Panasonic AG-TL950 appendix Hour Meter Display, During Daylight Savings time, Standard time

Page 20

4 ON-SCREEN/MENU SWITCHES

4-3 Date and Time Setting

Summer Time Compensation

When setting the time, make sure the <DAYLIGHT SAVINGS> item is set to “OFF”. When this unit is shipped, this item is set to “OFF”.

During DAYLIGHT SAVINGS time

1Set the time with a one-hour delay.

2After setting the time, set the <DAYLIGHT SAVINGS> item to “ON”.

• The set time advances one hour.

3At the end of the daylight savings time season, set the <DAYLIGHT SAVINGS> item to “OFF”.

The standard time instead of <DAYLIGHT SAVINGS> is displayed.

Time setting for 29 seconds or less

When the seconds value is 29 or less, you can reset it to 00 by pressing the [CNT RESET] button while pressing the [RESET/ CANCEL] button.

For 30 or more, the seconds value is reset to 00 and the minutes value is increased by one.

Standard time

1Set the clock to the actual time.

2When daylight savings time start, set the <DAYLIGHT SAVINGS> item to “ON”.

• The time advances one hour on the display.

Notes:

If the power plug has been disconnected from an AC outlet for a long time, make sure the set time is correct before using the unit. (Clock time may be affected by environmental factors.)

When the built-in backup battery capacity is low, the error indication E-10 appears on the display. Contact your local Panasonic dealer to replace the built-in battery.

4-4 Hour Meter Display

Drum rotation time is displayed on the monitor’s screen and the VCR's display in the form of an hour meter. Use this data to schedule maintenance.

 

Main menu screen

VCR's display

 

* * * * * * * * * [ MENU ] * * * * * * * * *

 

 

* * * T I ME AD J US T * * * * * * * * * *

 

 

* * * ONSCREEN / F . D I SP * MODE *

 

 

* * * V I DEO / V TR * MODE * * * * * * *

 

 

* * * SR I / EX T * MODE * * * * * * * * *

 

 

* * * ALARM / SENSOR * MODE * * ON

HOUR

 

* * * BUZ Z ER / I N * OUT * * * * * * ON

 

* * * PROGRAM * T I MER * * * * * * * *

 

 

* * * HOL I DAY * SE T

* * * * * * * * *

 

 

* * *

 

 

 

 

 

 

HOUR

ME T ER *

* * * * * * * ON

 

 

* * *

 

 

 

 

 

ALARM *RECALL/POWER*LOSSON

 

 

* 4 F

 

* * * * *

 

 

 

 

[SET +/–] button

 

 

 

Hour meter screen

 

 

* * * * * * [ HOUR * ME T ER ] * * * * * *

 

 

* * * * * * * * * * * * * * * * * * * * * * * *

 

 

 

* * * 0 0 0 0 4 7 H * * * * * * * * *

 

 

* * * * * * * * * * * * * * * * * * * * * * * *

 

 

* * * * * * * * * * * * * * * * * * * * * * * *

 

 

 

 

* * * * * * * * * * * * * * * * * * * * * * * *

 

 

* * * * * * * * * * * * * * * * * * * * * * * *

 

 

* * * * * * * * * * * * * * * * * * * * * * * *

 

 

* * * * * * * * * * * * * * * * * * * * * * * *

 

 

* * * * * * * * * * * * * * * * * * * * * OF F

 

 

* * * * * * * * * * * * * * * * * * * * * ** *

 

 

* 4 F I N

* ENU * * * * * * * * * *

 

 

Operation

1Turn on the VCR and monitor.

2Press the [MENU] button to display the main menu.

3Press the [SHIFT 7] button to set the cursor on the <HOUR METER> on the main menu.

4Press the [SET +/–] button to show the hour meter (drum rotating time) on the monitor.

5Press the [MENU] button twice to restore the normal screen.

20

Image 20
Contents Operating VQT9726Safety Precautions InformationTime MODE+/- button Lock indicator Lock buttonOperation Lock Page Contents Major Features IntroductionIntroduction Periodical MaintenancePrecautions Inspection procedure Daily InspectionRegarding S-VHS ET Recording Erasure prevention tabControls and Connectors Front PanelControls and Connectors Display Rear Panel Series REC OUT series recording signal output terminal COM common ground terminalConnecting to a Camera ConnectionsSystem Using Sequential Switcher ConnectionsConnecting the Rear Panel Input/Output Terminal Connections ON-SCREEN/MENU Switches Display items On Screen Mode screenOn-Screen Display Changing the on-screen display brightnessMain Menu Display ON-SCREEN/MENU SwitchesContents of the main menu items Set to OFF Date and Time SettingTime setting item and the hour digit blinks Time setting for 29 seconds or less Hour Meter DisplayDuring Daylight Savings time Standard timeWith the second item Alarm Input/Power Loss Data DisplayResetting alarm input/power loss failure data Menu Switch Setting Contents of Menu Switches Screens Items Set values Screens Set values FunctionMode Stop REC T-MODEDuration SEC ContinuePreparation Cassette Loading/UnloadingAuto operate on Auto playRecording/Playback Speed Mode Selection PreparationHigh-Density Recording 120Switch Setting During Recording Menu switch settingsRecording ConnectionRecording Recording Basic OperationPreparation Timer RecordingTimer Recording Program Setting RPT Timer recording is executed on the specified day OFF Programmed timer recording is not executedTo program timer recording at another time or day Press the Shift 7 button so that the next settingShift 7 button Shift f button Programming timer recording for more than 24 hoursTimer button Menu button Stop time Start time Day of the week Program Timer screen Recording speedOn Enabled OFF Disabled Holiday Timer Recording Setting T + Timer button Menu button SET button SET + buttonHoliday SET screen MonthDayCanceling/Changing Timer Recording Program To modify timer programsTo stop timer programming before finishing To cancel preset timer programsDuring timer recording Timer recordingIf programmed data overlap If no cassette is loaded48H/NORMAL Alarm RecordingTimelapse Alarm Recording Alarm signal input Tape END Mode Setting the alarm buzzerSetting the on-screen brightness and display items Setting the HDRWhen set to AL/SENSOR, both alarm recording Alarm signals are inputSensor Recording Sensor recording will be performedSeries Recording ConnectionsOperation Repeat for all connected VCRsConnection Setting Non-stop continuous series recordingCounter value Second VCR First VCRALARM/SENSOR Mode When the Auto REC Check menu switch is set to onRepeat Recording Operation of the automatic recording check functionRecording with External VCR Activation Signal Alarm search/date and time searchVCR control signal ground signal SRI/EXT Mode screenHow to Restore Recording After Power Failure External Timer RecordingVTR Mode screen Tape End BuzzerMenu switch setting PreparationPlayback To stop playbackPlayback and SPECIAL-EFFECTS Playback Special-Effects PlaybackStill playback Field advance playbackShuttle search reverse and fast-forward playback Fast-forward shuttle search Reverse shuttle searchREW button Play buttonAlarm Search/Date and Time Search Alarm searchAlarm search setting screen Alarm numberAlarm scan Is located, the Stop mode is engagedDate/Time Search mode is canceled Date/time searchCNT Reset button Display button Repeat PlaybackCounter Memory Function Auto rewindTracking/V. Lock Adjustment Lock +/- buttons Tracking +/- buttonsError Contents VCR operation Measures TroubleshootingError Indications Troubleshooting No Error IndicationAppendixes Tape Reel Counter/Tape Remaining Time TableTerminals Signal levels Remarks 2H/6H recording Recording signal inputAppendixes Rear Panel’s Inputs/OutputsSpecifications AlarmTime/date Video SystemSecurity Systems Group Eastern Zone OfficeWestern Zone Office Industrial Medical Group

AG-TL950 specifications

The Panasonic AG-TL950 is a professional-grade broadcast monitor designed to meet the rigorous standards of the film and television industry. This monitor is particularly geared towards production environments that require precision, reliability, and high-quality imaging. With its rich feature set and advanced technologies, the AG-TL950 is a powerful tool for any broadcast or film professional.

One of the standout features of the AG-TL950 is its high-resolution display. The monitor supports 4K resolution, providing crystal-clear image quality and allowing users to see fine details that are critical during production and editing processes. This high resolution, combined with excellent color accuracy, ensures that content creators can trust the colors they are seeing on-screen, which is essential for color grading and post-production work.

The AG-TL950 also employs advanced HDR (High Dynamic Range) technology, which enhances the monitor’s contrast and color range, allowing for a more realistic and immersive viewing experience. This makes it particularly valuable for filmmakers and production teams working on projects that require adherence to modern HDR standards.

Connectivity is another strong suit of the AG-TL950. The monitor is equipped with a variety of input options, including 12G-SDI, HDMI, and both analog and digital audio inputs. This flexibility allows it to integrate smoothly into existing production workflows and ensures compatibility with a wide range of video sources.

In addition to its impressive visual capabilities, the AG-TL950 includes essential features for professional monitoring. It offers waveform and vector scope displays, allowing users to analyze and adjust their signals accurately. Furthermore, the monitor has customizable monitoring options, enabling users to set up to 16 user-defined presets for quick access to their most-used settings.

The design of the AG-TL950 reflects its professional focus, with a robust build quality that speaks to its reliability in dynamic production environments. Its lightweight design makes it easy to transport, while the wide viewing angles ensure that multiple crew members can view the monitor clearly from different positions.

In conclusion, the Panasonic AG-TL950 monitor integrates advanced display technology, versatile connectivity, and user-friendly monitoring features. It stands out as an essential tool for professional filmmakers and broadcast engineers, enabling them to create high-quality visuals with accuracy and confidence.