Panasonic AG-TL950 appendix Alarm scan, Date/time search, Is located, the Stop mode is engaged

Page 50

7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

Alarm scan screen

ALARM : SCAN 0 1 * * * * * * * * * * * *

0 0 H 0 0M0 1 S * * FR I * * * * * * * * * *

AL – 0 5 6 * BL P L – 0 4 * AUTO * * * * *

* ZControlOOMONUMor. *reel* * *counter* M. * * * * * * *

* MACR * * T E L E * * * * A . * * * * * * *

* DAT EEHEURE * * * * * * * * * * * * *

* DURE * * BANDE * * * T 4 5 * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* 4F I N DE * MENU * * * * * * * * * * *

Alarm scan

The section around the start of each alarm recording is played back for about 5 seconds.

*Playback may start a few seconds after the actual start of the alarm recording.

*If the interval between alarm recordings is short, the tape may play back continuously for 5 seconds or more.

*Sound is not output.

1Press the [SEARCH] button twice in the Stop mode.

[The Alarm Scan mode is engaged and the “ALARM SCAN” indication is shown on the monitor screen. The “ALSC” indication is shown in the display’s record/playback speed mode indication section.

*To release the Alarm Scan mode, press the [SEARCH] button twice.

2Press the [FF] or [REW] button.

[The VCR fast-forwards or rewinds the tape from the current position and the section around the start of each alarm recording is played back for about 5 seconds.

3Press the [PLAY] button when you want to start playback. [Normal playback starts and the Alarm Scan mode is canceled.

•To cancel alarm search or alarm scan, press the [STOP] button, [PLAY] button, [REV PLAY] button or the [REW]/[FF] button (whichever is opposite to the current tape running direction).

•When the end or beginning of the tape is reached during alarm search or alarm scan, the mode is canceled and the Stop mode is engaged.

Date/time search setting screen

“Day” setting

 

 

 

“Time” setting

 

 

 

 

 

 

 

 

 

 

TDASRHS 0 1 D 0 0 H * * * * * * * * * * *

0 0 H 0 0M0 1 S * * FR I * * * * * * * * * *

–– – – – 6 – – : – – – 0 4 * AUTO * * * * *

* ZOOMONUM . * * * * * M. * * * * * * *

* MACR * * T E L E * * * * A . * * * * * * *

* SearchDAT EEHdataEUREduring* * * * * *tape* * * * * * *

* DURE * * BANDE * * * T 4 5 * * * * * *

running (month, day,

* * * * * * * * * * * * * * * * * * * * * * * *

hour, minute)

* * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* 4F I N DE * MENU * * * * * * * * * * *

VCR’s display

“Day” setting “Hour” setting

Date/time search

A section recorded at a specified date and time is searched and the Stop mode is engaged.

1Press the [SEARCH] button three times in the Stop mode.

[The Date/Time Search mode is engaged and the date/time search setting screen is shown on the monitor.

“td 0100” is shown on the VCR’s display.

*To cancel the Date/Time Search mode, press the [SEARCH] button once.

2Press the [SET +] or [SET –] button to set the “date” you want to search (01 - 31).

3Press the [SHIFT f] button so that “hour” blinks.

4Press the [SET +/–] button to set the “hour” you want to search (00 - 23).

5 Press the [FF] button or [REW] button.

[The VCR fast-forwards or rewinds the tape from the current

position to search the specified date and time. When the recording

TDASRF S 1 2 D 1 9 H * * * * * * * * * * *

0 0 H 0 0M0 1 S * * FR I * * * * * * * * * *

1 0 – 1 0 6 1 5 : 3 0 – 0 4 * AUTO * * * * *

* ZOOMONUM . * * * * * M. * * * * * * *

* MACR * * T E L E * * * * A . * * * * * * *

* DAT EEHEURE * * * * * * * * * * * * *

* DURE * * BANDE * * * T 4 5 * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* 4F I N DE * MENU * * * * * * * * * * *

Set value 19:00 on 12

Search data during tape running (15:30 on Oct. 10)

is located, the Stop mode is engaged.

The Date/Time Search mode is canceled.

• During date/time search, the month, day, hour and minute which are

being searched are shown on-screen.

• If the specified date and time cannot be found and the tape ends, the

Date/Time Search mode is canceled and the Stop mode is engaged.

Notes:

•If the specified date and time is near the start of an alarm recording, the date/time search may not be successful.

•If the specified date/time is the same as the timer-recording start time, the VCR may not operate correctly.

•Date/time search cannot be executed if no date and time are available in the search direction.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Operating VQT9726Safety Precautions InformationTime MODE+/- button Lock indicator Lock buttonOperation Lock Page Contents Major Features IntroductionIntroduction Periodical MaintenancePrecautions Regarding S-VHS ET Recording Inspection procedureDaily Inspection Erasure prevention tabControls and Connectors Front PanelControls and Connectors Display Rear Panel Series REC OUT series recording signal output terminal COM common ground terminalConnecting to a Camera ConnectionsSystem Using Sequential Switcher ConnectionsConnecting the Rear Panel Input/Output Terminal Connections On-Screen Display ON-SCREEN/MENU SwitchesDisplay items On Screen Mode screen Changing the on-screen display brightnessMain Menu Display ON-SCREEN/MENU SwitchesContents of the main menu items Set to OFF Date and Time SettingTime setting item and the hour digit blinks During Daylight Savings time Time setting for 29 seconds or lessHour Meter Display Standard timeWith the second item Alarm Input/Power Loss Data DisplayResetting alarm input/power loss failure data Menu Switch Setting Contents of Menu Switches Screens Items Set values Screens Set values FunctionDuration SEC Mode StopREC T-MODE ContinueAuto operate on PreparationCassette Loading/Unloading Auto playHigh-Density Recording Recording/Playback Speed Mode SelectionPreparation 120Recording Switch Setting During RecordingMenu switch settings ConnectionRecording Recording Basic OperationPreparation Timer RecordingTimer Recording Program Setting To program timer recording at another time or day RPT Timer recording is executed on the specified dayOFF Programmed timer recording is not executed Press the Shift 7 button so that the next settingShift 7 button Shift f button Programming timer recording for more than 24 hoursTimer button Menu button Stop time Start time Day of the week Program Timer screen Recording speedOn Enabled OFF Disabled Holiday SET screen Holiday Timer Recording SettingT + Timer button Menu button SET button SET + button MonthDayTo stop timer programming before finishing Canceling/Changing Timer Recording ProgramTo modify timer programs To cancel preset timer programsIf programmed data overlap During timer recordingTimer recording If no cassette is loaded48H/NORMAL Alarm RecordingTimelapse Alarm Recording Alarm signal input Setting the on-screen brightness and display items Tape END ModeSetting the alarm buzzer Setting the HDRSensor Recording When set to AL/SENSOR, both alarm recordingAlarm signals are input Sensor recording will be performedOperation Series RecordingConnections Repeat for all connected VCRsCounter value Connection SettingNon-stop continuous series recording Second VCR First VCRRepeat Recording ALARM/SENSOR ModeWhen the Auto REC Check menu switch is set to on Operation of the automatic recording check functionVCR control signal ground signal Recording with External VCR Activation SignalAlarm search/date and time search SRI/EXT Mode screenVTR Mode screen How to Restore Recording After Power FailureExternal Timer Recording Tape End BuzzerPlayback Menu switch settingPreparation To stop playbackStill playback Playback and SPECIAL-EFFECTS PlaybackSpecial-Effects Playback Field advance playbackREW button Shuttle search reverse and fast-forward playbackFast-forward shuttle search Reverse shuttle search Play buttonAlarm search setting screen Alarm Search/Date and Time SearchAlarm search Alarm numberDate/Time Search mode is canceled Alarm scanIs located, the Stop mode is engaged Date/time searchCounter Memory Function CNT Reset button Display buttonRepeat Playback Auto rewindTracking/V. Lock Adjustment Lock +/- buttons Tracking +/- buttonsError Contents VCR operation Measures TroubleshootingError Indications Troubleshooting No Error IndicationAppendixes Tape Reel Counter/Tape Remaining Time TableAppendixes Terminals Signal levels Remarks 2H/6H recordingRecording signal input Rear Panel’s Inputs/OutputsTime/date SpecificationsAlarm Video SystemWestern Zone Office Security Systems GroupEastern Zone Office Industrial Medical Group

AG-TL950 specifications

The Panasonic AG-TL950 is a professional-grade broadcast monitor designed to meet the rigorous standards of the film and television industry. This monitor is particularly geared towards production environments that require precision, reliability, and high-quality imaging. With its rich feature set and advanced technologies, the AG-TL950 is a powerful tool for any broadcast or film professional.

One of the standout features of the AG-TL950 is its high-resolution display. The monitor supports 4K resolution, providing crystal-clear image quality and allowing users to see fine details that are critical during production and editing processes. This high resolution, combined with excellent color accuracy, ensures that content creators can trust the colors they are seeing on-screen, which is essential for color grading and post-production work.

The AG-TL950 also employs advanced HDR (High Dynamic Range) technology, which enhances the monitor’s contrast and color range, allowing for a more realistic and immersive viewing experience. This makes it particularly valuable for filmmakers and production teams working on projects that require adherence to modern HDR standards.

Connectivity is another strong suit of the AG-TL950. The monitor is equipped with a variety of input options, including 12G-SDI, HDMI, and both analog and digital audio inputs. This flexibility allows it to integrate smoothly into existing production workflows and ensures compatibility with a wide range of video sources.

In addition to its impressive visual capabilities, the AG-TL950 includes essential features for professional monitoring. It offers waveform and vector scope displays, allowing users to analyze and adjust their signals accurately. Furthermore, the monitor has customizable monitoring options, enabling users to set up to 16 user-defined presets for quick access to their most-used settings.

The design of the AG-TL950 reflects its professional focus, with a robust build quality that speaks to its reliability in dynamic production environments. Its lightweight design makes it easy to transport, while the wide viewing angles ensure that multiple crew members can view the monitor clearly from different positions.

In conclusion, the Panasonic AG-TL950 monitor integrates advanced display technology, versatile connectivity, and user-friendly monitoring features. It stands out as an essential tool for professional filmmakers and broadcast engineers, enabling them to create high-quality visuals with accuracy and confidence.
Top Page Image Contents