JVC GY-DV5000 Zero-resetting the Time Code or User’s Bit Data, Time code hour, min, sec, frame

10. TIME CODE OPERATION

TIME CODE PRESETTING PROCEDURE

OPEN

EDITSEARCH

MONITOR

FILTER

13200K

2 5600K / ND

.3 5600K

.4 5600K / ND

SHUTTER	STATUS
						LCD BRIGHT		DISPLAY
MENU
					AUDIO			PULL
					LEVEL
						FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
						CH-1	CH-2
BACK L		STRETCH		MODE		AUDIO INPUT
				VTR		AUDIO SELECT
NORMAL		NORMAL				CH-1	CH-2
SPOT L		COMPRESS		CAM		MANUAL
						AUTO

POWER	VTR
ON	OFF

SHUTTER dial STATUS button

TOP MENU screen

––– MENU –––
CAMERA OPERATION..
CAMERA PROCESS..
AUDIO..
LCD/VF..
TC/UB/CLOCK..
OTHERS..
FILE MANAGE..
MENU ALL RESET	CANCEL
EXIT

TC/UB/CLOCK menu screen

––– TC/UB/CLOCK –––

TC PRESET	00:00:00:00
	EXECUTE
TC CLEAR	CANCEL
UB PRESET	00 00 00 00
	EXECUTE
UB CLEAR	CANCEL
UB REC	ON
HEADER REC..
TIME/DATE..
PAGE BACK

Time code (hour, min, sec, frame)

PRESETTING USER’S BIT DATA

––– TC/UB/CLOCK –––

TC PRESET	00:00:00:00
	EXECUTE
TC CLEAR	CANCEL
UB PRESET	00 00 00 00
	EXECUTE
UB CLEAR	CANCEL
UB REC	ON
HEADER REC..
TIME/DATE..
PAGE BACK

Align the cursor with UB

The time code and user’s bit data are preset on the TC/UB/ CLOCK menu screen.

1. Display the TC/UB/CLOCK menu screen.

1Press the Status button for 1 second or more to display

the TOP MENU screen.

2Rotate the SHUTTER dial to align the cursor () with the TC/UB/CLOCK item, and then press the SHUTTER dial.

●The TC/UB/CLOCK menu screen appears.

2.Set the time code (hours, minutes, seconds, frames).

1 Rotate the SHUTTER dial to align the cursor () with TC PRESET, and then press the SHUTTER dial.

●The first digit of the time code blinks. The blinking digit is the one to be set.

2When the SHUTTER dial is pressed, the blinking digit

changes.

3When the SHUTTER dial is rotated, the value of the blinking digit changes.

When the SHUTTER dial is rotated upward, the value becomes higher. When rotated downward, the value

becomes smaller.

4Repeat the procedure described in 2 and 3 above to set the desired value for all digits.

5After setting the frame digit, press the SHUTTER dial to make EXECUTE blink. The setting values are confirmed when the SHUTTER dial is pressed again.

To cancel the setting, select CANCEL and press the SHUTTER dial.

3.When all the digits are set.

● Press the STATUS button to return to the normal screen or

● Rotate the SHUTTER dial to align the cursor () with the PAGE BACK item, and then press the SHUTTER dial to return to the TOP MENU screen.

The user’s bit data are preset with the UB PRESET item on the TC/UB/CLOCK menu screen.

The method for setting is the same as the method for setting the time code described above.

●The user’s bit can be specified using numerals or alphabetic letters from 0 to F for each digit.

●To record user’s bit data, set the UB REC item to ON.

CAUTION:

It is not possible to set all the digits of the user’s bit data to “F”. Reading of the data during playback will not be possible for an all-F setting.

Zero-resetting the Time Code or User’s Bit Data

This is performed with the CLEAR item on the TC/UB/CLOCK menu screen. (Performed separately for the time code and the user’s bit data.)

1Rotate the SHUTTER dial to align the cursor () with the CLEAR item, and then press the SHUTTER dial.

2 Rotate the SHUTTER dial to select EXECUTE as the setting value, and then press the SHUTTER dial.

E-65