JVC GY-DV5000 Viewing the LCD Monitor, Opening the LCD monitor, Displaying on the LCD monitor

Page 40

5. PREPARATIONS

5-3 Viewing the LCD Monitor

The LCD monitor’s orientation, angle, and brightness, etc. can be changed.

LCD monitor

LCD lock and release knob

LCD door

Downward

Upward 180 90 degrees degrees

LCD monitor

OPEN

AUDIO

PULL

DISPLAY button

LCD BRIGHTDISPLAY

 

LEVEL

OPEN

 

 

FRONT

 

CH-1 CH-2 CH-1

REAR

 

CH-2

 

AUDIO INPUT

 

AUDIO SELECT

 

CH-1

CH-2

 

 

AUTO

 

 

MANUAL

 

LCD BRIGHT +/– button

LCD/VF (2/2) menu

––– LCD/VF(2/2) –––

TAPE REMAIN

ON

TC/UB

ON

AUDIO

ON

LCD COLOR

NORMAL

LCD PEAKINGS

NORMAL

PAGE BACK

 

Opening the LCD monitor

Slide the LCD lock and release knob toward the rear section to open the LCD monitor. Grasp the upper and lower edges of the LCD monitor to open it easily.

Changing the orientation and angle of the LCD monitor

With the LCD door in the open position, turn the LCD door. The LCD door can be turned 180 degrees upward and 90 degrees downward.

If the LCD door is turned 180 degrees upward and housed in the camera body, the LCD monitor can be viewed from outside while it remains housed in the camera body.

LCD monitor

Displaying on the LCD monitor

When the DISPLAY button is pressed for a long time, the display on the LCD monitor is switched between ON and OFF.

Each time the DISPLAY button is briefly pressed while the LCD monitor is used for display, the contents change as follows.

Image only Characters displayed magnified

Image and Characters

Adjusting the LCD monitor

Brightness of screen : Adjust with the LCD BRIGHT +/– button.

Colour saturation

: Adjust the LCD COLOR item on

 

the LCD/VF (2/2) menu.

Contrast of screen

: Adjust the LCD PEAKING item on

 

the LCD/VF (2/2) menu.

E-40

Image 40
Contents GY-DV5001MANUEL D’INSTRUCTIONS Instrucciones Istruzioni LWT0074-001C-HPort Cable Length DV signal input is possible with the GY-DV5001EThese instructions are for the GY-DV5000E and GY-DV5001E Rating plate serial number plate is on the top frame Main Features Main Features Connecting a Video Component with DV ConnectorAC Operation Battery Pack Operation Optional 11-11Precautions for Proper Use IntroductionRoutine and Periodical Maintenance Precautions for Use of Head Cleaning TapeHead cleaner Tape guides & rollers Time managementBattery Pack to be Used Use JVC’s videocassette tapes marked with the or SymbolVideocassette to be Used For recording and storing videotapes in the best conditionCharacteristic CCD Phenomena CondensationSmear and Blooming Moire or AliasingCONTROLS, Indicators and Connectors Front SectionAuto WHITE/ACCU Focus switch Filter Colour temperature conversion filter control knobLens mounting ring/Lens lock lever White BalanceRight Side Section Black Black stretch/black compression switch CAM Camera mode indicatorVTR VTR mode indicator Power Power ON/OFF switchRight Side Section Cont’d CH-1/CH-2 Audio Input CH-1/CH-2 audio input selector switch @ Monitor Select Audio monitor selector switch# Counter Counter display switch $ TC GENE. Time code generator setting switchMonitor OUT Monitor output connector BNC CH1/CH2 Line OUT CH1/CH2 line output connector RCAC OUT Y/C output connector 4-pin Left Side SectionTop Section Rear Section DV connector Battery holderBattery holder lock release knob Breaker Breaker buttonCamera mode Example of display VTR mode Example of displayIndications on the LCD Monitor and in the Viewfinder Status ScreensStatus Screens in the Camera Mode Indications on the LCD Monitor and in the Viewfinder Cont’d Status Screen in VTR Mode Magnified Status Indications on the LCD Monitor Cleaning Tape Head Cleaning RequiredNtsc Inhibit REC InhibitAuto White Balance Indication Camera mode only Safety Zone Indication Camera mode onlyMenu Setting Screen TOP Menu screen Camera modeZoom Lens Optional S14 x 7.3B12U1.5-Inch Viewfinder Optional VF-P115BBasic System Connections and Adjustments Basic SystemAttaching the Zoom Lens Attaching the ViewfinderPin Hole ViewfinderAttaching the Microphone Provided Attaching the Microphone Using KA-A50UAttaching the Microphone Optional Front mount clip Safety lever Lock lever Attaching the Tripod Base ProvidedTripod mounting holes Front base mountPower Supply Battery Pack Operation OptionalFlat shape type battery pack Anton-Bauer battery pack AC OperationBattery Pack Operation Optional Cont’d Using a Flat Shape Type Battery Pack optionalAttaching the Battery Pack Using an Anton-Bauer Battery PackDetaching the Battery Pack Operating Time with Battery Pack Battery Pack Continuous Operating Time at 25 ˚CRecharging SonyTurning the Power on Turning the Power OFFMode Operation PreparationsCassette Loading and Unloading Loading the CassetteREC Save VTROpen knob Unloading the CassetteCassette cover Eject button Adjusting the LCD monitor Viewing the LCD MonitorOpening the LCD monitor Changing the orientation and angle of the LCD monitorSetting, Displaying and Recording the Date and Time Setting the Date and TimeDial MenuSetting, Displaying and Recording the Date and Time Cont’d Clock Adjust menu screen Date Year/Month/DayDisplaying the Time and Date on the Screen Recording the Date and Time DataHow to charge Charging the Built-in BatteryAC outlet AA-P250 DC cable Camera Settings Screen Size 43/LETTER Mode SelectionFilter Suitable LocationViewfinder Adjustment External Monitor AdjustmentAdjust the position and angle of the viewfinder Colour video monitorBack Focus Adjustment Accu Focus can also be used in the above stepWhite Balance Adjustment Line Audio Input Signal SelectionMIC Auto mode is selected in the Full Auto shooting mode Recording Level AdjustmentUsing the audio input level control on the front section Monitor Select switch Monitoring Audio during RecordingShooting Operation Basic Recording OperationWhen it is required to unload the videocassette When the power should be turned offAbout the Quick REC Start Mode Tally lampSearching for Recorded Scenes Edit Search Edit SearchScreen indications during Edit Search Searching the tape in forward directionIf the Record-Standby Mode Continues Setting the time before the tape protection mode is EngagedHeader REC Function Header REC menu screen contentsDescription Executing the Header REC Function How to set the Header REC menu screenDuring Header REC Colour bar signal of the built-in signal generator Output switchRecording the Colour Bars Playback Mode Playback ProcedurePower switch Mode switch Display of time codeSearch Fast-Forward, RewindBlank Search Setting VTR indicatorOutputting CH-3, CH-4 Channel Audio Shutter dial Status button TOP Menu screenConnecting a Video Component with DV Connector Using External ComponentsDV connector DV cable VC-VDV204 4P-4P, VC-VDV206 4P- 6P Settings Operation ConnectionsDate and time data Data transmitted from the playback unit is recordedPresetting and Recording of Time Code TC GENE. switchTime Code Operation Displaying Time CodeZero-resetting the Time Code or User’s Bit Data Time code hour, min, sec, frameSet the TC Gene switch inside the cover on the side to TC Gene switchReproducing Time Codes Regen11-1Menu Screen Configuration Menu Screens11-2Setting Menu Screens Status buttonShutter STA Termenu dial Cursor Menu screenStoring Setting Values Reading Out a Menu Settings FileResetting the Menu Settings to the Factory Settings 11-3FILE Manage Menu Screen11-4TOP Menu Screen 11-5CAMERA Operation Menu Screen 11-6CAMERA Process Menu Screen 11-8SKIN Color Adjust Screen 11-7ADVANCED Process Screen11-9AUDIO Menu Screen 11-10 LCD/VF Menu Screen 11-10 LCD/VF Menu Screen Cont’d 11-11 TC/UB/CLOCK Menu Screen Header REC Menu Screen TIME/DATE Menu Screen Others Menu Screen Alarm VR BatteryType FrontFeatures of the Camera Section Setting procedureWHT.BAL switch Full-Time Auto White Balance FAWIris Brightness Adjustment Automatic adjustmentManual adjustment Temporary auto iris adjustmentAdjusting the Shutter Speed OperationShutter STA TER Set the Shutter item on the Camera Operation menu screenShooting the Screen Image on a Computer Monitor  Variable Scan V.SCANBand Video monitor Basic operationGain Sensitivity Adjustment Gain switchSwitch Position Factory-Set Gain Relationship between gain, iris and shutterSwitch Setup According to Illumination and Subject Automatic Setting ContentsHow to Use Skin Detail Setting the Color and Range of the Skin Detail FunctionDetection AreaStatus Using the Skin Detail FunctionDisplay Alarm Indications and Actions OthersScreen indications on the LCD monitor and in the Viewfinder Indication Condition RemedyBlinking Pattern Remaining Battery/Tape Error Code Error Details GY-DV5000 Operation RemedyTally lamp Alarm Indications and Actions Cont’d Camera to operate REC/ALARM lamp Battery lampAlarm Sound Viewfinder Warning LampsTroubleshooting Symptoms RemedyTape. See Precautions for Use of Head Cleaning Tape on TypeHour Meter Display Shutter dial Status buttonOthers 2/2 menu screen Accumulated drum running timeSpecifications Specifications Cont’d External Dimensions unit mmViewfinder VF-P115B, VF-P116 Power zoom lens YH16 ⋅ 7K12U, YH19 ⋅ 6.7K12U CanonGY-DV5000/GY-DV5001 DV Camcorder
Related manuals
Manual 49 pages 20.81 Kb