JVC GY-DV5000 manual Rear Section

2. CONTROLS, INDICATORS AND CONNECTORS

2-5 Rear Section

i

u

y

PHONES DVREAR AUDIO IN TALLY

t	q
	DC IN
	DC OUT

r e w

1[TALLY] Tally lamp

This lamp lights up when the GY-DV5000 enters the record mode. It blinks during the transition to the record mode.

●Use the BACK TALLY item on the OTHERS (2/2) menu screen to select whether or not the lamp should light and the lighting pattern.

☞ See “BACK TALLY” on page 81.

2 [REAR AUDIO IN] Audio input connector on the

rear section

Connect external audio equipment or a microphone to this

connector.

PUSH

LINE OUT

CH-1

Y/C OUT MONITOR OUT

o

CH-2

		No.	Signal
		1	GND
1	4	2	—
2	3	3	—
		4	+12V

4[DC OUT] DC output connector

Connector for power output to a wireless microphone transmitter, etc. The supply voltage is identical to the voltage supplied to the unit (DC 17 V max. 0.3 A).

● Set the FRONT/REAR AUDIO INPUT switch ! on page

15 in accordance with the connected equipment.

● To record the audio signal input through this connector,

set the CH-1 or CH-2 AUDIO INPUT switch 0 on page

15 to “REAR”. The audio from this connector is recorded

on the channel set to “REAR”.

No. Signal

1GND

41

32

(Surface profile)

No. Signal

1GND

2—

3—

4DC 12V (power through)

2 1 2 HOT

33 COLD

3[DC IN] DC input connector (XLR 4-pin)

Power input connector for 12 V DC. Connect to the optional AA-P250 power adapter. When a cable is connected here, the power supply from the battery pack is interrupted and the source is switched to the power supplied through this connector.

5[PHONES] Earphone jack

This is a stereo mini-jack for connecting an earphone for audio monitoring. Plug in an earphone or headphone with a 3.5 mm diameter plug. The earphone can also be used to monitor alarm tones in accordance with the circumstances. The sound from the monitoring speaker is interrupted when an earphone is connected here.

The audio channel to be output is selected with the AUDIO SELECT item on the AUDIO menu screen and MONITOR SELECT switch @ on page 15.

The audio output level is adjusted with the Audio monitor volume control 1 on page 12.

E-18