Panasonic WV-NP472E To reset to the factory settings Camera Reset, Http Port Number

Page 21

To reset to the factory settings (CAMERA RESET)

1.Move the cursor to CAMERA RESET. PUSH SW is highlighted.

2.While holding down L and M, hold down I for 2 seconds or more. The camera is reset to the factory settings.

NETWORK SET UP

Set up network parameters when connecting the 10/100BASE jack with a network.

Notes:

•Access the setup menu from the PC to use the DHCP or DNS server, because these settings are not included in this window.

•Ask your system administrator or ISP (Internet Service Provider) about available IP address, sub- net mask, and gateway, prior to setup.

•The assigned address should be a global type when connecting via the Internet. Ask your ISP whether it is.

** NETWORK SET UP **

IP ADDRESS

192.168. 0. 10

NETMASK

255.255.255. 0

GATEWAY

192.168. 0. 1

HTTP PORT NO. 80

RET END

1.Move the cursor to NETWORK SET UP in the SET UP menu window and press I. The NETWORK SET UP menu opens.

The factory default settings are as follows. IP ADDRESS: 192.168.0.10 NETMASK: 255.255.255.0 GATEWAY: 192.168.0.1

HTTP Port Number: 80

2.Move the cursor to the line you wish to edit, and press I.

Parameters become editable.

3.Select a digit using J or K.

4.Select a number in the digit using L or M.

5.Repeat steps 2, 3 and 4 above appropriately until all parameters are set.

6.Move the cursor to END and press I to close the setup menu and store new settings, or select RET to go back to the SET UP menu.

Note: The port number assigned to the camera is exclusive, and any other usage is not allowed.

-21-

Image 21

Contents Operating Instructions Risk of Electric Shock Do not Open Contents TCP/IP, HTTP, FTP, SMTP, DNS, Dhcp PrefaceClean the CCD faceplate with care PrecautionsHandle the camera with care Never face the camera toward the sunMajor Operating Controls and Their Functions Installations Replacement of Auto Iris Lens ConnectorMounting the Lens Notes Mounting from the Bottom Flange-back AdjustmentMounting from the Top Pictures Upside-downConnections Power-in ConnectionsControl Terminal Connections Video Cable ConnectionsConnection to Internet Type Connection to Intranet TypeAccess from the PC Preliminary SetupOperating the Camera Access from the Camera/System Device Network Speed Select a speedFunction Comparison / PC Network vs. Camera site Buttons Used for Setup Menus Prior to SET UPCamera Setup Menus ¡From the PC¡From the Camera Camera Identification Camera ID Setting Setting ProceduresALC Mode with SUPER-D2 on Light Control Setting ALC/ELCShutter Speed Setting Shutter Gain Control Setting AGC on DNR-H, DNR-L/OFFALC Mode with SUPER-D2 OFF and ELC Mode Auto-Tracing White Balance Mode ATW White Balance Setting White BALElectronic Sensitivity Enhancement Sens UP ATW1 Auto-Tracing White BalanceLens Drive Signal Selection Lens Drive Motion Detector Setting Motion DETDate Display Clock Setting Manual Fine Adjustment for AWC ATWSpecial Menu Http Port Number To reset to the factory settings Camera ResetConnections SET UP from the PCConnection to Internet Type Connection to Intranet TypeNetwork Setup of the PC Network Setup of the Camera Connection type Description of the parameter Network Setup Parameters vs. Connection TypeDNS DhcpSet to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Day & Night Mode Setup buttons ON/OFF/AUTO Setup Menu buttonReset button ALL Reset Return buttonCamera Setup Menus PC Oriented SET UP Alarm Setup Image SetupImage Capture Size pixels 752x568*, 752x280, 368x280 FTP Client Setup User Setup System Setup Host SetupInitializing Initializing the Setup MenuInitializing the Camera Menu Initializing Html FilesViewing Pictures Image Quality SelectionImage Capture Size pixels 752x568 Monochrome Mode Alarm Functions When an Alarm ArisesTransferring Picture Files VMD Setup Canceling Alarm DisplayDetection Area Setup EnterReviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output ControlTroubleshooting General SpecificationsNetwork Section Camera SectionOptional Accessories Standard Accessories2003