JVC GY-DV5000 Playback Mode, Playback Procedure, Power switch Mode switch, Display of time code

8. PLAYBACK MODE

8-1 Playback Procedure

Recorded pictures can be viewed in the viewfinder, or on the LCD monitor, or on the monitor connected to the video output connector.

Operation cover

OPEN

EDITSEARCH

MONITOR

FILTER

13200K

25600K 1/8 ND

.3 5600K

.4 5600K 1/64 ND

SHUTTER STATUS

						LCD	BRIGHT	DISPLAY
MENU
					AUDIO			PULL
					LEVEL	FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
						CH-1	CH-2
BACK L		STRETCH		MODE		AUDIO INPUT
				VTR		AUDIO SELECT
NORMAL		NORMAL				CH-1	CH-2
SPOT L		COMPRESS		CAM			AUTO
						MANUAL

BLANK SEARCH REW STOP FF PLAY STILL

			Still button
		PLAY button
MODE	STOP button

POWER VTR

ON OFF

VTR

CAM

POWER switch

MODE switch

MEMO:

●The GY-DV5000 can play back the following three types of videocassettes:

•DV videocassette

•MiniDV videocassette

•DVCAM videocassette

●Tapes recorded in the LP mode cannot be played back.

1.Set the POWER switch to ON.

2.Set the unit to the VTR mode.

Press the MODE switch upward to turn on the VTR indicator.

●Playback is also possible in the Camera mode. Playback operation becomes possible when the STOP button is pressed to set the VTR operation mode indicator to indicate STOP.

3.Load the recorded videocassette correctly.

Slide the OPEN knob on the top section of the unit to open the cassette cover. Then insert the videocassette and close the cover.

●When the videocassette is loaded, the unit enters the Stop mode.

4.Open the operation cover on the upper section of the unit. Slide the operation cover to the side to open.

5.Press the PLAY button.

●Playback starts.

6.Press the STILL button to stop playback temporarily.

●The unit enters the still mode.

7.To re-start playback, press the PLAY button.

8.To stop playback or the still mode, press the STOP button.

MEMO:

●In the VTR mode, the camera image is not output on the LCD monitor, in the viewfinder or through the video output connector.

●The VTR mode is indicated on the LCD monitor and in the viewfinder. (Status screen)

00:00:00:00 20min

12.2V PLAY 01/02/03 AM––:––:––

VTR operation mode indication

●When the still picture mode or stop mode has continued for a while, the unit automatically switches to the tape protect mode.

Tape protect mode: Drum rotation is stopped in order to protect the tape.

●Noise may appear in the picture in the still mode.

●When the automatic tracking function is activated at the start of the playback mode, digital noise may appear in the playback image.

●This unit does not allow manual tracking adjustment.

●When playing back a tape that was recorded on another unit, digital noise may appear during playback.

●Following loading of the tape, the built-in head cleaner will emit a sound while operating. This does not indicate a malfunction.

●The data recorded for the date and time or time code on the tape can be shown on the screen. To enable or

disable the display is selected on the menu screen: Display of date and time: TIME/DATE menu screen

Display of time code: LCD/VF (2/2) menu screen

E-59