JVC GY-DV5000 manual Ntsc Inhibit, REC Inhibit, Copy Inhibit, LOW Voltage, Tape Near END, Tape END

Page 25

2. CONTROLS, INDICATORS AND CONNECTORS

■Alarm Message Display

Alarm display area		FAS
		–3dB
Alarm display area		FAW
		I
		SD
		B
	12.2V

01/02/03 AM01:23:45

●The following alarm messages are displayed while the Status (0, 1, 3) screen is shown in the Camera mode, or a status screen is shown in the VTR mode.

If an alarm is generated while the Status 2 screen is shown, the Status 0 screen returns to display the alarm.

●When an abnormality occurs in the VTR, a warning message with an error code is displayed.

Alarm Indication		Contents

NTSC INHIBIT		Displayed when attempt is made to play back a tape recorded with NTSC signal.
REC INHIBIT		Displayed when an unrecordable videocassette (the switch on the back of the
		cassette is set to “SAVE”) is loaded.

COPY INHIBIT		Displayed when attempt is made to record a copy-guarded signal.

LOW VOLTAGE		Displayed when remaining battery power becomes low.
TAPE NEAR END		Flashes when the remaining tape is 3 minutes or less in the shooting mode. It is
		not shown in the playback mode.

TAPE END		Displayed when the tape has reached its end.
INVALID TAPE!		Displayed when a data tape for PC use or DVC PRO cassette is used. The tape
		is ejected.
LP TAPE INVALID!		Displayed when attempt is made to playback a tape recorded in the LP mode.

NO TAPE		Displayed when no videocassette is inserted and the VTR trigger button is
		pressed.

NO DV SIGNAL (GY-DV5001 only)		Displayed when there is no input to the DV connector and recording is attempted.
COPY GUARD!		Displayed when attempt is made to play back a copy-guarded tape.

CLEANING TAPE!		Displayed when a head cleaning tape is inserted.
HEAD CLEANING REQUIRED!		Displayed when head is clogged. Head cleaning is necessary.

CLOSE CASSETTE COVER!		Displayed when operation is attempted while the cassette cover is open.
OPEN CASSETTE COVER!		Displayed when the cassette cover is closed during the eject operation.

VCR WARNING (Error code)		Displayed in case abnormalities occur in the VCR, or when condensation occurs
(Example)	7001	in the unit. For details, ☞ see page 91.
DRUM MOTOR FAILURE

E-25

Image 25

Contents LWT0074-001C-H GY-DV5001MANUEL D’INSTRUCTIONS Instrucciones IstruzioniPort Cable Length DV signal input is possible with the GY-DV5001EThese instructions are for the GY-DV5000E and GY-DV5001E Rating plate serial number plate is on the top frame Main Features Connecting a Video Component with DV Connector Main FeaturesAC Operation Battery Pack Operation Optional 11-11Introduction Precautions for Proper UsePrecautions for Use of Head Cleaning Tape Routine and Periodical MaintenanceHead cleaner Tape guides & rollers Time managementUse JVC’s videocassette tapes marked with the or Symbol Battery Pack to be UsedVideocassette to be Used For recording and storing videotapes in the best conditionCondensation Characteristic CCD PhenomenaSmear and Blooming Moire or AliasingFront Section CONTROLS, Indicators and ConnectorsFilter Colour temperature conversion filter control knob Auto WHITE/ACCU Focus switchLens mounting ring/Lens lock lever White BalanceRight Side Section CAM Camera mode indicator Black Black stretch/black compression switchVTR VTR mode indicator Power Power ON/OFF switchRight Side Section Cont’d @ Monitor Select Audio monitor selector switch CH-1/CH-2 Audio Input CH-1/CH-2 audio input selector switch# Counter Counter display switch $ TC GENE. Time code generator setting switchCH1/CH2 Line OUT CH1/CH2 line output connector RCA Monitor OUT Monitor output connector BNCC OUT Y/C output connector 4-pin Left Side SectionTop Section Rear Section Battery holder DV connectorBattery holder lock release knob Breaker Breaker buttonVTR mode Example of display Camera mode Example of displayIndications on the LCD Monitor and in the Viewfinder Status ScreensStatus Screens in the Camera Mode Indications on the LCD Monitor and in the Viewfinder Cont’d Status Screen in VTR Mode Magnified Status Indications on the LCD Monitor Head Cleaning Required Cleaning TapeNtsc Inhibit REC InhibitSafety Zone Indication Camera mode only Auto White Balance Indication Camera mode onlyMenu Setting Screen TOP Menu screen Camera modeS14 x 7.3B12U Zoom Lens OptionalVF-P115B 1.5-Inch Viewfinder OptionalBasic System Basic System Connections and AdjustmentsAttaching the Viewfinder Attaching the Zoom LensPin Hole ViewfinderAttaching the Microphone Provided Attaching the Microphone Using KA-A50UAttaching the Microphone Optional Attaching the Tripod Base Provided Front mount clip Safety lever Lock leverTripod mounting holes Front base mountBattery Pack Operation Optional Power SupplyFlat shape type battery pack Anton-Bauer battery pack AC OperationUsing a Flat Shape Type Battery Pack optional Battery Pack Operation Optional Cont’dAttaching the Battery Pack Using an Anton-Bauer Battery PackDetaching the Battery Pack Battery Pack Continuous Operating Time at 25 ˚C Operating Time with Battery PackRecharging SonyTurning the Power OFF Turning the Power onMode Operation PreparationsLoading the Cassette Cassette Loading and UnloadingREC Save VTROpen knob Unloading the CassetteCassette cover Eject button Viewing the LCD Monitor Adjusting the LCD monitorOpening the LCD monitor Changing the orientation and angle of the LCD monitorSetting the Date and Time Setting, Displaying and Recording the Date and TimeDial MenuClock Adjust menu screen Date Year/Month/Day Setting, Displaying and Recording the Date and Time Cont’dRecording the Date and Time Data Displaying the Time and Date on the ScreenHow to charge Charging the Built-in BatteryAC outlet AA-P250 DC cable Screen Size 43/LETTER Mode Selection Camera SettingsFilter Suitable LocationExternal Monitor Adjustment Viewfinder AdjustmentAdjust the position and angle of the viewfinder Colour video monitorAccu Focus can also be used in the above step Back Focus AdjustmentWhite Balance Adjustment Line Audio Input Signal SelectionMIC Auto mode is selected in the Full Auto shooting mode Recording Level AdjustmentUsing the audio input level control on the front section Monitoring Audio during Recording Monitor Select switchBasic Recording Operation Shooting OperationWhen the power should be turned off When it is required to unload the videocassetteAbout the Quick REC Start Mode Tally lampEdit Search Searching for Recorded Scenes Edit SearchScreen indications during Edit Search Searching the tape in forward directionSetting the time before the tape protection mode is Engaged If the Record-Standby Mode ContinuesHeader REC Function Header REC menu screen contentsDescription Executing the Header REC Function How to set the Header REC menu screenDuring Header REC Colour bar signal of the built-in signal generator Output switchRecording the Colour Bars Playback Procedure Playback ModePower switch Mode switch Display of time codeSearch Fast-Forward, RewindBlank Search VTR indicator SettingOutputting CH-3, CH-4 Channel Audio Shutter dial Status button TOP Menu screenConnecting a Video Component with DV Connector Using External ComponentsDV connector DV cable VC-VDV204 4P-4P, VC-VDV206 4P- 6P Operation Connections SettingsDate and time data Data transmitted from the playback unit is recordedTC GENE. switch Presetting and Recording of Time CodeTime Code Operation Displaying Time CodeTime code hour, min, sec, frame Zero-resetting the Time Code or User’s Bit DataTC Gene switch Set the TC Gene switch inside the cover on the side toReproducing Time Codes RegenMenu Screens 11-1Menu Screen ConfigurationStatus button 11-2Setting Menu ScreensShutter STA Termenu dial Cursor Menu screenReading Out a Menu Settings File Storing Setting ValuesResetting the Menu Settings to the Factory Settings 11-3FILE Manage Menu Screen11-4TOP Menu Screen 11-5CAMERA Operation Menu Screen 11-6CAMERA Process Menu Screen 11-7ADVANCED Process Screen 11-8SKIN Color Adjust Screen11-9AUDIO Menu Screen 11-10 LCD/VF Menu Screen 11-10 LCD/VF Menu Screen Cont’d 11-11 TC/UB/CLOCK Menu Screen Header REC Menu Screen TIME/DATE Menu Screen Others Menu Screen Battery Alarm VRType FrontSetting procedure Features of the Camera SectionWHT.BAL switch Full-Time Auto White Balance FAWAutomatic adjustment Iris Brightness AdjustmentManual adjustment Temporary auto iris adjustmentOperation Adjusting the Shutter SpeedShutter STA TER Set the Shutter item on the Camera Operation menu screen Variable Scan V.SCAN Shooting the Screen Image on a Computer MonitorBand Video monitor Basic operationGain switch Gain Sensitivity AdjustmentSwitch Position Factory-Set Gain Relationship between gain, iris and shutterAutomatic Setting Contents Switch Setup According to Illumination and SubjectSetting the Color and Range of the Skin Detail Function How to Use Skin DetailDetection AreaStatus Using the Skin Detail FunctionDisplay Others Alarm Indications and ActionsScreen indications on the LCD monitor and in the Viewfinder Indication Condition RemedyBlinking Pattern Remaining Battery/Tape Error Code Error Details GY-DV5000 Operation RemedyTally lamp Camera to operate REC/ALARM lamp Battery lamp Alarm Indications and Actions Cont’dAlarm Sound Viewfinder Warning LampsSymptoms Remedy TroubleshootingTape. See Precautions for Use of Head Cleaning Tape on TypeShutter dial Status button Hour Meter DisplayOthers 2/2 menu screen Accumulated drum running timeSpecifications External Dimensions unit mm Specifications Cont’dViewfinder VF-P115B, VF-P116 Power zoom lens YH16 ⋅ 7K12U, YH19 ⋅ 6.7K12U CanonGY-DV5000/GY-DV5001 DV Camcorder

Related manuals

Manual 49 pages 20.81 Kb