2 Right Side Section (Cont’d)

q w e

OPEN

EDITSEARCH

MONITOR

FILTER

13200K

25600K 1/8 ND

.3 5600K

.4 5600K 1/64 ND

SHUTTER	STATUS
						LCD	BRIGHT	DISPLAY
MENU
					AUDIO			PULL
					LEVEL	FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
						CH-1	CH-2
BACK L		STRETCH		MODE		AUDIO INPUT
				VTR		AUDIO SELECT
NORMAL		NORMAL				CH-1	CH-2
SPOT L		COMPRESS		CAM			AUTO
						MANUAL

POWER VTR

ONOFF

1Monitoring speaker

In the Camera mode, the input sound can be EE monitored. In the VTR mode, the speaker outputs the VTR playback sound. The sound to be output is selected with the MONITOR SELECT switch @.

●The sound level is adjusted with the MONITOR sound level button 1 on page 12. The sound from this speaker is not output if an earphone is plugged into the PHONES jack 5 on page 18. This speaker also outputs various warning sounds superimposed on other sound. ☞ See “Alarm Sounds” on page 92.

2LCD door

LCD monitor door.

The LCD monitor is located on the inner side of the door. The LCD monitor can be viewed when this door is opened. The door can be turned to change the orientation of the LCD monitor, and it can be rotated so that it can be accommodated in the main body of the camera.

☞ See page 40.

3LCD door lock and release knob

To open the LCD door, move this knob in the direction toward the rear section.

4[LCD BRIGHT +/–] LCD brightness +/– button

This button is for adjusting the brightness of the LCD monitor display.

●Pushing the button in the + direction makes the monitor brighter.

●Pushing the button in the – direction makes the monitor darker.

●Pushing the +/- buttons simultaneously returns the setting to the standard setting.

5[DISPLAY] Display button

This button is for turning the LCD monitor display ON/OFF and selecting the display mode.

When this button is pressed for a long time, the LCD monitor display is turned ON or OFF.

Each time this button is briefly pressed while the LCD

monitor display is turned on, the display mode changes as shown in the following.

Only image displayed → Characters shown enlarged

↑

Image and characters displayed ←

y	u		r	t
		LCD BRIGHT		DISPLAY
	AUDIO			PULL
	LEVEL		FRONT	OPEN
CH-1	CH-2		REAR
		CH-1	CH-2
		AUDIO INPUT
		AUDIO SELECT
		CH-1	CH-2
			AUTO
			MANUAL

i o

6[CH-1 AUDIO LEVEL] CH1 audio level control

Adjust the audio level of the CH1 audio channel with this control.

●To use this control, set the CH1 AUDIO SELECT switch 8 to “MANUAL”. This control works regardless of the setting of CH1 FRONT VR item on the AUDIO menu screen.

To use this control, set the AUDIO LEVEL CH-1 control switch on the front section (7on page 10) to the maximum

(10)position, or set the CH1 FRONT VR item on the AUDIO menu screen to “DISABLE”.

7[CH-2 AUDIO LEVEL] CH-2 audio level control

Adjust the audio level of the CH2 audio channel with this control.

●This control is valid only when the CH-2 AUDIO SELECT switch 9 is set to “MANUAL”.

8[CH-1 AUDIO SELECT] CH-1 audio selector switch

This switch is used to select the method for adjusting the audio level of the CH-1 audio channel.

AUTO : When audio at maximum volume is input, a limiter activates to suppress the audio level. The audio level does not increase when the input level is low.

MANUAL : The audio level can be adjusted with the CH-1 AUDIO LEVEL control 6or the AUDIO LEVEL CH-1 control 7 on page 10.

To use the AUDIO LEVEL CH-1 control on the front section, the CH1 FRONT VR item on the AUDIO menu screen should be set to “ENABLE”.

9[CH-2 AUDIO SELECT] CH-2 audio selector switch

This switch is used to select the method for adjusting the audio level of the CH-2 audio channel.

AUTO : The audio level is held at the reference level even when sounds greater than the reference level are input.

The audio level does not increase when the input level is low.

MANUAL : The audio level can be adjusted with the CH-2 AUDIO LEVEL control 7.

E-14