JVC GY-DV5000 manual Displaying the Time and Date on the Screen, Recording the Date and Time Data

5. PREPARATIONS

Displaying the Time and Date on the Screen

TC/UB/CLOCK menu screen

––– TC/UB/CLOCK –––

TC PRESET	00:00:00:00
	EXECUTE
TC CLEAR	CANCEL
UB PRESET	00 00 00 00
	EXECUTE
UB CLEAR	CANCEL
UB REC	ON
HEADER REC..
TIME/DATE..
PAGE BACK

TIME/DATE menu screen

––– TIME/DATE –––

DISPLAY	ON
DISPLAY MODE	BARS+CAM
DATE REC	OFF
DISPLAY STYLE	DATE+TIME
DATE STYLE	DD/MM/YY
TIME STYLE	24HOUR
SEC DISPLAY	ON
CLOCK ADJUST..
PAGE BACK

FAS –3dB

FAW

I

SD

B 12.2V 01/02/03 AM01:23:45

Date Time

Whether or not the time and date should be displayed on the screen and how to display them are set on the TIME/DATE menu screen.

1. Display the TIME/DATE menu screen.

1Select the TC/UB/CLOCK item on the TOP MENU screen.

2Select the TIME/DATE item on the TC/UB/CLOCK menu screen.

2.Set the TIME/DATE menu screen.

● DISPLAY item : Sets whether or not date and

time should be displayed. Set to ON to display the indications.

MEMO:

To display the date and time recorded on the tape, set the DATE REC item to OFF. When the DATE REC item is set to BARS or BARS+CAM, the date and time recorded on the tape are not displayed even if this item is set to ON.

●DISPLAY MODE item : Sets the video output mode in

which date and time should be displayed.

BARS : Displayed when the OUTPUT switch on the side section is set to BARS.

CAM: Displayed when the OUTPUT switch on the side section is set to CAM.

BARS + CAM : Date and time are always displayed.

●DISPLAY STYLE: Sets the style in which the date and time are displayed.

DATE + TIME:		Date and time are displayed.
DATE	:	Date only is displayed.
TIME	:	Time only is displayed.

■Display of date and time in the various operation modes.

In Camera mode : The date and time of the internal clock are displayed.

In VTR playback mode : The date and time recorded on the tape are displayed.

(Only when the DATE REC item is set to OFF.)

In VTR stop mode : The last read date and time values are displayed.

During DV signal input : The date and time from the DV

(GY-DV5001 only) connector are displayed.

Recording the Date and Time Data

TIME/DATE menu screen

––– TIME/DATE –––

DISPLAY	ON
DISPLAY MODE	BARS+CAM
DATE REC	BARS+CAM
DISPLAY STYLE	DATE+TIME
DATE STYLE	DD/MM/YY
TIME STYLE	24HOUR
SEC DISPLAY	ON
CLOCK ADJUST..
PAGE BACK

To record the date and time data during shooting, make the menu settings described below. When the DATE REC item on the TIME/DATE menu screen is set to “BARS” or “BARS + CAM”, the screen size will be fixed at an aspect ratio of 4:3.

■Setting the TIME/DATE menu

● DISPLAY item : Set to ON.

●DATE REC item : Select the video mode in which date

and time data should be recorded.

BARS : Date and time data are recorded only when colour bars are output.

BARS+CAM : Date and time data are recorded when colour bars and camera image are

OFF	output.
	: Date and time data are not recorded.

MEMO:

DATE REC cannot be set during recording.

E-43