JVC GY-DV5000 manual Shooting Operation, Basic Recording Operation

7. SHOOTING OPERATION

7-1 Basic Recording Operation

3. OPEN knob

OPEN

EDITSEARCH

MONITOR

FILTER

13200K

2 5600K / ND

.3 5600K

.4 5600K / ND

SHUTTER	STATUS
						LCD BRIGHT		DISPLAY
MENU
					AUDIO			PULL
					LEVEL
						FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
						CH-1	CH-2
BACK L		STRETCH		MODE		AUDIO INPUT
NORMAL		NORMAL		VTR		CHAUDIO-1	CH-2
SPOT L		COMPRESS		CAM		MANUAL
						AUTO

POWER VTR

ON OFF

1. Set the POWER switch to ON.

● Power is supplied to the unit.

2. The CAM indicator lights up.

The GY-DV5000 is in the Camera mode when the CAM

indicator is on.

3. Slide the OPEN switch on the top section to open the

cassette cover.

4. Insert a videocassette into the cassette insertion slot.

● Ensure that the erasure-prevention switch on the back of

the cassette is set to REC and insert a videocassette

properly.

POWER VTR

ON OFF

1.

7, 8, 9,

6. Focusing ring

MODE

VTR

CAM

2.

EDITSEARCH

MONITOR

FILTER

13200K

2 5600K / ND

.3 5600K

.4 5600K / ND

SHUTTER	STATUS
MENU
					AUDIO
					LEVEL
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2
						CH
BACK L		STRETCH		MODE		A
NORMAL		NORMAL		VTR		CH
SPOT L		COMPRESS		CAM

POWER VTR

ON OFF

6. Zoom ring

7.8. 9. VTR trigger button

When the cassette is inserted, the tape is loaded and the

unit enters the record-standby mode.

● Slowly close the cassette cover.

MEMO:

●Use a standard DV videocassette or a MiniDV videocassette. (When a DVCAM cassette is used for recording, longer recording can be performed than the time indicated on the DVCAM cassette. For the recording time, regard the remaining tape indication displayed on the LCD or in the viewfinder as a guide.)

●Following loading of the cassette and when the POWER switch is turned ON/OFF, the built-in head cleaner will emit a sound while operating. This does not indicate a malfunction.

●After the cassette cover is closed, it takes about 10 seconds before the unit is ready for recording.

5.Adjust the camera section settings and the white balance.

☞See “Camera Settings” on page 45.

☞See “White Balance Adjustment” on page 48.

6.Point the camera at the subject and determine the angle of view and focus with the zoom lever and the focusing ring.

7.Start recording.

Press the VTR trigger button on the GY-DV5000 to start recording.

Once recording has started, the BACK TALLY lamp on the rear section of the unit and the tally lamp on the viewfinder light red, and the REC indication in the viewfinder lights green.

MEMO:

The lightening conditions of the BACK TALLY lamp on the rear section of the unit and the tally lamp on the viewfinder can be changed by setting the BACK TALLY and FRONT TALLY items on the OTHERS (2/2) menu screen.

8.TALLY lamp

OFF ZEBRA

ON	SKIN	AUTO
	AREA	WHITE
		ACCU
		FOCUS
	VTR	AUDIO
		LEVELE CH-1
		5

7.8. 9. VTR trigger button

E-52