Panasonic AG-TL950 appendix Safety Precautions, Information

Page 2

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This unit should be used with 120 V AC only.

CAUTION:

To prevent electric shocks and fire hazards, DO NOT use any other power source.

NOTE:

The rating plate (serial number plate) is on the rear of the unit.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guaran- tee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION

To assure continued compliance follow the attached installation instructions and do not make any unauthorized modificaitons.

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST

CONFORME À LA NORME NMB-003 DU CANADA.

ATTENTION

RISQUE D’ELECTROCUTION

NE PAS OUVRIR

ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER.

AUCUNE PIECE INTERIEURE N’EST

A REGLER PAR L’UTILISATEUR.

SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME.

Le symbole de l’éclair à l’intérieur d’un triangle équilatéral est destiné à alerter l’utilisateur sur la présence d’une “tension dangereuse” non isolée dans le boîtier du produit. Cette tension est suffisante pour provoquer l’électrocution de personnes.

Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à alerter l’utilisateur sur la présence d’opérations d’entretien importantes au sujet desquelles des renseignements se trouvent dans le manuel d’instructions.

*Ces symboles ne sont utilisés qu’aux Etats-Unis.

AVERTISSEMENT:

POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTROCUTION, NE PAS EXPOSER L’APPAREIL A L’HUMIDITE OU A LA PLUIE.

Ce magnétoscope ne doit être utilisé que sur du courant alternatif en 120 V.

ATTENTION:

Afin d’éviter tout resque d’incendie ou d’électrocution, ne pas utiliser d’autres sources d’alimentation électrique.

REMARQUE:

La plaque d’identification (numéro de série) se trouve sur le panneau arrière de l’appareil.

WARNING:

The battery used in the AG-TL950P must be replaced by a PANASONIC authorized service dealer only.

AVERTISSEMENT:

La pile utilisée dans l’AG-TL950P ne devra être remplacée que par un service après-vente PANASONIC agréé.

CAUTION:

Do not install or place this unit in a bookcase, built-in cabinet or in another confined space in order to keep well ventilation condition. Ensure that curtains and any other materials do not obstruct the ventilation condition to prevent risk of electric shock or fire hazard due to overheating.

ATTENTION:

Ne pas installer cet appareil dans une bibliothèque, un meuble fermé ou autres endroits renfermés. Installer l’appareil dans un endroit bien ventilé. S’assurer qu’aucun rideau ou autre matériel ne bouche la ventilation du lecteur de cassetie vidéo afin de prévenir tout risque de chocs électriques ou de dangers d’incendie dû au surchauffement.

2

Image 2
Contents Operating VQT9726Safety Precautions InformationTime MODE+/- button Lock indicator Lock buttonOperation Lock Page Contents Major Features IntroductionIntroduction Periodical MaintenancePrecautions Regarding S-VHS ET Recording Inspection procedureDaily Inspection Erasure prevention tabControls and Connectors Front PanelControls and Connectors Display Rear Panel Series REC OUT series recording signal output terminal COM common ground terminalConnecting to a Camera ConnectionsSystem Using Sequential Switcher ConnectionsConnecting the Rear Panel Input/Output Terminal Connections On-Screen Display ON-SCREEN/MENU SwitchesDisplay items On Screen Mode screen Changing the on-screen display brightnessMain Menu Display ON-SCREEN/MENU SwitchesContents of the main menu items Set to OFF Date and Time SettingTime setting item and the hour digit blinks During Daylight Savings time Time setting for 29 seconds or lessHour Meter Display Standard timeWith the second item Alarm Input/Power Loss Data DisplayResetting alarm input/power loss failure data Menu Switch Setting Contents of Menu Switches Screens Items Set values Screens Set values FunctionDuration SEC Mode StopREC T-MODE ContinueAuto operate on PreparationCassette Loading/Unloading Auto playHigh-Density Recording Recording/Playback Speed Mode SelectionPreparation 120Recording Switch Setting During RecordingMenu switch settings ConnectionRecording Recording Basic OperationPreparation Timer RecordingTimer Recording Program Setting To program timer recording at another time or day RPT Timer recording is executed on the specified dayOFF Programmed timer recording is not executed Press the Shift 7 button so that the next settingShift 7 button Shift f button Programming timer recording for more than 24 hoursTimer button Menu button Stop time Start time Day of the week Program Timer screen Recording speedOn Enabled OFF Disabled Holiday SET screen Holiday Timer Recording SettingT + Timer button Menu button SET button SET + button MonthDayTo stop timer programming before finishing Canceling/Changing Timer Recording ProgramTo modify timer programs To cancel preset timer programsIf programmed data overlap During timer recordingTimer recording If no cassette is loaded48H/NORMAL Alarm RecordingTimelapse Alarm Recording Alarm signal input Setting the on-screen brightness and display items Tape END ModeSetting the alarm buzzer Setting the HDRSensor Recording When set to AL/SENSOR, both alarm recordingAlarm signals are input Sensor recording will be performedOperation Series RecordingConnections Repeat for all connected VCRsCounter value Connection SettingNon-stop continuous series recording Second VCR First VCRRepeat Recording ALARM/SENSOR ModeWhen the Auto REC Check menu switch is set to on Operation of the automatic recording check functionVCR control signal ground signal Recording with External VCR Activation SignalAlarm search/date and time search SRI/EXT Mode screenVTR Mode screen How to Restore Recording After Power FailureExternal Timer Recording Tape End BuzzerPlayback Menu switch settingPreparation To stop playbackStill playback Playback and SPECIAL-EFFECTS PlaybackSpecial-Effects Playback Field advance playbackREW button Shuttle search reverse and fast-forward playbackFast-forward shuttle search Reverse shuttle search Play buttonAlarm search setting screen Alarm Search/Date and Time SearchAlarm search Alarm numberDate/Time Search mode is canceled Alarm scanIs located, the Stop mode is engaged Date/time searchCounter Memory Function CNT Reset button Display buttonRepeat Playback Auto rewindTracking/V. Lock Adjustment Lock +/- buttons Tracking +/- buttonsError Contents VCR operation Measures TroubleshootingError Indications Troubleshooting No Error IndicationAppendixes Tape Reel Counter/Tape Remaining Time TableAppendixes Terminals Signal levels Remarks 2H/6H recordingRecording signal input Rear Panel’s Inputs/OutputsTime/date SpecificationsAlarm Video SystemWestern Zone Office Security Systems GroupEastern Zone Office Industrial Medical Group

AG-TL950 specifications

The Panasonic AG-TL950 is a professional-grade broadcast monitor designed to meet the rigorous standards of the film and television industry. This monitor is particularly geared towards production environments that require precision, reliability, and high-quality imaging. With its rich feature set and advanced technologies, the AG-TL950 is a powerful tool for any broadcast or film professional.

One of the standout features of the AG-TL950 is its high-resolution display. The monitor supports 4K resolution, providing crystal-clear image quality and allowing users to see fine details that are critical during production and editing processes. This high resolution, combined with excellent color accuracy, ensures that content creators can trust the colors they are seeing on-screen, which is essential for color grading and post-production work.

The AG-TL950 also employs advanced HDR (High Dynamic Range) technology, which enhances the monitor’s contrast and color range, allowing for a more realistic and immersive viewing experience. This makes it particularly valuable for filmmakers and production teams working on projects that require adherence to modern HDR standards.

Connectivity is another strong suit of the AG-TL950. The monitor is equipped with a variety of input options, including 12G-SDI, HDMI, and both analog and digital audio inputs. This flexibility allows it to integrate smoothly into existing production workflows and ensures compatibility with a wide range of video sources.

In addition to its impressive visual capabilities, the AG-TL950 includes essential features for professional monitoring. It offers waveform and vector scope displays, allowing users to analyze and adjust their signals accurately. Furthermore, the monitor has customizable monitoring options, enabling users to set up to 16 user-defined presets for quick access to their most-used settings.

The design of the AG-TL950 reflects its professional focus, with a robust build quality that speaks to its reliability in dynamic production environments. Its lightweight design makes it easy to transport, while the wide viewing angles ensure that multiple crew members can view the monitor clearly from different positions.

In conclusion, the Panasonic AG-TL950 monitor integrates advanced display technology, versatile connectivity, and user-friendly monitoring features. It stands out as an essential tool for professional filmmakers and broadcast engineers, enabling them to create high-quality visuals with accuracy and confidence.