JVC GY-DV5000 manual DV connector, Battery holder lock release knob, Breaker Breaker button

Page 19

2. CONTROLS, INDICATORS AND CONNECTORS

MEMO:

●The volume of the alarm sound is set with the ALARM VR LEVEL item on the OTHERS (2/2) menu screen.

●When using a stereotype jack and stereo sound should be output, the following setting should be performed.

Set the MONITOR SELECT switch to “MIX”.

Set the AUDIO MONITOR item on the AUDIO menu screen to STEREO.

6[DV] connector

Using a DV cable (optional), a digital video component with DV connector can be connected here.

This connector is used for input or output of the DV signal or to input the VTR control signal from a digital video component with DV connector.

To record the DV signal from this connector, set the unit to the VTR mode. (GY-DV5001 only)

(Press the MODE switch ^ on page 13 upward to turn on the VTR indicator.)

●Camera mode:

The DV compressed signal (IEEE1394) of the camera image is output.

●VTR mode:

•During playback, the tape playback DV compressed signal is output.

•The DV input signal from this connector can be recorded on tape. (GY-DV5001 only)

MEMO:

To receive FF/REW remote control signals from this connector, select the setting with the REM FF/REW MODE item on the OTHERS (1/2) menu screen.

7Battery holder

Mount Flat shape type battery pack here.

☞ See “Using Flat Shape Type Battery Pack” on page 34.

8Battery holder lock release knob

This knob is used to open the battery case cover. Press the knob while turning to open the cover.

9[BREAKER] Breaker button

The breaker trips when the power consumption exceeds the capacity.

If the breaker trips, confirm that there are no abnormalities and that the power consumption does not exceed the rated wattage. If no abnormalities are detected, press the BREAKER button before turning the power ON again to put the camera in the operating status.

If the unit still does not work normally, please consult the person in charge of professional video equipment at your nearest JVC-authorized service agent.

E-19

Image 19

Contents LWT0074-001C-H GY-DV5001MANUEL D’INSTRUCTIONS Instrucciones IstruzioniPort Cable Length DV signal input is possible with the GY-DV5001EThese instructions are for the GY-DV5000E and GY-DV5001E Rating plate serial number plate is on the top frame Main Features 11-11 Main FeaturesConnecting a Video Component with DV Connector AC Operation Battery Pack Operation OptionalIntroduction Precautions for Proper UseTime management Routine and Periodical MaintenancePrecautions for Use of Head Cleaning Tape Head cleaner Tape guides & rollersFor recording and storing videotapes in the best condition Battery Pack to be UsedUse JVC’s videocassette tapes marked with the or Symbol Videocassette to be UsedMoire or Aliasing Characteristic CCD PhenomenaCondensation Smear and BloomingFront Section CONTROLS, Indicators and ConnectorsWhite Balance Auto WHITE/ACCU Focus switchFilter Colour temperature conversion filter control knob Lens mounting ring/Lens lock leverRight Side Section Power Power ON/OFF switch Black Black stretch/black compression switchCAM Camera mode indicator VTR VTR mode indicatorRight Side Section Cont’d $ TC GENE. Time code generator setting switch CH-1/CH-2 Audio Input CH-1/CH-2 audio input selector switch@ Monitor Select Audio monitor selector switch # Counter Counter display switchLeft Side Section Monitor OUT Monitor output connector BNCCH1/CH2 Line OUT CH1/CH2 line output connector RCA C OUT Y/C output connector 4-pinTop Section Rear Section Breaker Breaker button DV connectorBattery holder Battery holder lock release knobStatus Screens Camera mode Example of displayVTR mode Example of display Indications on the LCD Monitor and in the ViewfinderStatus Screens in the Camera Mode Indications on the LCD Monitor and in the Viewfinder Cont’d Status Screen in VTR Mode Magnified Status Indications on the LCD Monitor REC Inhibit Cleaning TapeHead Cleaning Required Ntsc InhibitTOP Menu screen Camera mode Auto White Balance Indication Camera mode onlySafety Zone Indication Camera mode only Menu Setting ScreenS14 x 7.3B12U Zoom Lens OptionalVF-P115B 1.5-Inch Viewfinder OptionalBasic System Basic System Connections and AdjustmentsViewfinder Attaching the Zoom LensAttaching the Viewfinder Pin HoleAttaching the Microphone Provided Attaching the Microphone Using KA-A50UAttaching the Microphone Optional Front base mount Front mount clip Safety lever Lock leverAttaching the Tripod Base Provided Tripod mounting holesAC Operation Power SupplyBattery Pack Operation Optional Flat shape type battery pack Anton-Bauer battery packUsing a Flat Shape Type Battery Pack optional Battery Pack Operation Optional Cont’dAttaching the Battery Pack Using an Anton-Bauer Battery PackDetaching the Battery Pack Sony Operating Time with Battery PackBattery Pack Continuous Operating Time at 25 ˚C RechargingPreparations Turning the Power onTurning the Power OFF Mode OperationVTR Cassette Loading and UnloadingLoading the Cassette REC SaveOpen knob Unloading the CassetteCassette cover Eject button Changing the orientation and angle of the LCD monitor Adjusting the LCD monitorViewing the LCD Monitor Opening the LCD monitorMenu Setting, Displaying and Recording the Date and TimeSetting the Date and Time DialClock Adjust menu screen Date Year/Month/Day Setting, Displaying and Recording the Date and Time Cont’dRecording the Date and Time Data Displaying the Time and Date on the ScreenHow to charge Charging the Built-in BatteryAC outlet AA-P250 DC cable Suitable Location Camera SettingsScreen Size 43/LETTER Mode Selection FilterColour video monitor Viewfinder AdjustmentExternal Monitor Adjustment Adjust the position and angle of the viewfinderAccu Focus can also be used in the above step Back Focus AdjustmentWhite Balance Adjustment Line Audio Input Signal SelectionMIC Auto mode is selected in the Full Auto shooting mode Recording Level AdjustmentUsing the audio input level control on the front section Monitoring Audio during Recording Monitor Select switchBasic Recording Operation Shooting OperationTally lamp When it is required to unload the videocassetteWhen the power should be turned off About the Quick REC Start ModeSearching the tape in forward direction Searching for Recorded Scenes Edit SearchEdit Search Screen indications during Edit SearchSetting the time before the tape protection mode is Engaged If the Record-Standby Mode ContinuesHeader REC Function Header REC menu screen contentsDescription Executing the Header REC Function How to set the Header REC menu screenDuring Header REC Colour bar signal of the built-in signal generator Output switchRecording the Colour Bars Display of time code Playback ModePlayback Procedure Power switch Mode switchSearch Fast-Forward, RewindBlank Search Shutter dial Status button TOP Menu screen SettingVTR indicator Outputting CH-3, CH-4 Channel AudioConnecting a Video Component with DV Connector Using External ComponentsDV connector DV cable VC-VDV204 4P-4P, VC-VDV206 4P- 6P Data transmitted from the playback unit is recorded SettingsOperation Connections Date and time dataDisplaying Time Code Presetting and Recording of Time CodeTC GENE. switch Time Code OperationTime code hour, min, sec, frame Zero-resetting the Time Code or User’s Bit DataRegen Set the TC Gene switch inside the cover on the side toTC Gene switch Reproducing Time CodesMenu Screens 11-1Menu Screen ConfigurationTermenu dial Cursor Menu screen 11-2Setting Menu ScreensStatus button Shutter STA11-3FILE Manage Menu Screen Storing Setting ValuesReading Out a Menu Settings File Resetting the Menu Settings to the Factory Settings11-4TOP Menu Screen 11-5CAMERA Operation Menu Screen 11-6CAMERA Process Menu Screen 11-7ADVANCED Process Screen 11-8SKIN Color Adjust Screen11-9AUDIO Menu Screen 11-10 LCD/VF Menu Screen 11-10 LCD/VF Menu Screen Cont’d 11-11 TC/UB/CLOCK Menu Screen Header REC Menu Screen TIME/DATE Menu Screen Others Menu Screen Front Alarm VRBattery TypeFull-Time Auto White Balance FAW Features of the Camera SectionSetting procedure WHT.BAL switchTemporary auto iris adjustment Iris Brightness AdjustmentAutomatic adjustment Manual adjustmentSet the Shutter item on the Camera Operation menu screen Adjusting the Shutter SpeedOperation Shutter STA TERBasic operation Shooting the Screen Image on a Computer Monitor Variable Scan V.SCAN Band Video monitorRelationship between gain, iris and shutter Gain Sensitivity AdjustmentGain switch Switch Position Factory-Set GainAutomatic Setting Contents Switch Setup According to Illumination and SubjectArea How to Use Skin DetailSetting the Color and Range of the Skin Detail Function DetectionStatus Using the Skin Detail FunctionDisplay Indication Condition Remedy Alarm Indications and ActionsOthers Screen indications on the LCD monitor and in the ViewfinderBlinking Pattern Remaining Battery/Tape Error Code Error Details GY-DV5000 Operation RemedyTally lamp Viewfinder Warning Lamps Alarm Indications and Actions Cont’dCamera to operate REC/ALARM lamp Battery lamp Alarm SoundType TroubleshootingSymptoms Remedy Tape. See Precautions for Use of Head Cleaning Tape onAccumulated drum running time Hour Meter DisplayShutter dial Status button Others 2/2 menu screenSpecifications YH16 ⋅ 7K12U, YH19 ⋅ 6.7K12U Canon Specifications Cont’dExternal Dimensions unit mm Viewfinder VF-P115B, VF-P116 Power zoom lensGY-DV5000/GY-DV5001 DV Camcorder

Related manuals

Manual 49 pages 20.81 Kb