Panasonic AG-TL950 appendix Recording Basic Operation

Page 30

6 RECORDING

6-2 Recording Basic Operation

[STOP] button

[REC REVIEW] button

[REC] button

 

 

 

REC

POWER

STOP

EJECT

 

 

 

POWER

 

 

 

 

 

HDR

RESET/

 

REC REVIEW REC

 

 

 

 

 

 

 

 

 

 

 

CANCEL

ON SCREEN

 

PAUSE/

PLAY FF/

 

 

 

 

SHIFT

 

/REW REV PLAY STILL

TRACKING

V. LOCK

TIMER SEARCH COUNTER LOCK CNT RESET

MENU

TIME MODE

 

 

 

 

 

 

 

SET

AG-

REV ADV

FWD ADV

 

 

 

 

 

 

 

 

[PAUSE/STILL] button

 

 

 

[ON SCREEN 7f] button

 

 

 

 

[POWER] button

[TIME MODE +/–] button

 

 

 

1Press the [POWER] button to turn the operating mode on.

[The [POWER] indicator lights.

2Select the recording speed mode with the [TIME MODE +/–] button.

For details, refer to “5-2 Recording/Playback Speed Mode Selection” on page 28.

3Select the on-screen display position with the [ON SCREEN 7/f] button.

4Insert a cassette with safety tab in place.

[The () cassette indicator lights on the display.

*If a cassette is loaded when the operating mode is off, the operating mode is switched on automatically (auto operate on function).

5Press the [REC] button to start recording.

[ The recording indictor lights on the display, showing that the Record mode is engaged.

*No sound is recorded during Timelapse Recording.

To stop recording temporarily

6Press the [PAUSE/STLL] button.

[The record-pause indicator is shown on the display and the Pause mode is engaged.

*If the VCR remains in the Record-Pause mode for about 3 minutes, the head drum stops rotating to protect the tape. Although the Record-Pause mode remains engaged, there may be some distortion in the picture at the recording transition when you start recording again.

To start recording again

7Press the [REC] button.

[ The record-pause indicator on the display goes out and the Recording mode is engaged.

To check the recording

●To check recording in the Timelapse mode, the recording duration must be equivalent to at least 8 seconds at 2H(SP) or 6H(EP) speed. Recording check cannot be performed correctly if the recording duration is too short. (Example : In the 960-hour normal timelapse mode, the recording duration shoud be 64 minutes or more.)

●During recording check, the audio signal is not output.

5Press the [REC REVIEW] button during recording.

→The tape is automatically played back in reverse for about 5 seconds, then the Play mode is engaged to allow you to check recording. After the sequence has played back, the recording mode is automatically re-engaged at the point where the recording was interrupted.

•During playback in the Recording Check mode, check the picture to ensure that the recording is satisfactory. If the signals are not recorded properly, the built-in head cleaner cleans the heads and recording continues. In this case, the error code “E-09” is shown on the display for about 10 seconds.

[REC REVIEW] button

During

 

 

Recording

 

Normal

Recording

 

 

 

 

 

 

 

 

 

 

recording

 

 

check

 

 

 

 

 

 

 

 

 

 

Defective

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Error code “E-09” is

Auto head

 

 

Recording

shown for 10 seconds.

cleaning

 

Note:

•When a tape recorded in this unit is played back on another VCR (except another AG-TL950P), noise may appear in the picture.

To stop recording

8Press the [STOP] button.

[The tape stops and the Stop mode is engaged.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Operating VQT9726Safety Precautions InformationLock indicator Lock button Operation LockTime MODE+/- button Page Contents Major Features IntroductionPeriodical Maintenance PrecautionsIntroduction Regarding S-VHS ET Recording Inspection procedureDaily Inspection Erasure prevention tabControls and Connectors Front PanelControls and Connectors Display Rear Panel Series REC OUT series recording signal output terminal COM common ground terminalConnecting to a Camera ConnectionsSystem Using Sequential Switcher ConnectionsConnecting the Rear Panel Input/Output Terminal Connections On-Screen Display ON-SCREEN/MENU SwitchesDisplay items On Screen Mode screen Changing the on-screen display brightnessON-SCREEN/MENU Switches Contents of the main menu itemsMain Menu Display Date and Time Setting Time setting item and the hour digit blinksSet to OFF During Daylight Savings time Time setting for 29 seconds or lessHour Meter Display Standard timeAlarm Input/Power Loss Data Display Resetting alarm input/power loss failure dataWith the second item Menu Switch Setting Contents of Menu Switches Screens Items Set values Screens Set values FunctionDuration SEC Mode StopREC T-MODE ContinueAuto operate on PreparationCassette Loading/Unloading Auto playHigh-Density Recording Recording/Playback Speed Mode SelectionPreparation 120Recording Switch Setting During RecordingMenu switch settings ConnectionRecording Recording Basic OperationTimer Recording Timer Recording Program SettingPreparation To program timer recording at another time or day RPT Timer recording is executed on the specified dayOFF Programmed timer recording is not executed Press the Shift 7 button so that the next settingProgramming timer recording for more than 24 hours Timer button Menu buttonShift 7 button Shift f button Program Timer screen Recording speed On Enabled OFF DisabledStop time Start time Day of the week Holiday SET screen Holiday Timer Recording SettingT + Timer button Menu button SET button SET + button MonthDayTo stop timer programming before finishing Canceling/Changing Timer Recording ProgramTo modify timer programs To cancel preset timer programsIf programmed data overlap During timer recordingTimer recording If no cassette is loadedAlarm Recording Timelapse Alarm Recording Alarm signal input48H/NORMAL Setting the on-screen brightness and display items Tape END ModeSetting the alarm buzzer Setting the HDRSensor Recording When set to AL/SENSOR, both alarm recordingAlarm signals are input Sensor recording will be performedOperation Series RecordingConnections Repeat for all connected VCRsCounter value Connection SettingNon-stop continuous series recording Second VCR First VCRRepeat Recording ALARM/SENSOR ModeWhen the Auto REC Check menu switch is set to on Operation of the automatic recording check functionVCR control signal ground signal Recording with External VCR Activation SignalAlarm search/date and time search SRI/EXT Mode screenVTR Mode screen How to Restore Recording After Power FailureExternal Timer Recording Tape End BuzzerPlayback Menu switch settingPreparation To stop playbackStill playback Playback and SPECIAL-EFFECTS PlaybackSpecial-Effects Playback Field advance playbackREW button Shuttle search reverse and fast-forward playbackFast-forward shuttle search Reverse shuttle search Play buttonAlarm search setting screen Alarm Search/Date and Time SearchAlarm search Alarm numberDate/Time Search mode is canceled Alarm scanIs located, the Stop mode is engaged Date/time searchCounter Memory Function CNT Reset button Display buttonRepeat Playback Auto rewindTracking/V. Lock Adjustment Lock +/- buttons Tracking +/- buttonsTroubleshooting Error IndicationsError Contents VCR operation Measures Troubleshooting No Error IndicationAppendixes Tape Reel Counter/Tape Remaining Time TableAppendixes Terminals Signal levels Remarks 2H/6H recordingRecording signal input Rear Panel’s Inputs/OutputsTime/date SpecificationsAlarm Video SystemWestern Zone Office Security Systems GroupEastern Zone Office Industrial Medical Group

AG-TL950 specifications

The Panasonic AG-TL950 is a professional-grade broadcast monitor designed to meet the rigorous standards of the film and television industry. This monitor is particularly geared towards production environments that require precision, reliability, and high-quality imaging. With its rich feature set and advanced technologies, the AG-TL950 is a powerful tool for any broadcast or film professional.

One of the standout features of the AG-TL950 is its high-resolution display. The monitor supports 4K resolution, providing crystal-clear image quality and allowing users to see fine details that are critical during production and editing processes. This high resolution, combined with excellent color accuracy, ensures that content creators can trust the colors they are seeing on-screen, which is essential for color grading and post-production work.

The AG-TL950 also employs advanced HDR (High Dynamic Range) technology, which enhances the monitor’s contrast and color range, allowing for a more realistic and immersive viewing experience. This makes it particularly valuable for filmmakers and production teams working on projects that require adherence to modern HDR standards.

Connectivity is another strong suit of the AG-TL950. The monitor is equipped with a variety of input options, including 12G-SDI, HDMI, and both analog and digital audio inputs. This flexibility allows it to integrate smoothly into existing production workflows and ensures compatibility with a wide range of video sources.

In addition to its impressive visual capabilities, the AG-TL950 includes essential features for professional monitoring. It offers waveform and vector scope displays, allowing users to analyze and adjust their signals accurately. Furthermore, the monitor has customizable monitoring options, enabling users to set up to 16 user-defined presets for quick access to their most-used settings.

The design of the AG-TL950 reflects its professional focus, with a robust build quality that speaks to its reliability in dynamic production environments. Its lightweight design makes it easy to transport, while the wide viewing angles ensure that multiple crew members can view the monitor clearly from different positions.

In conclusion, the Panasonic AG-TL950 monitor integrates advanced display technology, versatile connectivity, and user-friendly monitoring features. It stands out as an essential tool for professional filmmakers and broadcast engineers, enabling them to create high-quality visuals with accuracy and confidence.
Top Page Image Contents