Panasonic WV-NP472E operating instructions Network Setup of the PC

Page 23

■Network Setup of the PC

To set up the network of the PC, first change the TCP/IP settings of the PC to match them to the default settings of the camera.

The following are the default network settings of the camera.

IP address	: 192.168.0.10
Subnet mask	: 255.255.255.0
Default gateway	: 192.168.0.1

To access the camera, the IP address of the PC should be “192.168.0.XXX” (where XXX should be a number from 2 to 254 except 10).

Note: The following procedure is described based on the assumption that the Windows XP is running on the PC. When running an OS other than Windows XP, see the manual included with the OS.

1. Start up your PC.

2. Click the “Start” button and select “Control Panel”.

3. Double-click the “Network and Internet Connections” icon.

4. Double-click the “Network Connections” icon.

5.Click “Local Area Communication”, and then click “Change settings of this connection” in the “Network Task” menu.

-23-

Image 23

Contents Operating Instructions Risk of Electric Shock Do not Open Contents TCP/IP, HTTP, FTP, SMTP, DNS, Dhcp PrefaceNever face the camera toward the sun PrecautionsClean the CCD faceplate with care Handle the camera with careMajor Operating Controls and Their Functions Mounting the Lens Notes InstallationsReplacement of Auto Iris Lens Connector Pictures Upside-down Flange-back AdjustmentMounting from the Bottom Mounting from the TopVideo Cable Connections Power-in ConnectionsConnections Control Terminal ConnectionsConnection to Internet Type Connection to Intranet TypeOperating the Camera Access from the PCPreliminary Setup Function Comparison / PC Network vs. Camera site Access from the Camera/System DeviceNetwork Speed Select a speed ¡From the PC Prior to SET UPButtons Used for Setup Menus Camera Setup Menus¡From the Camera Camera Identification Camera ID Setting Setting ProceduresALC Mode with SUPER-D2 on Light Control Setting ALC/ELCALC Mode with SUPER-D2 OFF and ELC Mode Shutter Speed Setting ShutterGain Control Setting AGC on DNR-H, DNR-L/OFF ATW1 Auto-Tracing White Balance White Balance Setting White BALAuto-Tracing White Balance Mode ATW Electronic Sensitivity Enhancement Sens UPManual Fine Adjustment for AWC ATW Motion Detector Setting Motion DETLens Drive Signal Selection Lens Drive Date Display Clock SettingSpecial Menu Http Port Number To reset to the factory settings Camera ResetConnection to Intranet Type SET UP from the PCConnections Connection to Internet TypeNetwork Setup of the PC Network Setup of the Camera Dhcp Network Setup Parameters vs. Connection TypeConnection type Description of the parameter DNSSet to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Return button Setup Menu buttonDay & Night Mode Setup buttons ON/OFF/AUTO Reset button ALL ResetCamera Setup Menus Image Capture Size pixels 752x568*, 752x280, 368x280 PC Oriented SET UPAlarm Setup Image Setup FTP Client Setup User Setup System Setup Host SetupInitializing Html Files Initializing the Setup MenuInitializing Initializing the Camera MenuImage Capture Size pixels 752x568 Viewing PicturesImage Quality Selection Monochrome Mode Transferring Picture Files Alarm FunctionsWhen an Alarm Arises Enter Canceling Alarm DisplayVMD Setup Detection Area SetupReviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output ControlTroubleshooting Camera Section SpecificationsGeneral Network SectionOptional Accessories Standard Accessories2003